Easy methods to Change the PUR Water Filter
Altering the water filter in your PUR water filtration system is a vital a part of guaranteeing that you just and your loved ones have entry to wash, wholesome consuming water. A clear water filter will take away impurities out of your water, comparable to chlorine, lead, and cysts. It can additionally enhance the style and scent of your water.
Supplies You may Want
- New PUR water filter
- Adjustable wrench
- Clear fabric
Step-by-Step Directions
- Find the water filter. The water filter is usually positioned beneath the sink, subsequent to the water provide line. It will likely be a cylindrical-shaped canister with a blue cap.
- Flip off the water provide. Earlier than you start engaged on the water filter, you will need to flip off the water provide to your sink. It will forestall water from leaking out while you take away the filter.
- Unscrew the previous filter. Use an adjustable wrench to loosen the previous filter. Watch out to not overtighten the wrench, as this might injury the filter or the housing.
- Take away the previous filter. As soon as the filter is loosened, you’ll be able to pull it straight all the way down to take away it from the housing.
- Insert the brand new filter. Take the brand new filter and insert it into the housing. Hand-tighten the filter till it’s cosy. Don’t overtighten the filter, as this might injury the filter or the housing.
- Activate the water provide. As soon as the brand new filter is in place, you’ll be able to activate the water provide to your sink. Enable the water to run for a couple of minutes to flush out any air bubbles from the system.
- Examine for leaks. As soon as the water has been working for a couple of minutes, verify for any leaks across the filter. For those who see any leaks, tighten the filter till the leak stops.
Ideas
- Change your PUR water filter each 6 months, or extra typically in case you have exhausting water.
- For those who discover a lower in water strain or a change within the style or scent of your water, it might be time to vary your filter.
- When you have any issue altering your PUR water filter, please seek the advice of the producer’s directions or contact a certified plumber.
Finding the Water Filter
Discovering the water filter in your PUR water filtration system is a vital step earlier than changing it. Here is a step-by-step information that can assist you find the filter effortlessly:
Establish the Filter Housing
Begin by figuring out the situation of the filter housing. It is sometimes a cylindrical or rectangular element linked to the underside of the sink or countertop. The housing could also be hid beneath an ornamental cowl or accessible by a small entry panel.
Find the Filter Sort
As soon as you have positioned the filter housing, decide the kind of filter you’ve. PUR gives numerous filter fashions, every with a novel design. Consult with your consumer guide or verify the filter housing itself for any markings that point out the filter sort.
Examine the Filter Housing
Fastidiously look at the filter housing for any seen indicators that may assist you find the filter. Some fashions might have a small entry door or a launch button that means that you can detach the filter simply. For those who do not see any apparent indicators, seek the advice of your consumer guide for particular directions.
Here is a desk that summarizes the important thing factors for finding the water filter:
| Step | Key Factors |
|---|---|
| 1 | Establish the situation of the filter housing. |
| 2 | Decide the kind of filter you’ve. |
| 3 | Examine the filter housing for seen indicators or seek the advice of the consumer guide for particular directions. |
Inspecting the O-Rings
Inspecting the O-rings is a vital step to make sure a leak-free connection when altering your PUR water filter. Observe these detailed directions to correctly examine the O-rings:
1. Find the O-rings:
- Take away the previous filter cartridge.
- Examine the within of the filter head for 2 O-rings.
2. Take away the O-rings:
- Use a small screwdriver or tweezers to softly take away the O-rings from their grooves.
- Watch out to not injury the O-rings throughout elimination.
3. Examine the O-rings for injury:
- Study the O-rings for any cuts, cracks, or tears.
- If any injury is discovered, the O-rings have to be changed earlier than putting in the brand new filter cartridge.
4. Clear and lubricate the O-rings:
- Wash the O-rings completely with heat soapy water and rinse nicely.
- Apply a small quantity of food-grade silicone grease to the O-rings, guaranteeing even distribution across the complete floor.
- Lubricating the O-rings will assist create a watertight seal and prolong their lifespan.
5. Reinstall the O-rings:
- Place the lubricated O-rings again into their grooves within the filter head.
- Ensure the O-rings are totally seated and never twisted.
Inspecting the O-rings correctly ensures a safe and leak-free connection, guaranteeing optimum efficiency of your PUR water filter.
Putting in the New Filter
After getting eliminated the previous filter, it is time to set up the brand new one. Listed here are the steps you want to observe:
1. Unpack the New Filter
Take away the brand new filter from its packaging and verify to ensure that it seems to be undamaged.
2. Lubricate the O-Rings
Apply a small quantity of food-grade lubricant to the O-rings on the brand new filter. It will assist to create a watertight seal.
3. Align the Filter with the Housing
Align the brand new filter with the housing and insert it into the opening. Be sure that the O-rings are seated correctly within the grooves.
