Binding is an important component within the ending means of any quilt, offering a cultured {and professional} contact to your creation. Whether or not you are a seasoned quilter or a novice, mastering the artwork of binding can elevate the sweetness and sturdiness of your quilt. Embark on this complete information to unravel the secrets and techniques of binding a quilt, making certain a flawless execution that may make your quilt a cherished masterpiece for years to come back. Dive into the world of materials, methods, and ideas as we discover the finer points of quilt binding, empowering you to create heirloom-quality quilts that may stand the take a look at of time.
Earlier than embarking on the binding course of, it is important to collect the mandatory supplies and put together your quilt. Choose a binding material that enhances the quilt’s colours and design, making certain a harmonious mix. The width of the binding needs to be applicable for the scale of the quilt, sometimes starting from 2 to 2.5 inches. After getting your supplies, machine-stitch the binding strips collectively to create a steady size. Then, miter the corners for a neat and exact end that may improve the general look of the quilt. Cautious preparation units the stage for a profitable binding course of, making certain a easy and rewarding expertise.
With the binding strips ready, it is time to connect them to the quilt. Start by inserting the binding over the uncooked edges of the quilt, aligning the uncooked edges of the binding with the uncooked edges of the quilt. Use a blind sew or a topstitch to securely connect the binding to the quilt. The blind sew methodology conceals the stitches throughout the fold of the binding, leading to a delicate and polished look. Alternatively, the topstitch methodology creates seen stitches that may add an ornamental component to the quilt’s design. The selection of sewing methodology in the end will depend on your private choice and the specified aesthetic in your quilt.
Supplies for Binding a Quilt
Earlier than you begin binding your quilt, it is important to collect the mandatory supplies. Here is a complete checklist to make sure you have every little thing you want:
Binding Cloth
- Amount: Sufficient material to create strips for binding all 4 sides of the quilt. Sometimes, 1/4 yard is ample for a small quilt, whereas bigger quilts could require 1/2 yard or extra.
- Width: 2 1/2 inches large for a completed binding width of 1/2 inch. In the event you want a wider binding, reduce the strips 3 inches or 3 1/2 inches large.
- Materials: Use a cotton mix or 100% cotton material for finest outcomes. Keep away from stretchy or slippery materials as they are going to be difficult to work with.
- Sample and Coloration: Select a material that enhances the quilt prime and backing. It may be a stable colour, a print, or a mixture of each.
Different Supplies
- Thread: Use an identical thread to the binding material.
- Needle: A pointy needle dimension 9 or 10 is beneficial.
- Measuring tape or ruler: For exact measurements.
- Iron and ironing board: To press the binding strips and seams.
- Rotary cutter and slicing mat: For correct slicing of binding strips.
- Bias tape maker: Optionally available, however it may well simplify the method of making bias binding.
Binding Methods
The selection of binding approach will depend on your choice and expertise stage. Listed below are three frequent strategies:
Machine Binding
* Appropriate for these with primary stitching machine abilities
* Fast and environment friendly methodology
* Creates a sturdy and safe binding
Hand Binding
* Extra time-consuming however provides a extra personalized effect
* Offers a standard and chic look
* Splendid for quilters who get pleasure from handwork
Bias Binding
* Bias-cut material stretches barely, making it good for curved edges
* Creates a easy and versatile binding
* Requires extra talent and endurance to execute
Getting ready the Quilt for Binding
Earlier than attaching binding to your quilt, it is essential to arrange the quilt correctly to make sure a safe {and professional} end. This includes a number of key steps:
Squaring the Quilt
To create a good, sq. border, it is important to sq. the quilt earlier than binding. This may be completed by measuring the quilt from nook to nook and adjusting the sides till all 4 sides are equal.
Trimming the Extra Batting and Backing
After squaring the quilt, trim any extra batting and backing that extends past the quilt prime. It will forestall cumbersome areas when folding the binding over the sting. Use a pointy rotary cutter and ruler to make sure clear, straight cuts.
Trimming Pointers:
| Quilt Thickness | Trim Allowance |
|---|---|
| 1/4 inch | 1/4 inch |
| 1/2 inch | 3/8 inch |
| 3/4 inch | 1/2 inch |
Observe: For thicker quilts, it could be essential to trim extra batting to stop binding from puckering.
Urgent the Quilt
Earlier than binding, press the quilt totally to flatten any seams and create a easy floor. Use a quilt iron or a sizzling steam iron on a low setting.
