The 2015 Ford F-150 is a robust and succesful pickup truck. Should you’re planning on towing a trailer, you will want to put in a brake controller to make sure that your trailer’s brakes are working correctly. Putting in a brake controller just isn’t a tough job, but it surely does require some fundamental electrical data. On this article, we’ll stroll you thru the steps on learn how to add a brake controller to your 2015 F-150.
Earlier than you start, you will want to collect a couple of instruments and supplies. You may want a brake controller, a wiring harness, a drill, and a screwdriver. You may additionally must seek the advice of your truck’s proprietor’s handbook to find the right wiring diagram. After you have all the pieces you want, you are prepared to start the set up course of.
Step one is to find the brake controller mounting bracket. The bracket is normally positioned beneath the dashboard, on the driving force’s aspect. As soon as you have discovered the bracket, you will must drill a couple of holes to mount the brake controller. As soon as the brake controller is mounted, you will want to attach the wiring harness. The wiring harness will join the brake controller to the truck’s electrical system. As soon as the wiring harness is related, you will want to check the brake controller to be sure that it is working correctly. To do that, merely apply the brakes in your truck and be sure that the trailer’s brakes are additionally engaged.
Mounting the Brake Controller
To mount the brake controller, you will want the next instruments:
Phillips head screwdriver
Flat-blade screwdriver
Drill
1/4-inch drill bit
1/2-inch drill bit
7/16-inch wrench
Wire strippers
Electrical tape
Drilling the Gap for the Brake Controller
1. Use the 1/4-inch drill bit to drill a pilot gap within the desired location for the brake controller.
2. Use the 1/2-inch drill bit to widen the outlet to 1/2 inch.
3. Insert the brake controller into the outlet and tighten the mounting screws.
Wiring the Brake Controller
1. Join the purple wire from the brake controller to the constructive terminal on the battery.
2. Join the black wire from the brake controller to the adverse terminal on the battery.
3. Join the blue wire from the brake controller to the brake swap on the brake pedal.
4. Join the white wire from the brake controller to the bottom terminal on the chassis.
Testing the Brake Controller
1. Begin the engine and apply the brakes.
2. The brake controller ought to activate and the brake lights ought to come on.
3. If the brake controller doesn’t activate, verify the wiring connections and be sure that the brake swap is correctly adjusted.
Connecting the Trailer Brake Wires
Now that you’ve a appropriate brake controller and the mandatory instruments, listed here are the detailed steps to attach the trailer brake wires:
Step 1: Collect Your Supplies
Earlier than beginning, guarantee you may have all the mandatory supplies, together with the brake controller, wiring harness, electrical tape, wire strippers, and crimp connectors.
Step 2: Find the Wiring Harness
Establish the brake controller wiring harness in your truck. It’s sometimes positioned behind the dashboard or beneath the steering column.
Step 3: Join the Energy Wires
Join the black wire from the controller to a floor level on the truck’s body utilizing a crimp connector. Join the yellow wire to a continuing 12-volt energy supply, such because the battery or ignition swap.
Step 4: Join the Brake Output Wires
Establish the blue and purple wires from the controller. Crimp the blue wire to the brake gentle swap wire, sometimes a inexperienced wire, utilizing a butt connector. Crimp the purple wire to the stoplight wire.
Step 5: Join the Trailer Wires
Find the trailer’s wiring harness and join the controller’s black wire to the white wire on the trailer. Join the controller’s yellow wire to the brown wire on the trailer.
Step 6: Join the Brake Sign Wire
Join the blue wire from the controller to the blue wire on the trailer’s brake circuit. This wire sends the brake sign to the trailer’s brakes.
Step 7: Double-Verify and Insulate
Totally verify all connections to make sure they’re safe and insulated. Wrap electrical tape round all uncovered wire ends and any connections made with crimp connectors. This prevents quick circuits and ensures a dependable connection.
