The Stihl PolyCut 6.2 is a flexible slicing head designed to be used with Stihl trimmers. It incorporates a sturdy plastic building and a singular blade design that gives clear, exact cuts by means of grass and weeds. Eradicating the pinnacle is a straightforward course of that may be accomplished in only a few steps. First, make sure that the trimmer is turned off and disconnected from the facility supply. Subsequent, find the 2 screws that safe the pinnacle to the trimmer shaft. Utilizing a screwdriver, loosen the screws and take away the pinnacle from the shaft. Lastly, take away the road from the pinnacle and discard the previous line.
To put in the brand new line, feed the top of the road by means of the outlet within the facet of the pinnacle. Pull the road by means of till it reaches the specified size, then minimize the surplus line. Insert the road into the slot on the pinnacle and safe it with the screws. Lastly, reattach the pinnacle to the trimmer shaft and tighten the screws. Your Stihl PolyCut 6.2 is now prepared to make use of.
The Stihl PolyCut 6.2 is a sturdy and easy-to-use slicing head that gives wonderful efficiency. By following these easy steps, you may simply take away and substitute the pinnacle, guaranteeing that your trimmer is all the time able to deal with any slicing job.
Security Precautions Earlier than Eradicating the Head
Earlier than you start eradicating the pinnacle in your Stihl Polycut 6.2, it’s essential to take the required security precautions. These measures guarantee your security and stop any potential accidents or injury to the tools.
Sporting Acceptable Security Gear
At all times put on acceptable security gear when working with energy instruments. This consists of security glasses to guard your eyes from flying particles and a mud masks to stop the inhalation of dangerous particles. Moreover, put on gloves to guard your palms from cuts and abrasions
Guaranteeing the Device is Unplugged
Earlier than trying to take away the pinnacle, make sure that the Stihl Polycut 6.2 is unplugged from any energy supply. This prevents the unintentional activation of the machine, which might result in accidents.
Safe Work Space
Select a steady and well-lit work space to carry out the pinnacle elimination course of. Be certain that the world is free from tripping hazards and different potential obstacles.
Different Precautions
- Permit the Stihl Polycut 6.2 to chill down utterly earlier than eradicating the pinnacle.
- Use correct instruments for the duty. Keep away from utilizing extreme pressure or the mistaken instruments, as this might injury the tools.
- In the event you encounter any difficulties or uncertainties, don’t hesitate to seek the advice of the person handbook or search skilled help.
Finding the Launch Button for the Head
Step 1: Familiarize Your self with the Trimmer’s Head
The Stihl Polycut 6.2 trimmer head is a removable part that homes the slicing line. It’s sometimes positioned on the finish of the trimmer’s shaft.
Step 2: Establish the Launch Button
The discharge button for the pinnacle is normally positioned on the facet or prime of the trimmer head. It’s typically a small, round button or lever with a notch or indentation. In some fashions, the discharge button could also be partially hidden beneath a protecting cowl. Seek the advice of your trimmer’s person handbook or seek advice from the diagram beneath for the particular location of the discharge button in your Stihl Polycut 6.2 trimmer.
Step 3: Press and Maintain the Launch Button
Upon getting positioned the discharge button, press and maintain it firmly. Preserve your thumb or finger on the button till the pinnacle loosens and comes free from the trimmer shaft. Chances are you’ll want to use some downward stress on the pinnacle whereas urgent the button to disengage it utterly.
Step 4: Take away the Head
As soon as the discharge button is engaged, gently pull the pinnacle straight up and away from the trimmer shaft. Keep away from twisting or extreme pressure, as this will injury the trimmer or the pinnacle.
Urgent the Launch Button
Find the discharge button on the Stihl Polycut 6.2 trimmer head. It’s sometimes a small, spherical or oval button positioned close to the middle of the pinnacle.
Pulling the Head Off
As soon as the discharge button is pressed, grasp the trimmer head firmly and pull it straight off the driveshaft. Don’t twist or flip the pinnacle, as this might injury the connection.