Slicing the Binding Strips
Slicing binding strips could seem to be a easy activity, however it’s essential for making certain your binding matches and lays flat. Observe these detailed steps to attain exact and professional-looking outcomes:
Step 1: Calculate Strip Width
Decide the width of your binding strips based mostly on the thickness of your quilt layers and the specified completed width of the binding. Sometimes, strips needs to be reduce between 2.5″ and three” large.
Step 2: Measure and Mark Strips
Measure the perimeter of your quilt prime and add just a few inches for overlapping and becoming a member of. Divide this whole size by the strip width to find out the variety of strips wanted. Mark equidistant strains parallel to the selvage fringe of your material to information your slicing.
Step 3: Slicing Choices
| Methodology | Appropriate Cloth Sorts | Benefits | Disadvantages |
|---|---|---|---|
|
Rotary Cutter and Ruler |
Most cotton, flannel, and batiks |
|
|
|
Bias Tape Maker |
Light-weight and skinny materials |
|
|
|
Scissors and Template |
Any material sort |
|
|
Select the slicing methodology that most closely fits your material sort and undertaking necessities. Constant strip width and correct slicing will guarantee a easy and seamless binding utility.
Becoming a member of the Binding Strips
After getting reduce your binding strips, it is advisable be part of them collectively to create one lengthy strip. There are just a few alternative ways to do that, however the most typical methodology is to make use of a diagonal seam. To do that, place the 2 strips proper sides collectively, aligning the uncooked edges. Sew a diagonal seam from one nook to the opposite, beginning about 1/2 inch from the sting. Trim the surplus material and press the seam open.
Methodology 1: Utilizing a Diagonal Seam
Step 1: Put together the Binding Strips
* Minimize the binding strips to the specified width and size.
* Trim the ends of the strips diagonally at a 45-degree angle, leaving a 1/2 inch overlap on all sides.
Step 2: Align and Sew the Strips
* Place the 2 strips proper sides collectively, aligning the uncooked edges and the diagonally reduce ends.
* Sew a diagonal seam alongside the aligned edges, beginning 1/2 inch from the nook.
Step 3: Trim and Press
* Trim the surplus material near the seam allowance.
* Press the seam open with an iron.
Methodology 2: Utilizing a Sq. Seam
Step 1: Put together the Binding Strips
* Minimize the binding strips to the specified width and size.
* Trim the ends of the strips perpendicularly to the grain line, leaving a 1/2 inch overlap on all sides.
Step 2: Align and Sew the Strips
* Place the 2 strips proper sides collectively, aligning the uncooked edges and the square-cut ends.
* Sew a straight seam alongside the aligned edges, beginning 1/2 inch from the nook.
Step 3: Trim and Press
* Trim the surplus material near the seam allowance.
* Press the seam open with an iron.
Repeat this course of till the entire binding strips are joined collectively. The whole size of the binding needs to be barely longer than the perimeter of the quilt, plus just a few additional inches for turning underneath on the corners.
Attaching the Binding to the Quilt Prime
After getting ready the binding, it is time to connect it to the quilt prime. Listed below are the steps concerned:
Step 1: Pin the Binding to the Quilt Prime
Align the uncooked fringe of the binding with the uncooked fringe of the quilt prime, proper sides collectively. Pin the binding in place throughout the quilt, taking care to make sure that the corners are mitered.
Step 2: Sew the Binding
Utilizing a small sew size (2.0-2.5 mm), sew the binding to the quilt prime alongside the pinned edge. Sew as near the sting as attainable with out catching the backing material.
Step 3: Trim the Extra Binding
As soon as the binding is stitched in place, trim the surplus binding to about 1/4 inch from the stitching line. It will create a clear and tidy edge.
Step 4: Fold the Binding to the Again
Fold the binding to the again of the quilt, mitering the corners as you go. Pin the binding in place throughout the quilt.
Step 5: Blind Sew the Binding
Utilizing a blind sew, sew the binding to the again of the quilt. This sew will conceal the stitching line and create a professional-looking end. To blind sew:
- Thread a needle with the identical thread you used to sew the binding to the quilt prime.
- Begin at one nook of the quilt and insert the needle by the again of the binding, about 1/4 inch from the sting.
- Deliver the needle up by the quilt prime, about 1/8 inch from the sting.
- Insert the needle again into the binding, about 1/4 inch from the earlier sew.
- Repeat steps 2-4 throughout the quilt.
As soon as the binding is blind stitched in place, your quilt is full!
Mitering the Corners
To miter the corners, fold the binding 45 levels throughout the nook of the quilt, as proven within the diagram under. Press the fold in place. Unfold the binding and fold it in the wrong way, once more at a 45-degree angle. Press the fold in place. You must now have a triangle of material on the nook of the quilt.
