As you put together to embark on the momentous event of commencement, it is important to grasp the correct etiquette and apparel for this vital occasion. One essential component of your commencement outfit is the educational hood, a logo of your educational achievements and the establishment you symbolize. Whether or not you are a first-time graduate or have skilled this special occasion earlier than, mastering the artwork of carrying your hood will make sure you exude confidence and honor the custom of this outstanding milestone. Let’s delve right into a complete information on learn how to put on a commencement hood, equipping you to step onto the stage with grace and poise.
Earlier than draping the hood over your shoulders, it is important to familiarize your self with its elements. The hood consists of three distinct elements: the physique, the liner, and the binding or trim. The physique is the principle cloth of the hood, usually fabricated from velvet or high-quality cloth. The liner is the inside cloth, which is normally fabricated from a contrasting shade to the physique. The binding or trim is a slender strip of cloth that borders the sting of the hood, including a contact of magnificence and distinction. When you perceive the hood’s anatomy, you are able to don it with satisfaction.
To put on the hood appropriately, start by figuring out the neck opening, which is situated behind the hood. Rigorously place the hood over your head, guaranteeing that the neck opening aligns comfortably round your neck. Alter the hood in order that it rests evenly in your shoulders, with the liner going through inward and the binding or trim framing the perimeters. The tassel, which represents your educational diploma, ought to cling down your again, aligned with the middle seam of the hood. As you stroll throughout the stage to obtain your diploma, carry the rolled-up diploma in your left hand and the tasseled finish of the hood in your proper hand, symbolizing your educational journey and the fruits of your arduous work and dedication.
Selecting the Proper Kind of Hood
The kind of hood you put on will rely in your educational diploma and the college you attended. There are two predominant sorts of hoods:
Grasp’s hoods are usually fabricated from velvet and are trimmed with velvet or satin of a contrasting shade. The colour of the velvet signifies the sector of examine, whereas the colour of the trim signifies the college.
Doctoral hoods are fabricated from silk or velvet and are trimmed with velvet. The colour of the silk or velvet signifies the sector of examine, whereas the colour of the trim signifies the college. Doctoral hoods are additionally typically lined with a cloth of a contrasting shade.
Along with the kind of hood, additionally, you will want to think about the dimensions and form of the hood. The scale of the hood must be proportionate to your physique dimension, and the form of the hood must be flattering to your face form.
Here’s a desk that summarizes the several types of hoods:
| Diploma | Hood Materials | Trim Materials | Coloration of Velvet/Silk | Coloration of Trim |
|---|---|---|---|---|
| Grasp’s | Velvet | Velvet or satin | Subject of examine | College |
| Doctoral | Silk or velvet | Velvet | Subject of examine | College |
Positioning the Hood Appropriately
The hood must be positioned symmetrically over the pinnacle, with the middle of the hood lining up with the middle of the pinnacle. The opening of the hood ought to body the face, with the tassel hanging down the again of the neck.
To make sure correct positioning, observe these steps:
- Place the hood over your head, with the tassel hanging down your again.
- Alter the hood in order that the middle of the hood lining up with the middle of your head.
- Easy out the hood in order that it hangs evenly on each side.
If the hood is just not positioned appropriately, it will possibly look sloppy and detract from the general look of the commencement apparel.
**Further Suggestions for Positioning the Hood Appropriately**
- If you’re carrying a hat, ensure that the hat is just not seen beneath the hood.
- If in case you have lengthy hair, it’s possible you’ll need to tie it again or put on it as much as stop it from getting tangled within the hood.
- If the hood is just too free, you need to use a security pin or bobby pin to safe it in place.
Adjusting the Straps
The straps of the hood must be adjusted to make sure a snug and safe match. Loosen the straps by pulling them out of the buckles on the shoulders. Place the hood in your head in order that the velvet edge rests alongside the highest of your brow and the tassel hangs down the again of your head. Alter the straps on each side till the hood matches snugly however not too tightly. Reinsert the straps into the buckles and tighten them to safe the hood in place.