Eradicating the Line
With the pinnacle eliminated, now you can entry the trimmer line. To take away the previous line, merely pull it out of the road holes within the head. You should definitely take away all the previous line earlier than putting in new line.
| Step | Motion | Particulars |
|---|---|---|
| 1 | Find the discharge button | It’s normally a small, spherical or oval button close to the middle of the pinnacle. |
| 2 | Press the discharge button | Maintain it down whereas concurrently pulling the pinnacle off the driveshaft. |
| 3 | Take away the road | Pull the previous line out of the road holes within the head. Take away all the previous line earlier than putting in new line. |
As soon as the previous line is eliminated, you may set up new line by following the directions in your Stihl Polycut 6.2 trimmer handbook.
Inspecting the Head for Put on or Harm
Common inspection of the slicing head is essential to make sure optimum efficiency and prolong its lifespan. This is an in depth information on easy methods to examine the Polycut 6.2 slicing head for put on or injury:
- Visible Inspection: Fastidiously look at the pinnacle for any seen indicators of damage, corresponding to cracks, chips, or lacking enamel. If any injury is current, it is advisable to switch the pinnacle instantly.
- Examine for Free Tooth: Maintain the slicing head firmly and gently shake it to test for any unfastened or rattling enamel. Free enamel can result in uneven slicing and needs to be changed or tightened.
- Examine the Washers: Take away the slicing head and test the washers for any indicators of damage or deformation. Change any broken washers to make sure correct alignment and stop extreme vibration.
- Measure the Head Diameter: Utilizing a caliper or measuring tape, measure the diameter of the slicing head. The best diameter needs to be inside the producer’s specs. A decreased diameter signifies put on that may have an effect on slicing effectivity and needs to be changed.
- Check the Chopping Efficiency: Set up the slicing head on the trimmer and carry out a take a look at minimize in a delegated space. If the slicing is uneven or requires extreme pressure, it is doubtless that the pinnacle is worn or broken and must be changed.
Desk of Acceptable and Unacceptable Chopping Head Dimensions
| Dimension | Acceptable Vary | Unacceptable Vary |
|—|—|—|
| Diameter | 6.2 inches | Lower than 6.1 inches |
| Thickness | 0.1 inches | Lower than 0.09 inches |
Checking the Drive Shaft for Obstructions
If the Stihl Polycut 6.2 trimmer head isn’t rotating accurately, there could also be an obstruction within the drive shaft. To test for obstructions:
-
Take away the trimmer head from the shaft.
-
Insert a small wire or rod into the drive shaft.
-
If the wire or rod encounters any resistance, there may be an obstruction.
-
Take away the obstruction utilizing a pair of pliers or a wire brush.
-
Clearing a Clogged Drive Shaft with Compressed Air:
- Use a compressor to direct a stream of compressed air into the drive shaft.
- Maintain the trimmer shaft upright to permit the air to blow out any particles or blockages.
- Repeat the method till the air flows freely by means of the shaft.
| Instruments Wanted: | Steps: |
|---|---|
| Wire or rod | Insert into drive shaft to test for obstructions |
| Pliers or wire brush | Take away obstructions |
| Compressor with compressed air | Blow out particles and clear clogs |
Reinstalling the Head on the Drive Shaft
After cleansing or servicing, it is time to put the pinnacle again on the drive shaft:
-
Align the pin on the pinnacle with the notch on the drive shaft.
-
Push the pinnacle onto the shaft till it clicks into place.
6. Securing the Head with a Torx Screw
-
Find the Torx screw on the facet of the pinnacle, subsequent to the drive shaft.
-
Tighten the screw snugly utilizing a Torx screwdriver. This helps stop the pinnacle from by accident detaching throughout use.
Observe: Don’t overtighten the screw, as this will injury the pinnacle.
5.
Examine the pinnacle for any wobble or looseness. It needs to be securely mounted on the drive shaft.
As soon as the pinnacle is securely reinstalled, your Stihl Polycut 6.2 is able to use once more.
