Draining your Intex pool is a vital upkeep process that ensures the longevity and cleanliness of your pool. Whether or not it is for the tip of the season, an intensive cleansing, or relocation, improper draining can result in injury and hassles. On this complete information, we’ll delve into the step-by-step technique of draining an Intex pool effectively and successfully. By following these detailed directions, you may guarantee a clean and trouble-free pool draining expertise.
Earlier than embarking on the draining course of, it is important to collect the mandatory instruments and supplies. You have to a submersible pump, a backyard hose, a bucket, and a chlorine neutralizer. The submersible pump is the guts of the operation, chargeable for effectively pumping out the water out of your pool. Select a pump with adequate energy to deal with the quantity of water in your pool and guarantee it has an extended sufficient wire to succeed in the closest energy outlet. The backyard hose will likely be used to direct the water away out of your pool and right into a drain or designated space. The bucket is useful for gathering any extra water or spills, whereas the chlorine neutralizer helps neutralize the chlorine within the pool water earlier than it is launched into the setting.
With the mandatory instruments in hand, you may proceed with the draining course of. Start by connecting the submersible pump to the backyard hose and putting the pump within the deepest a part of the pool. Make sure the hose is securely hooked up to each the pump and the drain or discharge level. Subsequent, add the suitable quantity of chlorine neutralizer to the pool water in response to the producer’s directions. This step is essential to stop the discharge of dangerous chlorine into the setting. As soon as the chlorine neutralizer is added, activate the pump and let it run till the water degree drops under the skimmer opening. At this level, you may disconnect the hose from the pump and manually take away any remaining water utilizing the bucket. Lastly, totally clear and retailer the pump and different gear for future use.
Collect Essential Instruments and Supplies
Draining an Intex pool is a comparatively easy course of, but it surely does require some preparation. Earlier than you start, collect the next instruments and supplies:
Backyard hose: A normal backyard hose is essentially the most handy strategy to drain an Intex pool. Make sure that it is lengthy sufficient to succeed in from the pool to a close-by drain or sewer. Don’t join on to a storm drain.
Pump: A submersible pump can pace up the draining course of, particularly in case you have a big pool. Search for a pump that is designed to be used with swimming pools and has a movement price of at the very least 1,500 gallons per hour.
Bucket: You will want a bucket to gather water because it drains from the pool. Select a bucket that is massive sufficient to carry a number of gallons of water.
Siphon: Whereas not obligatory, a siphon might help you take away water from the pool if you do not have a hose or pump. A siphon will be made utilizing a size of clear tubing. Use a size of twine or string to carry the siphon in place.
Pool cowl: In the event you plan to retailer your pool for the winter, you will have to cowl it to maintain it clear and stop injury. Select a pool cowl that is the appropriate measurement on your pool and is constituted of a sturdy materials.
| Instrument/Materials | Goal |
|---|---|
| Backyard hose | To empty water from the pool |
| Pump | To hurry up the draining course of |
| Bucket | To gather water because it drains from the pool |
| Siphon | To take away water from the pool and not using a hose or pump |
| Pool cowl | To maintain the pool clear and stop injury throughout storage |
Select a Drain Web site
Deciding on an applicable drain website is essential for the environment friendly drainage of your Intex pool. Think about the next components when making your selection:
Gravity: Select a location the place water will naturally movement away from the pool and into an acceptable drainage system or floor space. Keep away from draining into low-lying areas or close to property strains to stop flooding or injury to neighboring constructions.
Slope: A mild slope is right for draining your pool because it permits water to movement easily with out resistance. If the drain website is comparatively flat, take into account creating a short lived incline utilizing ramps or planks to facilitate drainage.
Distance from the pool: Choose a drain website that’s moderately near the pool to attenuate the size of the drainage hose you will want. Longer hoses improve friction and impede the movement of water.
Drainage capability: Make sure that the drain website can deal with the quantity of water discharged from the pool. If the drainage system is insufficient, water could accumulate and trigger flooding or drainage points.
Desk: Components to Think about When Selecting a Drain Web site
| Issue | Description |
|---|---|
| Gravity | Water ought to movement naturally away from the pool. |
| Slope | A mild slope aids in clean water movement. |
| Distance from the pool | Decrease the size of the drainage hose. |
| Drainage capability | Make sure the drainage system can deal with the pool’s quantity of water. |
Join the Drain Hose
1. Find the drain plug on the backside of the pool liner. It’s often a black or white plastic cap with a small gap within the heart.
2. Connect the tip of the drain hose to the drain plug. The hose ought to match snugly over the plug.
3. Lengthen the hose away from the pool and lead it to a drain or different appropriate location the place the water will be discharged. Make sure that the hose is lengthy sufficient to succeed in the specified location with out kinking or bending.
a. If the hose is simply too brief, you should purchase an extension hose from a pool provide retailer.
b. If the hose is simply too lengthy, you may coil the surplus hose up and safe it with bungee cords or zip ties.
4. Make sure that the hose is securely hooked up to each the drain plug and the drain or discharge location.
Place the Drain Hose Valve
The drain hose valve is a key element in draining your Intex pool. It controls the movement of water from the pool to the drain hose. To correctly place the drain hose valve, comply with these steps:
- Find the drain plug: The drain plug is usually situated on the underside or aspect of the pool, close to the underside rail.