Step 8: Check the System
Join the trailer to the truck and take a look at the brake controller. Press the brake pedal and observe if the trailer’s brakes are activated. Regulate the controller’s settings as wanted for optimum braking efficiency.
| Wire Colour (Truck) | Operate | Connection |
|---|---|---|
| Black | Floor | Truck body |
| Yellow | Energy | Battery or ignition swap |
| Blue | Brake Sign | Brake gentle swap |
| Pink | Stoplight | Stoplight wire |
| Wire Colour (Trailer) | Operate | Connection |
|---|---|---|
| White | Floor | Controller black wire |
| Brown | Energy | Controller yellow wire |
| Blue | Brake Sign | Controller blue wire |
Putting in the Brake Gentle Change
The brake gentle swap is accountable for activating the brake lights when the brake pedal is depressed. To put in the brake gentle swap, comply with these steps:
1. Find the brake gentle swap on the brake pedal meeting. It’s normally positioned close to the highest of the pedal.
2. Disconnect {the electrical} connector from the brake gentle swap.
3. Use a wrench to take away the brake gentle swap from the brake pedal meeting.
4. Apply a small quantity of grease to the threads of the brand new brake gentle swap.
5. Set up the brand new brake gentle swap into the brake pedal meeting.
6. Tighten the brake gentle swap utilizing a wrench.
7. Join {the electrical} connector to the brake gentle swap.
8. Depress the brake pedal to check the brake gentle swap. The brake lights ought to illuminate when the brake pedal is depressed.
Checking the Brake Gentle Change
In case you are having issues together with your brake lights, you possibly can verify the brake gentle swap to see whether it is defective. To verify the brake gentle swap, comply with these steps:
1. Disconnect {the electrical} connector from the brake gentle swap.
2. Use a multimeter to verify for continuity between the 2 terminals of the brake gentle swap.
3. If there isn’t any continuity, the brake gentle swap is defective and must be changed.
Sustaining the Brake Controller
To make sure your brake controller capabilities correctly and safely, common upkeep is important. Listed here are some key steps to comply with:
- Examine the Brake Controller: Recurrently examine the brake controller for any indicators of harm, corresponding to unfastened connections or frayed wires.
- Clear the Brake Controller: Use a delicate fabric and gentle detergent to softly clear the brake controller to take away grime and mud.
- Verify the Brake Pedal Sensitivity: The brake pedal sensitivity needs to be adjusted to fit your driving model and cargo weight. Check with the brake controller handbook for steerage.
- Check the Brake Controller: Conduct a take a look at drive with the trailer connected to confirm that the brake controller is working accurately.
- Confirm Trailer Brake Operation: Examine the trailer brakes to make sure they’re correctly activated when making use of the brake pedal.
- Lubricate the Brake Controller: If specified by the producer, lubricate the brake controller as per the offered directions.
- Replace the Brake Controller Firmware: If firmware updates can be found, set up them to boost the brake controller’s performance and tackle any potential points.
- Examine Wiring and Connections: Totally look at the wiring and connections for any harm, corrosion, or unfastened terminals, particularly these uncovered to the weather.
- Use High quality Parts: Be certain that all parts used with the brake controller, corresponding to trailer wiring and connectors, are high-quality and appropriate together with your automobile and trailer.
- Check with the Person Guide: At all times seek the advice of the brake controller person handbook for particular upkeep directions and troubleshooting ideas.
| Extra Upkeep Ideas |
|---|
| – Verify the brake fluid stage recurrently and high it off if crucial. |
| – Have your complete brake system inspected and serviced by a certified mechanic as advisable by the automobile producer. |
| – Retailer the brake controller in a dry and guarded location when not in use. |
2015 F150 How To Add Brake Controller
Should you’re towing a trailer together with your 2015 F150, you will want to put in a brake controller. It will assist you to manually management the trailer’s brakes, which is necessary for security and stopping accidents.
Here is a step-by-step information on learn how to set up a brake controller in your 2015 F150:
- Collect your supplies. You may want a brake controller, wiring harness, and mounting bracket.
- Disconnect the adverse battery terminal.
- Find the brake pedal meeting. The brake controller will likely be mounted beneath the sprint, to the left of the brake pedal.
- Set up the mounting bracket. The bracket will likely be connected to the brake pedal meeting utilizing the offered bolts.
- Join the wiring harness to the brake controller. The wiring harness will likely be plugged into the brake controller and the brake pedal meeting.
- Join the adverse battery terminal.
- Check the brake controller. Apply the brakes and be sure that the trailer’s brakes are additionally participating.
Folks Additionally Ask About 2015 F150 How To Add Brake Controller
Can I set up a brake controller myself?
Sure, you possibly can set up a brake controller your self you probably have some fundamental automotive data and instruments.
The place is one of the best place to mount a brake controller?
The very best place to mount a brake controller is beneath the sprint, to the left of the brake pedal. This provides you with easy accessibility to the controller whereas driving.
What sort of brake controller do I want for my 2015 F150?
You will want a brake controller that’s appropriate together with your 2015 F150’s towing capability. Seek the advice of your proprietor’s handbook or a certified technician to find out the right brake controller on your automobile.