Step 1: Examine for Attachment
Be certain that the pinnacle is securely connected to the trimmer shaft by holding the pinnacle in a single hand and the shaft within the different. Search for any gaps or indicators of motion between the pinnacle and the shaft.
Step 2: Loosen the Locking Nut
Utilizing the provided Allen key, find the locking nut on the pinnacle. Grip the locking nut firmly and switch it counterclockwise to loosen it. Don’t take away the nut utterly.
Step 3: Take away the Washer
As soon as the locking nut is unfastened, gently pull the washer behind it off the shaft. Be cautious to not lose the washer.
Step 4: Pull off the Head
Maintain the pinnacle firmly and pull it straight off the shaft. The top ought to slide off simply if it’s not seized or broken.
Step 5: Clear and Examine
Take this chance to scrub any grime or particles from the pinnacle and the shaft. Examine each parts for any injury or put on.
Step 6: Reassemble Head
To reassemble the pinnacle, merely comply with the steps in reverse order. Slide the pinnacle again onto the shaft, guaranteeing it’s absolutely seated. Change the washer and tighten the locking nut utilizing the Allen key.
Tightening the Head Utilizing the Allen Key
To make sure a safe match, use the provided Allen key to tighten the locking nut. Grip the locking nut firmly and switch it clockwise, making use of average torque. Keep away from overtightening, as this will injury the pinnacle or the shaft.
This is a desk summarizing the steps for tightening the pinnacle utilizing the Allen key:
| Step | Description |
|---|---|
| 1. | Find the locking nut on the pinnacle. |
| 2. | Grip the locking nut and switch it clockwise utilizing the Allen key. |
| 3. | Apply average torque to tighten the nut, however keep away from overtightening. |
Verifying Correct Head Alignment
Step 1: Examine the Head Bolt
Find the pinnacle bolt that secures the slicing head to the trimmer shaft. Guarantee it is tight and correctly aligned.
Step 2: Examine the Chopping Head
Study the slicing head for any injury, cracks, or unfastened parts. If any irregularities are current, substitute the pinnacle.
Step 3: Align the Head with the Shaft
With the pinnacle bolt unfastened, manually rotate the slicing head till it aligns completely with the trimmer shaft. Guarantee the pinnacle is perpendicular to the shaft and the drive system.
Step 4: Tighten the Head Bolt
Tighten the pinnacle bolt securely utilizing a wrench or socket. Keep away from overtightening, as this will injury the bolt or the trimmer.
Step 5: Check the Alignment
Begin the trimmer and have interaction the slicing head. Hear for any uncommon noises or vibrations. If current, it signifies improper head alignment. Repeat steps 3-4 till correct alignment is achieved.
Step 6: Extra Alignment Examine
To make sure optimum alignment, maintain the trimmer vertically and let the slicing head dangle freely. If the pinnacle would not dangle completely plumb, regulate the pinnacle bolt till it does.
Step 7: Reassembly
Reassemble the trimmer housing and some other eliminated parts. Tighten all screws and bolts securely.
Step 8: Remaining Inspection
Conduct a remaining inspection of the slicing head and trimmer earlier than utilizing it. Guarantee all elements are correctly aligned and securely fixed.
Troubleshooting Head Removing Points
1. Examine the Retainer Nut
Examine if the retainer nut is correctly tightened. If unfastened, use a wrench to tighten it securely.
2. Clear the Threads
Take away any grime or particles that will have collected on the threads of the pinnacle or retainer nut utilizing a brush or compressed air.
3. Apply Lubricant
Apply a small quantity of lubricant to the threads to scale back friction and support in elimination.
4. Use a Correct Wrench
Guarantee you’re utilizing a wrench that matches the retainer nut correctly to keep away from stripping the pinnacle or nut.
5. Leverage and Drive
Apply even leverage and pressure to the wrench whereas turning it counterclockwise to loosen the retainer nut.
6. Examine the Head
As soon as the retainer nut is eliminated, examine the pinnacle for any injury or deformation that could be stopping its elimination.