- Take away the drain plug: Use a Phillips screwdriver or a coin to loosen the drain plug and take away it from the pool.
- Connect the drain hose: Join one finish of the drain hose to the drain plug. Safe the connection by tightening the hose clamp.
- Place the drain hose valve: The drain hose valve ought to be positioned in order that the tip of the hose is under the extent of the water within the pool. This can permit the water to movement out of the pool by means of the hose and into the specified drain location.
4. Place the drain hose valve (detailed information):
| Step | Directions |
|---|---|
| 1 | Decide the specified drain location. This might be a storm drain, a sewer system, or a backyard space. |
| 2 | Measure the gap from the pool to the drain location. This can decide the size of drain hose you want. |
| 3 | Place the drain hose in order that it slopes downwards from the pool to the drain location. This ensures that the water will movement out of the pool and into the drain by gravity. |
| 4 | Safe the drain hose in place utilizing hose clamps or different appropriate strategies to stop it from coming unfastened throughout draining. |
As soon as the drain hose valve is correctly positioned, you may start draining your Intex pool by opening the valve and permitting the water to movement out.
Draining an Intex Pool
Open the Valve and Drain the Pool
After you have gathered your instruments and ready the realm, it is time to open the valve and drain the pool. Find the drain valve on the aspect of the pool, often close to the underside. It’s going to have a small cap or plug that it’s essential take away. As soon as the cap is off, connect the drain hose to the valve and safe it tightly.
Open the valve by turning it counterclockwise. The water will begin to movement out of the pool and into the hose. If the water just isn’t draining quick sufficient, you should use a submersible pump to hurry up the method.
Monitor the water degree because it drains. As soon as the water degree is under the skimmer, you may flip off the pump and disconnect the hose.
Clear the Drain Valve
After the pool is drained, it is a good suggestion to wash the drain valve to stop clogs. Take away the cap and hose, and use a brush to wash any particles from the valve. You too can use a hose to flush out the valve.
Retailer the Pool and Equipment
As soon as the pool is drained, it is time to retailer it and the equipment for the winter. Clear the entire pool parts, together with the liner, filter, and pump. Dry the whole lot totally earlier than storing it in a cool, dry place.
| Instrument | Goal |
|---|---|
| Drain hose | Connects the drain valve to the discharge level |
| Submersible pump | Accelerates the draining course of |
| Brush | Cleans the drain valve |
Monitor the Draining Course of
After you will have related the pump to the pool and turned it on, you will need to monitor the draining course of to make sure that it’s working correctly. Listed below are some suggestions for monitoring the draining course of:
1. Test the water degree repeatedly. Because the pool drains, the water degree will step by step lower. You’ll be able to examine the water degree by wanting on the waterline on the aspect of the pool.
2. Hear for any uncommon noises. In the event you hear any uncommon noises, equivalent to a loud buzzing or rattling, it might be an indication that the pump just isn’t working correctly.
3. Test the pump for leaks. In the event you see any leaks, flip off the pump and tighten the connections.
4. Test the filter basket. The filter basket will acquire filth and particles because the pool drains. If the filter basket turns into full, it is going to limit the movement of water and decelerate the draining course of.
5. Clear the filter basket repeatedly. To scrub the filter basket, merely take away it from the pump and rinse it with water.
6. As soon as the pool is totally drained, flip off the pump and disconnect it from the pool. You’ll be able to then disassemble the pump and retailer it in a dry place for later use.
Troubleshooting Suggestions
If you’re having bother draining your Intex pool, listed here are some troubleshooting suggestions:
| Downside | Answer |
|---|---|
| The pump just isn’t working. | Test the facility wire to guarantee that it’s plugged in and that the facility change is turned on. Test the fuse or circuit breaker to guarantee that it has not blown. |
| The pump is making a loud noise. | The pump could also be clogged with filth or particles. Clear the filter basket and examine the impeller for any obstructions. |
| The pool just isn’t draining quick sufficient. | The filter basket could also be full. Clear the filter basket. The pump could also be too small for the dimensions of the pool. Get a bigger pump. |
Modify Hose Place as Wanted
As soon as the hose is related, guarantee it is correctly positioned to facilitate environment friendly drainage. Comply with these tips:
- Slope the hose: Hold the hose barely sloping downwards from the pool to the drain location. This prevents water from pooling within the hose and permits higher movement.
- Keep away from kinks and bends: Make sure that the hose would not have any sharp bends or kinks, as these can impede water movement. Hold it comparatively straight for optimum drainage.
- Loop the hose over the aspect: To create a more practical suction, loop the tip of the hose over the aspect of the pool (above the water degree) earlier than connecting it to the drain. This permits air to enter the hose, stopping siphoning and guaranteeing steady drainage.
- Use a hose weight (non-obligatory): If the hose tends to drift or transfer round, think about using a hose weight to maintain it submerged and in place.
