Whether or not you may have unintentionally hooked up the fallacious desk to your Lenovo laptop computer or should you merely wish to change it out for a brand new one, eradicating the desk is a comparatively simple process. The steps might fluctuate barely relying on the precise mannequin of Lenovo laptop computer you may have, however the common course of is identical. On this information, we are going to offer you detailed directions on how you can take away the desk out of your Lenovo laptop computer safely and effectively.
To start, be sure that your Lenovo laptop computer is turned off and disconnected from any energy supply. Subsequent, find the small screws which are securing the desk to the laptop computer. These screws are sometimes situated on the underside of the laptop computer, close to the hinge. After getting situated the screws, use a Phillips head screwdriver to take away them. Watch out to not overtighten the screws, as this might harm the laptop computer.
As soon as the screws have been eliminated, you possibly can gently raise the desk away from the laptop computer. Watch out to not pull too arduous, as you could possibly harm the laptop computer’s display or different elements. If the desk is caught, you should use a skinny object, equivalent to a bank card or a plastic spudger, to softly pry it free. As soon as the desk has been eliminated, you possibly can change it with a brand new one or just depart it off.
Establish the Lenovo Desk One
The Lenovo Desk One is a small, moveable desktop pc designed for fundamental computing duties. It’s sometimes utilized in residence workplaces, academic settings, and different environments the place area is restricted. The Desk One is characterised by its compact measurement, which measures roughly 6.7 inches by 6.7 inches by 1.2 inches. It additionally encompasses a modern and fashionable design with a matte black end.
Options of the Lenovo Desk One:
The Desk One presents a number of notable options, together with:
Processor:
The Desk One is powered by an Intel Celeron N5095 processor, which supplies enough efficiency for fundamental computing duties equivalent to internet shopping, electronic mail, and doc enhancing.
Reminiscence:
The system comes with 8GB of LPDDR4X reminiscence, offering ample multitasking capabilities and guaranteeing easy operation.
Storage:
It has a 256GB solid-state drive (SSD) for storage, providing quick boot occasions and fast entry to purposes and recordsdata.
Collect Essential Supplies
Earlier than you start, collect the mandatory instruments and supplies:
Instruments
- Phillips #2 screwdriver
- Flathead screwdriver
- Torx T15 screwdriver
- Plastic pry device (non-compulsory)
Supplies
- New desk one substitute
- Anti-static wrist strap (beneficial)
- Isopropyl alcohol
- Cotton swabs
Disconnecting Cables
After getting gathered the mandatory supplies, find the cables related to desk one. These cables might embrace:
| Cable Sort | Location |
|---|---|
| Energy | Again of desk one |
| Knowledge | Entrance of desk one |
| Audio (non-compulsory) | Entrance of desk one |
Disconnect all cables by gently pulling on the connectors. Deal with the cables with care to keep away from harm.
Disconnect Cables and Peripherals
Earlier than you start the disassembly course of, it is important to disconnect all cables and peripherals related to the Lenovo Desk One. This consists of energy cords, video cables, USB gadgets, and every other exterior gadgets.
Step-by-Step Information to Disconnecting Cables and Peripherals:
- Disconnect the cables. Disconnect all cables connecting the Desk One to the pc, together with the facility cable, USB cable, and every other cables.
- Take away the screws. Use a Phillips head screwdriver to take away the 4 screws that safe the Desk One to the desk.
- Elevate the Desk One off the desk. Rigorously raise the Desk One off the desk, being cautious to not harm the desk or the Desk One.
- Place the Desk One in a secure location. Place the Desk One in a secure location the place it won’t be broken.
- Take away the Desk One from the pc. To take away the Desk One from the pc, comply with these steps:
- Open the Gadget Supervisor.
- Within the Gadget Supervisor, broaden the "Common Serial Bus controllers" class.
- Proper-click on the "Lenovo Desk One" system and choose "Uninstall system".
- Within the affirmation dialog field, click on "OK" to uninstall the system.
- Find the 2 plastic tabs on the again of every bracket.
- Use a small screwdriver or your fingernail to push the tabs inward.
- Whereas holding the tabs inward, pull the bracket away from the faceplate.
- Repeat steps 1-3 for the opposite bracket.