7. Modify the Throttle Place
Make sure the throttle is within the “STOP” place earlier than trying to take away the pinnacle.
8. Examine for Extra Fasteners
Some STIHL Polycut fashions might have extra fasteners securing the pinnacle. Find and take away these earlier than eradicating the pinnacle.
9. Use a Vise or Mallet
If the pinnacle remains to be caught, safe it in a vise and gently faucet it with a mallet to interrupt the bond that will have shaped between the pinnacle and shaft. Keep away from extreme pressure to stop injury.
| Difficulty | Resolution |
|---|---|
| Head will not budge | Apply warmth to the pinnacle with a warmth gun or blow dryer, then try and take away |
| Retainer nut is stripped | Change the retainer nut |
| Head is broken | Change the pinnacle |
Ideas for Extending Head Lifespan
Comply with these tricks to maximize the lifespan of your Stihl Polycut 6.2 trimmer head:
1. Use the right trimmer line
The kind of trimmer line you utilize can have a major affect on the lifetime of your head. Use a line that’s suitable with the Stihl Polycut 6.2 and that’s designed for the kind of slicing you can be doing.
2. Wind the road correctly
When winding the road, be sure to comply with the instructions within the Stihl Polycut 6.2 person handbook. Improper winding could cause the road to interrupt prematurely.
3. Use the pinnacle on the right pace
The Stihl Polycut 6.2 is designed for use at a particular pace. Utilizing the pinnacle at too excessive or too low a pace could cause the road to interrupt.
4. Keep away from hitting onerous objects
Placing onerous objects with the Stihl Polycut 6.2 can injury the pinnacle and trigger the road to interrupt.
5. Clear the pinnacle recurrently
Particles can accumulate on the Stihl Polycut 6.2, which may trigger the road to turn out to be tangled and break. Clear the pinnacle recurrently to stop this from occurring.
6. Retailer the pinnacle correctly
When storing the Stihl Polycut 6.2, be sure to maintain it in a dry place. Moisture could cause the pinnacle to rust and deteriorate.
7. Change the pinnacle when needed
Even with correct care, the Stihl Polycut 6.2 will ultimately should be changed. Change the pinnacle when the road can now not be wound correctly or when the pinnacle is broken.
| Advisable Trimmer Line | Description |
|---|---|
| Stihl PolyCut 6.2 Trimmer Line | 0.080″ diameter, 150′ size |
| Stihl AutoCut 26-2 Trimmer Line | 0.095″ diameter, 165′ size |
Stihl Polycut 6.2 How To Take away The Head
The Stihl Polycut 6.2 is a strong and versatile trimmer that’s excellent for each residential and business use. It incorporates a 27.2 cc engine, a 17-inch slicing swath, and quite a lot of slicing attachments. One of the necessary issues to know in regards to the Polycut 6.2 is easy methods to take away the pinnacle. It is a easy course of that may be accomplished in only a few minutes.
To take away the pinnacle, first take away the spark plug wire and the gasoline line. Subsequent, unscrew the 2 bolts that maintain the pinnacle in place. As soon as the bolts are eliminated, you may pull the pinnacle straight off of the shaft. Watch out to not lose the washer that’s positioned between the pinnacle and the shaft.
If you find yourself reattaching the pinnacle, you’ll want to tighten the bolts securely. Over-tightening the bolts can injury the pinnacle or the shaft. As soon as the pinnacle is reattached, reconnect the spark plug wire and the gasoline line.
Individuals Additionally Ask About Stihl Polycut 6.2 How To Take away The Head
What instruments do I have to take away the pinnacle from a Stihl Polycut 6.2?
You have to a wrench or socket to take away the 2 bolts that maintain the pinnacle in place.
Is it tough to take away the pinnacle from a Stihl Polycut 6.2?
No, it’s a easy course of that may be accomplished in only a few minutes.
Can I take away the pinnacle from a Stihl Polycut 6.2 with none instruments?
No, you will want a wrench or socket to take away the 2 bolts that maintain the pinnacle in place.