Troubleshooting Hose Place
In the event you encounter difficulties throughout draining, examine the hose place and modify as follows:
| Downside | Answer |
|---|---|
| Water not draining or gradual drainage | Make sure the hose is correctly sloped, freed from kinks, and has a loop over the aspect of the pool. |
| Hose floating or shifting round | Use a hose weight to maintain it submerged and secure. |
| Air bubbles within the hose | Disconnect the hose from the pool and fill it with water to eradicate trapped air. |
Disconnect the Drain Hose
To disconnect the drain hose from the pool, comply with these steps:
- Find the drain plug on the backside of the pool.
- Unscrew the drain plug counterclockwise by hand or utilizing a wrench.
- As soon as the plug is unfastened, take away it and discard it.
- Join the tip of the drain hose to the drain plug.
Word: Make sure that the hose is lengthy sufficient to succeed in a drain or different desired location for the water to empty into. - Safe the drain hose by tightening the hose clamp across the connection utilizing a screwdriver or wrench.
- Pull out the surplus slack from the drain hose and prepare it in order that it would not kink or get in the best way.
- Place the tip of the drain hose over or into the specified location for the water to empty into, equivalent to a drain, bucket, or low-lying space.
- Open the drain valve on the pool by turning it counterclockwise.
Word: The water will begin draining from the pool.
| Security Suggestions: |
|---|
| – Make sure the drain hose is securely related to the pool and the specified drainage location. |
| – Watch out to not journey over the drain hose whereas it’s draining. |
| – Don’t go away the pool unattended whereas it’s draining. |
Clear and Retailer the Drain Gear
As soon as you have drained your Intex pool, it is necessary to wash and retailer the drain gear correctly to make sure its longevity. Here is how:
Disconnect the Drain Valve
Flip off the water provide to the pool and disconnect the hose from the drain valve.
Clear the Drain Valve
Examine the drain valve for any particles or algae. Use a delicate brush or material to wash it totally.
Clear the Drain Hose
Uncoil the drain hose and rinse it totally with clear water. Shake it vigorously to take away any remaining water.
Clear the Pump (if used)
In the event you used a pump to empty the pool, make certain to wash it totally in response to the producer’s directions.
Dry the Gear
Enable the entire drain gear, together with the valve, hose, and pump (if used), to dry utterly earlier than storing it.
Retailer the Gear
Retailer the clear and dry drain gear in a cool, dry place away from direct daylight.
| Part | Directions |
|---|---|
| Drain Valve | Retailer in a clear, dry location |
| Drain Hose | Coil tightly and retailer in a bag or container |
| Pump (if used) | Retailer in a protected location, following producer’s directions |
Supplies Wanted
Earlier than you start draining your Intex pool, be sure to have the next supplies readily available:
- Submersible pump (non-obligatory)
- Backyard hose
- Bucket or different container to gather water
- Pool chemical substances (non-obligatory)
Fill the Pool and Check
Earlier than draining your pool, it is necessary to fill it with recent water and take a look at the pH and chlorine ranges. This can assist to make sure that the water is secure for swimming and that the pool gear is functioning correctly.
10. Drain the Pool
After you have stuffed and examined the pool, you may start draining it. There are two methods to do that: utilizing a submersible pump or utilizing a backyard hose.
Utilizing a Submersible Pump:
- Place the pump within the deepest a part of the pool.
- Connect the backyard hose to the pump’s discharge port.
- Run the hose to a close-by drain or different disposal space.
- Activate the pump and permit it to run till the pool is empty.
Utilizing a Backyard Hose:
- Connect the backyard hose to the pool’s drain valve.
- Open the drain valve and permit the water to empty out.
- If the pool is massive, you could want to make use of a bucket or different container to gather the water.
- As soon as the pool is empty, shut the drain valve.
| Methodology | Execs | Cons |
|---|---|---|
| Submersible pump | Sooner Simpler Extra environment friendly |
Requires electrical energy Could be costly |
| Backyard hose | Cheaper Simpler to arrange |
Slower Much less environment friendly Could be extra labor-intensive |
Learn how to Drain an Intex Pool
You will need to drain your Intex pool correctly to stop injury to the pool and surrounding space. Comply with these steps to efficiently drain your pool:
1. Collect the mandatory supplies: a backyard hose, a pool pump, a bucket, and a chlorine pill.
2. Join the backyard hose to the pool pump and place the pump within the pool.
3. Add a chlorine pill to the pool water to kill any micro organism.
4. Activate the pool pump and let it run for a number of hours, or till the pool is empty.
5. As soon as the pool is empty, disconnect the backyard hose from the pool pump and take away the pump from the pool.
6. Use a bucket to scoop up any remaining water from the pool.
Individuals Additionally Ask
How typically ought to I drain my Intex pool?
You must drain your Intex pool each 2-3 months, or extra typically if the pool is closely used.
What’s one of the best ways to empty an Intex pool?
One of the simplest ways to empty an Intex pool is to make use of a pool pump. This can make the draining course of quicker and simpler.
Can I drain my Intex pool and not using a pump?
Sure, you may drain your Intex pool and not using a pump, however it is going to take longer and be tougher. You should utilize a bucket to scoop up the water, or you should use a siphon to empty the water.