Fold the binding over the sting of the quilt, aligning the uncooked edges. Sew the binding in place, beginning and ending your stitches about 1/4 inch from the nook of the quilt. Trim the surplus binding from the nook.
Repeat steps 1-3 for the remaining corners of the quilt. As soon as the entire corners have been mitered, you may end stitching the binding across the fringe of the quilt.
| Step | Description |
|---|---|
| 1 | Fold the binding 45 levels throughout the nook of the quilt. |
| 2 | Press the fold in place. |
| 3 | Unfold the binding and fold it in the wrong way, once more at a 45-degree angle. |
| 4 | Press the fold in place. |
| 5 | Fold the binding over the sting of the quilt, aligning the uncooked edges. |
| 6 | Sew the binding in place, beginning and ending your stitches about 1/4 inch from the nook of the quilt. Trim the surplus binding from the nook. |
Hand-Stitching the Binding
Hand-stitching the binding is a comfortable and detailed methodology that permits for personalized outcomes. Here is a step-by-step information:
1. **Put together the Binding:** Fold the binding strip in half lengthwise, unsuitable sides collectively, and press it flat. Trim off any extra binding from the sides.
2. **Begin Stitching:** Thread a needle with the matching thread and safe the binding to the nook of the quilt, leaving a tail of about 3 inches. Deliver the needle up by the binding after which by the layer just under the quilt prime, about 1/4 inch from the sting.
3. **Proceed Stitching:** Insert the needle about 1/4 inch away from the sting alongside the aspect of the quilt. Deliver the needle up by the binding, then again down by the subsequent layer of the quilt. Repeat this course of alongside all the aspect of the quilt.
4. **Miter the Corners:** At every nook, miter the binding by folding the surplus binding again on the diagonal and stitching it right into a 45-degree angle. It will create a clear and sharp nook.
5. **Proceed Stitching:** After mitering the nook, proceed stitching down the subsequent aspect of the quilt, utilizing the identical approach as earlier than.
6. **Lap the Binding:** On the finish of the quilt, overlap the binding strip by about 1/2 inch and sew it down. It will create a safe end and stop the binding from fraying.
7. **End the Stitching:** Trim the surplus thread and tuck in any free ends. Hand-stitching the binding permits for larger management over the stitching and creates a ravishing, sturdy end.
Machine-Stitching the Binding
As soon as the binding is sewn to the quilt by hand, it is time to machine-stitch it to safe it completely. Here is an in depth information that can assist you with machine-stitching the binding:
1. Set Up Your Machine
Thread your stitching machine with an identical thread colour and use a common needle dimension 12 or 14. Set the sew size to 2.5-3 mm and choose a straight sew.
2. Fold the Binding over the Quilt Edge
Deliver the binding over the quilt edge and fold it over in order that it encloses the uncooked fringe of the material. Pin the binding alongside the quilt edge, spacing the pins about 2-3 inches aside.
3. Topstitch the Binding
Begin stitching alongside the folded fringe of the binding, catching the quilt layers as you go. Sew about 1/4 inch from the folded edge.
4. Fold the Binding to the Again
As soon as you’ve got stitched across the total quilt, fold the binding to the again of the quilt and pin it in place. The folded edge ought to lengthen about 1/4 inch previous the machine stitching.
5. Mitered Corners
While you come to a nook, fold the binding diagonally to kind a mitered nook. The diagonal fold ought to lengthen about 1/4 inch from the machine stitching on each side.
6. Binding Clip
You need to use a binding clip to make folding and mitering corners simpler. It helps hold the binding in place when you’re stitching.
7. Machine-Sew the Binding to the Again
Sew alongside the folded fringe of the binding to the again of the quilt. Sew about 1/4 inch from the folded edge.
8. Ending Touches
As soon as you’ve got stitched the binding across the total quilt, trim any extra binding and safe free threads. You’ll be able to hand-sew the corners if desired for a extra polished look.
Ending the Quilt Binding
Becoming a member of the Binding Ends
Trim the surplus binding material at a 45-degree angle, about 1/2 inch from the nook. Align the reduce edges of the binding and finger-press them flat. Machine-stitch the binding ends collectively securely, backstitching originally and finish of the seam.
Hand-Stitching the Binding to the Again
Fold the binding over the uncooked fringe of the quilt again and miter the corners. Use small whipstitches or blanket stitches to hand-sew the binding in place, being cautious to not sew by to the quilt prime. Start and finish every sew no less than 1/4 inch from the sting of the quilt.
9. Stitching the Binding to the Entrance of the Quilt
To create a standard hand-stitched look, use small blind stitches or catch stitches to stitch the binding to the entrance of the quilt. Insert the needle by the binding and quilt prime, catching solely a sew or two of the backing material. Repeat each 1/4 to 1/2 inch, holding the stitches even and the strain constant.
Alternatively, you may machine-stitch the binding to the entrance of the quilt utilizing a blind hem sew or zigzag sew. Set your machine to the narrowest width and a sew size of 1-1.5 mm. Information the quilt underneath the presser foot and stitch alongside the sting of the binding, catching solely a small portion of the quilt prime.
Tip: Use a thimble to guard your fingers whereas hand-stitching the binding.
Urgent the Quilt
As soon as the binding is sewn, press the quilt totally from the again and the entrance utilizing a heat iron and a urgent fabric. It will assist to flatten the seams and provides the quilt a completed look.
The best way to Connect Binding to a Quilt
Attaching quilt binding is an important step that completes the look of your quilt. Observe these detailed directions for a flawless end:
Suggestions for a Good Quilt Binding
1. Select the Proper Binding Cloth
Choose a material that enhances the quilt’s colours and design. Think about using a contrasting or coordinating material so as to add curiosity.
2. Minimize the Binding Strips
Minimize binding strips 2.5″ large (together with seam allowance) and the size required to encircle the quilt twice.
3. Be part of the Binding Strips
Use diagonal seams to seamlessly be part of the binding strips into one steady piece. Trim the surplus material and press the seam open.
4. Connect the Binding to the Quilt
Place the binding on the suitable aspect of the quilt, aligning the uncooked edges. Sew the binding 1/4″ from the sting, utilizing an ornamental or straight sew.
5. Fold the Binding Over
Fold the binding over to the again of the quilt and press. Topstitch the binding near the folded edge, making a channel for the hanging sleeve.
6. Create the Hanging Sleeve
Minimize a chunk of material 2.5″ large and twice the width of the quilt. Fold it in half lengthwise and insert it into the channel created by the binding.
7. Stitching the Hanging Sleeve
Sew the hanging sleeve in place by stitching 1/4″ from the sides. Trim the surplus material.
8. Mitered Corners
To create professional-looking mitered corners, fold the binding diagonally at a 45-degree angle and trim the surplus material. Connect the miters to the quilt utilizing a blind sew.
9. Safe the Binding
Hand-stitch the binding securely to the quilt, particularly within the corners and areas that obtain extra put on.
10. Ending Touches
Press the quilt to flatten the binding and take away any wrinkles. Optionally, you may add ornamental elaborations or embroider the binding for a personalized effect.
| Supplies Wanted: | ||||||
|---|---|---|---|---|---|---|
| Quilt | Binding material | Thread | Needle | Iron | Urgent fabric | Hanging sleeve material (elective) |
How To Connect Binding To A Quilt
Attaching binding to a quilt is an effective way to complete off your undertaking and provides it knowledgeable look. Listed below are the steps on how one can do it:
- Minimize your binding strips to the specified width. The width of the binding will rely on the scale of your quilt and the look you need to obtain. A superb rule of thumb is to chop the binding strips 2 1/2 inches large.
- Sew the binding strips collectively finish to finish, ensuring to miter the corners. To miter a nook, fold the 2 binding strips collectively at a 45-degree angle and stitch them collectively. Trim the surplus material.
- Connect the binding to the quilt by pinning it in place across the edge. Begin by pinning the binding to the middle of 1 aspect of the quilt. Then, work your means across the quilt, pinning the binding in place as you go. Make sure that to miter the corners as you go.
- Sew the binding to the quilt by hand or machine. In case you are stitching the binding by hand, use a blind sew. In case you are stitching the binding by machine, use a zigzag sew.
- Trim the surplus binding from the corners. As soon as the binding is sewn in place, trim the surplus material from the corners. Watch out to not trim an excessive amount of material, as this might trigger the binding to come back free.
Folks Additionally Ask
How do you connect quilt binding with out hand stitching?
You’ll be able to connect quilt binding with out hand stitching by utilizing a machine. To do that, use a zigzag sew to stitch the binding to the quilt. Make sure that to miter the corners as you go.
How do you connect quilt binding round curves?
To connect quilt binding round curves, you will have to make use of a curved needle. It will assist you to to stitch the binding across the curves with out puckering or gathering the material.
How do you miter quilt binding corners?
To miter quilt binding corners, fold the 2 binding strips collectively at a 45-degree angle and stitch them collectively. Trim the surplus material.