4. Rotate the Filter Clockwise
Flip the filter clockwise till it’s hand-tight. Don’t overtighten the filter, as this might injury the housing.
5. Flush the Filter (Really helpful)
After putting in the brand new filter, it is suggested to flush it for a couple of minutes to take away any unfastened carbon particles. To do that, merely activate the chilly water faucet and let the water run by the filter for 3-5 minutes.
After getting flushed the filter, you’ll be able to take pleasure in clear, filtered water out of your PUR faucet.
Flushing the Filter
After putting in the brand new filter, it’s essential to flush it correctly to take away any carbon fines or activated carbon mud that will have collected throughout transportation or storage. Flushing the filter ensures that the water disbursed out of your PUR system is clear and freed from contaminants.
- Activate the chilly water faucet and let it run by the filter for five minutes.
- Fill a clear container with the flushed water and discard it.
- Repeat steps 1 and a couple of two extra instances for a complete of three flushes.
- New PUR water filter
- Wiping fabric
- Take away the previous filter by twisting it counterclockwise.
- Insert the brand new filter into the housing and twist it clockwise till it’s tight.
- Run water by the filter for five minutes to flush out any impurities.
After finishing the flushing course of, your PUR water filter shall be prepared to make use of. Keep in mind to flush the filter each 6 months or as really helpful by the producer’s directions to take care of its effectiveness and make sure the supply of fresh, wholesome consuming water.
Desk: Flushing Time Suggestions
| Filter Sort | Flushing Time |
|---|---|
| Faucet Mount Filters | 5 minutes |
| Countertop Filters | 10 minutes |
| Underneath Sink Filters | 1 gallon |
Testing for Leaks
As soon as the brand new filter is put in, it is important to check for leaks. Observe these steps to make sure a leak-free system:
1. Activate the water provide
Slowly activate the water provide valve to permit water to circulation by the filter.
2. Examine the connections
Examine the connections between the filter housing and the water strains for any leaks. Use a flashlight to verify for moisture or drips.
3. Examine the filter head
Study the filter head the place the filter cartridge screws into the housing. Search for any leaks or seeping water across the seal.
4. Examine the dispenser
Dispense some water from the tap or dispenser and verify for leaks on the spout or every other a part of the dispenser.
5. Wait 10 minutes
After working the water, wait about 10 minutes to permit the system to settle. This offers time for any potential leaks to change into obvious.
6. Examine the ground and counter tops
Examine across the filter, water strains, and dispenser for any puddles of water or moisture on the ground or counter tops. These might point out a leak.
7. Repeat the check
For those who discover any leaks, flip off the water provide and tighten the connections or change the defective half. Repeat the check once more till no leaks are detected.
8. Troubleshooting widespread leaks
For those who encounter any persistent leaks, this is a troubleshooting desk that can assist you establish and resolve the problem:
| Leak Location | Attainable Causes and Options |
|---|---|
| Filter housing connections | – Free connections: Tighten the connections utilizing a wrench or pliers. – Broken O-rings: Exchange the O-rings with new ones. |
| Filter head | – Free filter cartridge: Take away and reinstall the filter cartridge, guaranteeing it is correctly seated and tightened. |
| Dispenser spout | – Worn-out or broken washers: Exchange the washers within the dispenser spout. |
Sustaining the Filter
To make sure clear and wholesome water, it is essential to commonly keep your PUR water filter. Here is a step-by-step information on methods to do it:
1. Collect Supplies
Earlier than you start, collect the next supplies:
2. Flip Off the Water Provide
Find the water provide valve and switch it off. It will forestall water from flowing whilst you change the filter.
3. Take away the Previous Filter
Seize the previous filter and twist it counterclockwise to take away it from the mounting bracket.
4. Clear the Housing
Use a moist fabric to wipe down the within of the filter housing. Take away any particles or mineral buildup.
5. Insert the New Filter
Take away the brand new filter from its packaging and insert it into the clear housing. Twist the filter clockwise till it stops to safe it.
6. Flip On the Water Provide
Steadily activate the water provide valve.
7. Flush the Filter
Let the water run by the filter for about 5 minutes to flush out any remaining air or particles.
8. Examine for Leaks
Examine the filter and connections for any leaks. Tighten the filter if needed.
9. Reset the Filter Indicator
In case your PUR system has a filter indicator, press and maintain the reset button for just a few seconds to reset it.
10. Monitor the Filter Repeatedly
PUR filters usually final for six months or 100 gallons of filtered water. Monitor your filter’s utilization and change it when needed to make sure optimum efficiency and water high quality.
How To Change The Pur Water Filter
Altering the PUR water filter is a straightforward course of that may be accomplished in a couple of minutes. Listed here are the steps on methods to change the PUR water filter:
