Changing the freezer fan motor on a Whirlpool fridge might look like a frightening job, however with the proper instruments and steering, it is a manageable DIY restore. Whether or not your fridge is making extreme noise, not cooling correctly, or experiencing different points, a defective freezer fan motor might be the perpetrator. This complete information will stroll you thru the step-by-step means of changing the freezer fan motor in your Whirlpool fridge, making certain you restore optimum efficiency and save on pricey repairs.
Earlier than embarking on the alternative course of, it is essential to assemble the required instruments and supplies. You will want a screwdriver, a pair of pliers, a nut driver or wrench, a alternative freezer fan motor that’s appropriate along with your Whirlpool fridge mannequin, and a flashlight for illuminating dimly lit areas. Moreover, bear in mind to unplug the fridge from its energy supply earlier than beginning any work for security causes.
Upon getting every little thing you want, find the freezer fan motor contained in the freezer compartment. In most Whirlpool fridges, the freezer fan motor is located behind the rear panel of the freezer. To entry it, you may must take away the screws holding the panel in place and thoroughly carry it off. As soon as the rear panel is eliminated, you must see the freezer fan motor, which is often connected to the again wall of the freezer compartment. Disconnect {the electrical} connector from the fan motor and use pliers or a wrench to loosen and take away the mounting bolts. Then, carry out the outdated freezer fan motor and change it with the brand new one. Securely tighten the mounting bolts and reconnect {the electrical} connector. Lastly, reattach the rear panel and plug the fridge again into its energy supply.
Figuring out the Freezer Fan Motor
The freezer fan motor is answerable for circulating chilly air all through the freezer compartment. If the fan motor fails, the freezer won’t be able to keep up a chilly temperature and meals might spoil. There are a number of methods to determine the freezer fan motor:
- Find the freezer compartment. The freezer compartment is often situated on the high of the fridge.
- Open the freezer door. The freezer fan motor is often situated at the back of the freezer compartment.
- Search for a small, spherical motor with a fan blade connected to it. The freezer fan motor is often mounted on the again wall of the freezer compartment.
If you’re unable to find the freezer fan motor, you may seek the advice of the proprietor’s guide on your fridge. The proprietor’s guide will present particular directions on learn how to find the freezer fan motor.
Upon getting situated the freezer fan motor, you may test to see whether it is working correctly. To do that, merely unplug the fridge and take away the freezer fan motor. If the fan blade doesn’t spin freely, the freezer fan motor is probably going faulty and can have to be changed.
Here’s a desk summarizing the steps for figuring out the freezer fan motor:
| Step | Description |
|---|---|
| 1 | Find the freezer compartment. |
| 2 | Open the freezer door. |
| 3 | Search for a small, spherical motor with a fan blade connected to it. |
| 4 | If you’re unable to find the freezer fan motor, seek the advice of the proprietor’s guide on your fridge. |
Gathering the Needed Instruments and Supplies
To make sure a clean and profitable restore course of, it is essential to assemble all the required instruments and supplies earlier than you start. This is a complete record of what you may want:
Instruments:
• Screwdriver (Phillips and flathead)
• Wrench or socket set
• Pliers
• Gloves
• Security glasses
• Electrical tape
Supplies:
• Alternative freezer fan motor (appropriate along with your Whirlpool fridge mannequin)
• Wire connectors or crimp terminals
• Warmth shrink tubing or electrical tape
Detailed Information to Instruments:
| Device | Description |
|---|---|
| Screwdriver (Phillips and flathead) | For eradicating screws holding freezer panel, fan motor, and electrical connections |
| Wrench or socket set | For loosening or tightening bolts or nuts securing the freezer fan motor |
| Pliers | For gripping and reducing wires throughout electrical connections |
Disconnecting the Fridge
Security First
Earlier than starting any work, unplug the fridge. It is usually vital to show off the water provide to the ice maker, if relevant. If you’re not snug performing this job, please contact a professional equipment restore technician.