- Find the 2 launch latches on the entrance of the tray.
- Press and maintain each launch latches concurrently.
- Pull the tray in the direction of you to take away it from the unit.
- To reinsert the tray, align the tray with the unit and slide it again into place till it clicks into place.
- A can of compressed air
- A smooth material
- A vacuum cleaner
- Align the entrance panel meeting with the system unit, guaranteeing that the I/O protect is correctly seated within the rear of the case.
- Use the screws offered to safe the entrance panel meeting to the chassis. Sometimes, there are two or 4 screws to tighten.
- Join the facility swap, reset swap, and HDD LED cables to their respective headers on the motherboard.
- Join the USB 3.0 header on the entrance panel meeting to the USB 3.0 header on the motherboard.
- Join the audio header on the entrance panel meeting to the audio header on the motherboard.
- Find the cables and peripherals that have been related to Desk One. These might embrace energy cables, information cables, and USB cables.
- Disconnect the cables and peripherals from Desk One.
- Join the cables and peripherals to the brand new Desk One.
- Energy on the brand new Desk One and confirm that the cables and peripherals are working correctly.
- Make it possible for the cables are correctly seated within the ports on each the Desk One and the peripherals.
- In case you are utilizing USB cables, be sure that they’re correctly seated within the USB ports on each the Desk One and the peripherals.
- In case you are utilizing energy cables, be sure that they’re correctly seated within the energy shops on each the Desk One and the peripherals.
- In case you are having bother connecting a cable or peripheral, discuss with the documentation that got here with the system.
- In case you are having bother connecting a cable or peripheral, attempt reseating it. This implies unplugging the cable or peripheral after which plugging it again in.
- In case you are nonetheless having bother connecting a cable or peripheral, attempt utilizing a distinct cable or port.
- In case you are nonetheless having bother, discuss with the documentation that got here with the system or contact Lenovo assist.
- Energy off the laptop computer.
- Disconnect all cables.
- Flip the laptop computer over.
- Find the 2 screws that safe the Desk One to the laptop computer.
- Use a Phillips-head screwdriver to take away the screws.
- Elevate the Desk One away from the laptop computer.
| Step | Motion |
|---|---|
| 1 | Find and disconnect the facility wire from the again of the pc. |
| 2 | Unplug any video cables (e.g., HDMI, DisplayPort) from the pc and monitor. |
| 3 | Take away all USB gadgets, together with keyboards, mice, exterior drives, and every other USB-connected peripherals. |
| 4 | Disconnect every other cables or peripherals, equivalent to audio cables, community cables, or printers. |
By following these steps, you make sure that all exterior connections are eliminated, permitting you to securely proceed with the disassembly of the Lenovo Desk One.
Take away Entrance Panel
Unplug all of the cables from the again of the pc. Open the entrance panel by urgent the latch situated on the prime of the panel. Rigorously take away the entrance panel and place it apart.
Drives
Eradicating Exhausting Drives
Find the arduous drives within the entrance of the pc. Take away the screws that safe the arduous drive in place. Rigorously slide the arduous drive out of its bay. Repeat this course of for any further arduous drives that have to be eliminated.
Eradicating Optical Drives
Find the optical drive within the entrance of the pc. Launch the drive utilizing the eject button or a paperclip inserted into the eject gap. As soon as the drive is ejected, rigorously pull it out of its bay. Repeat this course of for any further optical drives that have to be eliminated.
Eradicating Floppy Drives
Find the floppy drive within the entrance of the pc. Take away the screws that safe the drive in place. Slide the drive out of its bay. Repeat this course of for any further floppy drives that have to be eliminated.
Unmount the Desk One
To unmount the Desk One, comply with these steps:
Take away the Desk One Brackets
The Desk One brackets are the 2 plastic items that connect the desk to the faceplate. To take away them, comply with these steps:
Step-by-Step Information to Eradicating the Desk One Brackets
| Step | Motion |
|---|---|
| 1 | Find the 2 plastic tabs on the again of every bracket. |
| 2 | Use a small screwdriver or your fingernail to push the tabs inward. |
| 3 | Whereas holding the tabs inward, pull the bracket away from the faceplate. |
| 4 | Repeat steps 1-3 for the opposite bracket. |
Be aware: If the tabs are troublesome to push inward, you should use a pair of pliers or tweezers to grip the tabs and pull them out.
Take away the Desk One Tray
To take away the Desk One tray, comply with these steps:
Further Info
Listed here are some further particulars that could be useful when eradicating the Desk One tray:
* If the tray is caught, you might want to make use of a flat-head screwdriver or different skinny object to softly pry the discharge latches open.
* As soon as the tray is eliminated, you should have entry to the inner elements of the unit, together with the arduous drive, reminiscence, and different elements.
* Please deal with the tray with care to keep away from damaging the unit or its elements.
| Step | Motion |
|—|—|
| 1 | Find the 2 launch latches on the entrance of the tray. |
| 2 | Press and maintain each launch latches concurrently. |
| 3 | Pull the tray in the direction of you to take away it from the unit. |
| 4 | To reinsert the tray, align the tray with the unit and slide it again into place till it clicks into place. |
Clear the System Unit
The system unit is the principle a part of your pc and it accommodates the entire vital elements, such because the motherboard, CPU, and RAM. It is vital to maintain the system unit clear to stop mud and dust from build up and inflicting issues. Listed here are the steps on how you can clear the system unit:
1. Collect your supplies.
You’ll need just a few gadgets to scrub the system unit, together with:
2. Energy down the pc and unplug it from the facility outlet.
That is vital to stop any harm to the pc.
3. Open the case.
Most pc instances have aspect panels that may be eliminated by unscrewing just a few screws. As soon as the aspect panel is eliminated, you should have entry to the within of the system unit.
4. Take away the mud.
Use the can of compressed air to blow the mud off of the elements contained in the system unit. Remember to get into the entire nooks and crannies. You may also use a smooth material to wipe away any mud that’s left behind.
5. Vacuum the within of the system unit.
Use the vacuum cleaner to take away any remaining mud or dust from the within of the system unit. Watch out to not harm any of the elements.
6. Reinstall the aspect panel.
After getting cleaned the within of the system unit, reinstall the aspect panel and tighten the screws.
7. Plug the pc again in and energy it on.
Your pc ought to now be clear and freed from mud and dust.
8. Clear the followers.
The followers in your pc assist to maintain it cool. Over time, mud and dust can construct up on the followers, which may make them much less efficient. It is vital to scrub the followers commonly to make sure that your pc stays cool.
To wash the followers, use the can of compressed air to blow the mud off of them. You may also use a smooth material to wipe away any mud that’s left behind.
| Fan Location | Find out how to Clear |
|---|---|
| CPU fan | Use the can of compressed air to blow the mud off of the fan blades. Watch out to not contact the fan blades along with your fingers. |
| Case followers | Use the can of compressed air to blow the mud off of the fan blades. You may also use a smooth material to wipe away any mud that’s left behind. |
| Graphics card fan | Use the can of compressed air to blow the mud off of the fan blades. Watch out to not contact the fan blades along with your fingers. |
Reassemble the System Unit
9. Join the Entrance Panel Meeting
The next desk supplies a abstract of the entrance panel meeting connections:
| Connector | Motherboard Header |
|---|---|
| Energy Swap | PWRBTN |
| Reset Swap | RSTBTN |
| HDD LED | HDDLED |
| USB 3.0 | USB3.0 |
| Audio | AUD_F_HD |
Reconnect Cables and Peripherals
After getting eliminated Desk One from the Lenovo system, you will want to reconnect the cables and peripherals that have been beforehand related to it. Listed here are the steps to comply with:
Issues to Think about When Reconnecting Cables and Peripherals
Troubleshooting Reconnection Points
Find out how to Take away Desk One on Lenovo Laptops
To take away the Desk One accent from a Lenovo laptop computer, comply with these steps:
Folks Additionally Ask
What’s Desk One?
Desk One is an exterior keyboard and trackpad accent for Lenovo laptops.
How do I join Desk One to my Lenovo laptop computer?
Desk One connects to your Lenovo laptop computer through a USB cable.
Can I take advantage of Desk One with any Lenovo laptop computer?
Desk One is suitable with most Lenovo laptops which have a USB port.