Tassel
The tassel is usually worn on the appropriate aspect of the mortarboard, however this may occasionally range relying on the college’s traditions. The tassel can be utilized to point the diploma stage or subject of examine. Place the top of the wire with the tassel on the appropriate aspect of the mortarboard and safe it to the button or hook situated there. Make sure that the tassel hangs down on the appropriate aspect of the mortarboard and doesn’t hinder your view.
Adjusting the Hood
As soon as the hood is correctly positioned, it’s possible you’ll have to additional regulate it for a extra snug match. Verify that the velvet fringe of the hood is parallel to your eyebrows and that the tassel hangs straight down your again. If the hood sits too excessive or too low, use the drawstrings situated behind the hood to regulate the match. Pull the drawstrings to tighten the hood round your head and launch them to loosen it. Proceed adjusting the drawstrings till the hood matches comfortably and securely.
| Left-handed | Proper-handed |
|---|---|
| Tassel on the left aspect of the mortarboard | Tassel on the appropriate aspect of the mortarboard |
Managing Fringe and Piping
Align the Fringe
Make sure that the perimeter of your hood, often called the liripipe, is correctly aligned. It ought to cling straight down the middle of your again, with equal lengths on both aspect. Use a mirror or ask a buddy to examine for you.
Safe the Fringe
To forestall the perimeter from changing into tangled or blowing within the wind, use a small hair clip or security pin to safe it to your robe or cap. This can preserve it in place throughout the ceremony.
Deal with the Piping Rigorously
The piping, or the ornamental edging across the edges of the hood, will be delicate. Keep away from pulling or snagging it on different clothes or objects. When storing the hood, fold it alongside the seams to reduce creases and harm to the piping.
Formal Etiquette with a Hood
The tutorial hood is a ceremonial garment worn by graduates of upper training establishments. It’s a image of educational achievement and scholarship, and it’s usually worn over the commencement robe. There are particular guidelines of etiquette that govern the carrying of a hood, and it is very important observe these guidelines to make sure that you’re carrying your hood appropriately.
Positioning the Hood
The hood is positioned over the pinnacle, with the opening behind the neck. The hood ought to relaxation on the shoulders, and the tassel ought to cling down over the appropriate shoulder.
Lining Coloration and Form
The liner of the hood is usually fabricated from velvet or silk, and the colour of the liner signifies the diploma that the graduate has earned. The form of the hood additionally varies relying on the diploma.
Desk of Hood Lining Colours and Levels
| Diploma | Hood Lining Coloration |
|---|---|
| Doctorate | Black |
| Grasp’s Diploma | Royal Blue |
| Bachelor’s Diploma | Black |
| Affiliate’s Diploma | Inexperienced |
Tassel Placement
The tassel is connected to the hood, and it’s worn on the appropriate shoulder. The tassel is fabricated from gold or silver thread, and it represents the graduate’s educational achievement.
Carrying the Hood with Different Regalia
The hood is usually worn with different commencement regalia, akin to the robe and cap. The hood is positioned over the robe, and the cap is worn on the pinnacle. The hood shouldn’t be pinned to the robe or cap.
Carrying a Hood with a Cap or Mortarboard
1. **Place the Cap:** Place the mortarboard in your head, guaranteeing it sits securely and stage.
2. **Connect the Hood:** Take the hood and loop it excessive button of the cap.
3. **Cross the Ends:** Convey the 2 ends of the hood down over the tassel and cross them throughout your chest.
4. **Tie the Ends:** Tie the ends of the hood collectively on the waist, making a safe knot.
5. **Alter the Drape:** The hood ought to fall gracefully over your shoulders, reaching about mid-thigh.
6. **Understanding Hood Colours and Linings:**
| Diploma | Hood Coloration | Lining Coloration |
|---|---|---|
| Doctorate | Black or scarlet | Velvet in college colours |
| Grasp’s | Black | Satin in college colours |
| Bachelor’s | Black | Silk in college colours |
The liner of the hood is usually made out of the colours of the graduating college or educational establishment.
**Further Issues:**
- The tassel on the cap must be positioned on the appropriate aspect of the pinnacle for a graduate and on the left aspect for an undergraduate.
- If in case you have lengthy hair, contemplate styling it in a approach that does not hinder the view of the hood.
- Make sure that the hood and cap match comfortably and securely all through the ceremony.
Hood Etiquette: Pointers for Carrying Your Hood
Congratulations in your commencement! Your hood is a vital a part of your educational regalia, and it must be worn with satisfaction. Listed here are some ideas for carrying your hood correctly:
Troubleshooting Frequent Hood Points
Hood Not Becoming Correctly
In case your hood is just not becoming correctly, it might be as a result of it’s too giant or too small. If the hood is just too giant, you possibly can regulate it by folding the surplus cloth below the liner. If the hood is just too small, it’s possible you’ll have to buy a bigger one.
Hood Falling Off
In case your hood is falling off, it’s possible as a result of the wire is just not tied correctly. To tie the wire appropriately, place the tassel in your shoulder and cross the cords over your chest. Convey the cords again over your shoulders and tie them in a knot on the nape of your neck.
Hood Too Heavy
In case your hood is just too heavy, it may be a ache to put on. To make the hood lighter, you possibly can take away the liner. To do that, fastidiously undo the stitches alongside the liner and take away the material.
Hood Too Scorching
In case your hood is just too scorching, you can also make it extra snug by carrying a breathable cloth beneath. You too can strive opening up the hood a bit by folding again the perimeters.
Hood Too Chilly
In case your hood is just too chilly, you possibly can put on a shawl or hat beneath. You too can strive tucking the hood into your jacket.
Hood Not Matching Your Robe
In case your hood doesn’t match your robe, it isn’t an issue. Hoods are sometimes offered individually from robes, so it’s potential to combine and match colours and types.
Hood Not Matching Your Diploma
In case your hood doesn’t match your diploma, it’s possible you’ll have to buy a brand new one. Hoods are usually awarded for particular levels, so it is very important just remember to have the proper one.
Hood Storage and Care
If you find yourself not carrying your hood, it is very important retailer it correctly. Retailer your hood in a cool, dry place away from direct daylight. You too can wrap your hood in acid-free tissue paper to guard it from mud and moisture.
Caring For Your Hood
To make sure the longevity and great thing about your commencement hood, observe these care directions:
Cleansing |
Storage |
|---|---|
|
Dry cleansing is advisable for hoods fabricated from velvet or different delicate supplies. |
Retailer your hood in a cool, dry place away from direct daylight or warmth sources. |
8. Particular Issues
For hoods with particular gildings, akin to tassels or cords, take additional care to forestall harm:
– Tassels: Gently brush tassels to take away mud or grime. Keep away from pulling or snagging them.
– Cords: Cords must be tied loosely and saved fastidiously to forestall tangling or breakage.
– Ribbons: In case your hood has ribbons, guarantee they’re tied securely and saved flat to forestall creases.
– Velvet: Velvet hoods will be vulnerable to crushing. Retailer them fastidiously and keep away from putting heavy objects on prime of them.
– Embroidered Designs: Shield embroidered designs from extreme friction or contact with sharp objects.
Storing Your Hood Correctly
To make sure the longevity and preservation of your commencement hood, correct storage is important.
1. Clear and Dry the Hood: Earlier than storing, be certain that the hood is clear and fully dry to forestall mildew or mildew development.
2. Fold the Hood Neatly: Fold the hood in a approach that stops creasing or harm to the material. A standard technique entails folding it in half lengthwise, then rolling it up from the underside.
3. Place in a Breathable Container: Retailer the hood in a breathable container, akin to a material garment bag or acid-free storage field. Keep away from utilizing plastic baggage, as they lure moisture.
4. Preserve Away from Direct Daylight: Retailer the hood in a darkish, cool place away from direct daylight, which might fade the colours.
5. Deal with with Care: Keep away from dealing with the hood excessively, particularly by the velvet trim. Deal with it by the material solely.
6. Keep away from Excessive Temperatures: Retailer the hood in a temperature-controlled atmosphere. Excessive warmth or chilly can harm the material or gildings.
7. Stop Bugs: Preserve the hood away from bugs and pests by storing it in a sealed container or utilizing insect repellent.
8. Common Inspection: Periodically examine your hood for any indicators of harm or deterioration. Immediate consideration to any points will prolong its lifespan.
9. Archival Storage (Skilled)
| Materials | Description |
|---|---|
| Acid-free Paper | Used to wrap the hood and shield it from contact with acidic supplies. |
| Polyester Movie | Supplies an extra layer of safety towards moisture and mud. |
| Archival Field | Constructed from acid-free supplies and designed particularly for archival storage. |
| Local weather-Managed Storage Facility | Really useful for long-term storage to take care of optimum temperature and humidity ranges. |
Archival storage ensures the preservation of your hood for generations to return, defending it from the results of time and environmental elements.
Suggestions for Memorizing Hood Etiquette
Bear in mind these key factors to make sure you put on your hood appropriately at commencement:
1. Put on the Hood Inside Out
Through the ceremony, the inside lining of the hood must be seen, going through outward. The liner usually shows a vibrant shade and sample representing your college or subject of examine.
2. The Proper Shoulder Over the Left
Place the hood in your robe in order that the appropriate aspect of the hood’s lining rests over your left shoulder. Safe it with a hook or button on the neckline.
3. Tail Size
Alter the size of the tail to finish roughly at your fingertips when your arms are hanging by your aspect.
4. Coloration and Trim
Every shade and trim on the hood carries particular which means. Velvet trim signifies a doctoral diploma, whereas satin trim signifies a grasp’s diploma. The colours symbolize the college or program.
5. Hood Placement
Make sure the hood and tassel are centered on the again of your robe. Alter the place in order that the hood doesn’t slip off or turn out to be crooked.
6. Cap Placement
Put on the mortarboard cap squarely in your head, with the tassel on the appropriate. The tassel ought to cling down the center of your brow.
7. Doctoral Hood
Doctoral hoods function a rounded velvet trim and a pointed “tongue” that covers the appropriate hand. They’re worn with a doctorate robe.
8. Grasp’s Hood
Grasp’s hoods have a pointed satin trim and are worn with a grasp’s robe. They’re usually shorter than doctoral hoods.
9. Bachelor’s Hood
Bachelor’s hoods wouldn’t have any trim and are worn with a bachelor’s robe. They’re the shortest of all educational hoods.
10. Further Suggestions
- Apply carrying the hood and cap earlier than the ceremony.
- Research the colours and trims of your hood to grasp their symbolism.
- Make sure the hood is clear and pressed.
- Be aware of your posture and motion whereas carrying the hood.
- Benefit from the second and embrace the importance of the hood.
How To Put on Hood For Commencement
The commencement hood is a vital a part of the educational regalia worn at commencement ceremonies. It’s a image of the diploma that you’ve earned and the establishment from which you might have graduated. The hood is worn over the shoulders and is usually fabricated from velvet or silk. The colour of the hood varies relying on the diploma that you’ve earned. For instance, a bachelor’s diploma hood is usually black, whereas a grasp’s diploma hood is usually blue. The within of the hood is lined with a distinct shade of cloth, which represents the establishment from which you might have graduated. For instance, the within of a Harvard College hood is lined with crimson cloth.
When carrying the hood, it is very important ensure that it’s positioned appropriately. The hood must be positioned over the shoulders in order that the purpose of the hood falls on the heart of your again. The liner of the hood must be going through out in order that it’s seen. The hood must be worn with the tassel hanging down over the left shoulder. The tassel must be the identical shade because the hood.
The commencement hood is a major image of your educational achievement. You will need to put on it appropriately so as to present your satisfaction in your accomplishment.
Folks Additionally Ask About How To Put on Hood For Commencement
What’s the correct strategy to put on a commencement hood?
The hood must be positioned over the shoulders in order that the purpose of the hood falls on the heart of your again. The liner of the hood must be going through out in order that it’s seen. The hood must be worn with the tassel hanging down over the left shoulder. The tassel must be the identical shade because the hood.
What does the colour of the hood symbolize?
The colour of the hood varies relying on the diploma that you’ve earned. For instance, a bachelor’s diploma hood is usually black, whereas a grasp’s diploma hood is usually blue. The within of the hood is lined with a distinct shade of cloth, which represents the establishment from which you might have graduated.
What’s the tassel on the hood for?
The tassel on the hood is a logo of your educational achievement. It’s historically worn on the left shoulder. The tassel must be the identical shade because the hood.