Shifting the Fridge
As soon as the fridge is unplugged, you will have to maneuver it away from the wall. Make sure you safe the doorways with tape or bungee cords to forestall them from swinging open. If you’re having issue transferring the fridge, you might must ask for help from a good friend or member of the family.
Accessing the Freezer Fan Motor
Find the freezer fan motor, which is often situated behind the again panel of the freezer compartment. To entry the fan motor, you will have to take away the screws that maintain the again panel in place. As soon as the again panel is eliminated, it is possible for you to to see the freezer fan motor.
Disconnect the wires from the freezer fan motor. Make sure you label the wires so to simply reconnect them later. As soon as the wires are disconnected, you may take away the freezer fan motor from the fridge.
When dealing with electrical parts, make sure you use warning and keep away from touching any uncovered wires. If you’re not snug performing this job, please contact a professional equipment restore technician.
| Instruments Wanted | Supplies Wanted |
|---|---|
| Phillips screwdriver | New freezer fan motor |
| Flathead screwdriver | Wire nuts (if obligatory) |
| Adjustable wrench | Electrical tape (if obligatory) |
Eradicating the Freezer Prime Panel
To take away the freezer high panel, you will have a Phillips head screwdriver. Start by unplugging the fridge from the ability outlet. Then, open the freezer door and take away the meals and cabinets. Subsequent, find the screws which might be holding the highest panel in place. There are usually two screws situated on the entrance of the panel and two screws situated behind the panel. Take away the screws and thoroughly carry the highest panel off the fridge.
Disconnecting the Electrical Wires
Upon getting eliminated the highest panel, you will have to disconnect {the electrical} wires which might be linked to the freezer fan motor. There are usually two wires, a black wire and a white wire, which might be linked to the motor. Use a pair of pliers to softly pull the wires off of the motor terminals. Watch out to not injury the wires.
Eradicating the Freezer Fan Motor
Now, you may take away the freezer fan motor. The motor is often held in place by two or three screws. Take away the screws and thoroughly carry the motor out of the fridge. Watch out to not injury the motor or the encompassing parts.
Putting in the New Freezer Fan Motor
To put in the brand new freezer fan motor, merely reverse the steps that you simply took to take away the outdated motor. First, insert the brand new motor into the fridge and safe it with the screws. Then, join {the electrical} wires to the motor terminals. Lastly, change the freezer high panel and safe it with the screws.
Upon getting put in the brand new freezer fan motor, plug the fridge again into the ability outlet and switch it on. The freezer fan motor ought to begin working and the freezer ought to start to chill down.
Detaching the Freezer Fan Meeting
Eradicating the freezer fan meeting requires a sequential process to make sure secure and efficient completion of the duty. This is an in depth information with extra steps to facilitate the method:
- Unplug the fridge: Earlier than performing any work, unplug the fridge to forestall any electrical hazards.
- Take away the freezer cabinets: Take out all of the cabinets and drawers contained in the freezer to supply higher entry to the fan meeting.
- Disconnect the ice maker: If the fridge has an ice maker, find it and disconnect it by unplugging the wires or turning off the water valve.
- Unscrew the fan meeting cowl: The fan meeting cowl is often connected with screws. Determine and take away these screws to entry the fan meeting.
- Unplug the fan motor: Find the fan motor and gently unplug its wire connector. Notice the place of the connector for simple reattachment later.
- Take away the mounting screws: The fan meeting is often secured by mounting screws. Find and take away these screws to detach the meeting.
- Carry the fan meeting out: Fastidiously carry the fan meeting out of the freezer compartment. It might require some light prying if it is caught.
Desk: Fan Meeting Mounting Screw Places
| Whirlpool Fridge Mannequin | Screw Places |
|---|---|
| WRT318FZDW00 | Prime and backside of meeting |
| WRF560SMHZ00 | Sides of meeting |
| WRF757SDHZ00 | Front and back of meeting |
Extra Suggestions:
- Take photos of the meeting and its connections earlier than disassembling for simpler reassembly.
- If the fan motor is seized or broken, it might require alternative fairly than reattachment.
- As soon as the fan meeting is indifferent, proceed with cleansing the compartment or changing some other parts as wanted.
Eradicating the 旧 Freezer Fan Motor
1. Unplug the fridge from the ability outlet.
2. Take away the freezer door by unscrewing the hinge screws. Carry the door straight as much as take away it.
3. Find the freezer fan motor. It’s often mounted on the again wall of the freezer compartment.
4. Disconnect {the electrical} wires from the fan motor. Notice the wire colours so to reconnect them accurately later.
5. Take away the mounting screws that maintain the fan motor in place.
6. Fastidiously take away the fan motor from the freezer compartment. Keep away from touching the fan blades, as they’re sharp.
| Instruments Wanted: | Supplies Wanted: |
|---|---|
| Screwdriver | Alternative freezer fan motor |
| Pliers | Electrical tape |
| Wire cutters |
Notice: If you’re not snug engaged on electrical home equipment, it’s best to name a professional equipment restore technician.
Putting in The New Freezer Fan Motor
7. Putting in the New Freezer Fan Motor
Now that the brand new freezer fan motor is in your possession, it’s time to set up it. Observe these steps rigorously:
- Find {the electrical} connector on the brand new freezer fan motor.
- Align {the electrical} connector on the brand new freezer fan motor with {the electrical} connector on the fridge.
- Push {the electrical} connector on the brand new freezer fan motor onto {the electrical} connector on the fridge till it clicks into place.
- Find the mounting bracket on the brand new freezer fan motor.
- Align the mounting bracket on the brand new freezer fan motor with the mounting bracket on the fridge.
- Insert the screws into the mounting bracket on the brand new freezer fan motor and tighten them till the fan motor is safe.
- Plug the fridge again into {the electrical} outlet.
- Activate the fridge and be sure that the brand new freezer fan motor is working correctly.
8. Troubleshooting
If the brand new freezer fan motor isn’t working correctly, there are some things you are able to do to troubleshoot the issue:
- Test {the electrical} connection between the brand new freezer fan motor and the fridge.
- Make it possible for the brand new freezer fan motor is securely mounted to the fridge.
- Contact a professional equipment restore technician for help.
- Phillips head screwdriver
- Adjustable wrench
- Socket wrench
- Flathead screwdriver
- Unplug the fridge earlier than beginning any work.
- Put on gloves and security glasses.
- Watch out to not minimize your self on any sharp edges.
- Plug the fridge again into the outlet.
- Activate the fridge.
- Test that the freezer fan is working.
- If the freezer fan isn’t working, test the next:
- The fan is correctly linked.
- The fan motor isn’t obstructed.
- The fridge is getting energy.
- If the freezer fan continues to be not working, you might want to exchange the fan motor.
- Unplug the fridge. Earlier than you start, make sure you unplug the fridge from the ability outlet. It will assist to forestall any electrical shock hazards.
- Find the freezer fan motor. The freezer fan motor is often situated behind the freezer compartment, behind the evaporator coils. To entry the motor, you may must take away the again panel of the freezer.
- Disconnect the wires from the motor. As soon as you’ve got situated the motor, disconnect the wires from the terminals. Make sure you word which wire goes to which terminal so to reconnect them accurately later.
- Take away the mounting screws. The motor is often held in place by a number of mounting screws. Take away these screws and thoroughly carry the motor out of the freezer compartment.
- Set up the brand new motor. Place the brand new motor within the freezer compartment and safe it with the mounting screws. Make sure you reconnect the wires to the terminals within the right order.
- Exchange the again panel of the freezer. As soon as the motor is put in, change the again panel of the freezer and plug the fridge again into the ability outlet.
- Ice buildup within the freezer compartment
- Heat temperatures within the freezer compartment
- Meals spoilage
Reattaching the Freezer Fan Meeting
8. Reattaching the freezer fan meeting requires a cautious method. Begin by inserting the fan motor into the fan housing, making certain it matches snugly. Safe the motor utilizing the screws supplied, tightening them firmly however not overtightening. Subsequent, reconnect the wiring harness to the fan motor by plugging it in securely. Test the connections to make sure they’re correctly aligned and locked in place. To stop any free connections, use electrical tape to insulate and safe the wires.
9. Mount the freezer fan meeting again into the fridge compartment by aligning it with the designated slots. Gently slide the meeting into place and safe it with the screws supplied. Make certain the fan is positioned accurately and that the blades usually are not obstructed. Make sure the meeting is securely mounted to forestall any vibrations or noise throughout operation.
10. Double-check all connections and guarantee every little thing is correctly secured. Examine the fan for any injury or free parts. Confirm that the fan blades spin freely once you manually rotate them. This step ensures the fan is working easily and can successfully flow into air throughout the freezer compartment.
Changing the Freezer Prime Panel
**1. Take away the ability wire.** Unplug the fridge from the ability outlet.
**2. Clear the freezer.** Take away all meals and ice from the freezer. It will make it simpler to maneuver the freezer high panel.
**3. Open the freezer door.** Pull the freezer door open till it stops.
**4. Tilt the freezer door upward.** Carry the freezer door up barely so to entry the freezer high panel screws.
**5. Take away the freezer high panel screws.** Use a screwdriver to take away the 2 screws that safe the freezer high panel.
**6. Carry the freezer high panel off.** Grip the freezer high panel on either side and carry it up and off the fridge.
**7. Find the freezer fan motor.** The freezer fan motor is situated at the back of the freezer compartment. It’s often connected to the freezer evaporator coils.
**8. Disconnect the freezer fan motor wires.** Use a pair of needle-nose pliers to disconnect the 2 wires which might be linked to the freezer fan motor.
**9. Take away the freezer fan motor mounting screws.** Use a screwdriver to take away the 4 screws that safe the freezer fan motor to the evaporator coils. **Notice:** The freezer fan motor is often held in place by 4 screws, however some fashions might have extra or fewer screws. Consult with your fridge’s proprietor’s guide for particular directions.
Instruments You will Want
Security Precautions
Reconnecting the Fridge
Upon getting changed the freezer fan motor, it is time to reconnect the fridge. To do that:
| Half quantity | Description |
|---|---|
| WR60X10071 | Freezer fan motor |
Upon getting verified that the freezer fan is working, you may shut the freezer door and luxuriate in your newly repaired fridge!
Tips on how to Exchange Freezer Fan Motor on Whirlpool Fridge
A defective freezer fan motor may cause a lot of issues along with your Whirlpool fridge, together with ice buildup, heat temperatures, and even meals spoilage. Should you’re experiencing any of those points, it is vital to test the freezer fan motor and change it if obligatory.
Changing the freezer fan motor on a Whirlpool fridge is a comparatively easy job that may be accomplished in about an hour. This is a step-by-step information that can assist you get began:
Folks Additionally Ask About Tips on how to Exchange Freezer Fan Motor on Whirlpool Fridge
How do I do know if my freezer fan motor is unhealthy?
There are a number of indicators that will point out that your freezer fan motor is unhealthy. These embrace:
How a lot does it value to exchange a freezer fan motor?
The price to exchange a freezer fan motor will fluctuate relying on the make and mannequin of your fridge. Nonetheless, you may anticipate to pay between $50 and $150 for the half and labor.
Can I change the freezer fan motor myself?
Sure, you may change the freezer fan motor your self for those who’re snug working with electrical home equipment. Nonetheless, for those who’re unsure learn how to do it, it is best to name a professional equipment restore technician.
