When coping with an underground fence system, there could come a time when you should disable one size of wire. This may be as a consequence of quite a lot of causes, equivalent to making repairs or increasing the system. Happily, the method of disabling a size of wire is comparatively easy and might be accomplished in a number of steps. Nevertheless, you will need to observe the directions fastidiously to keep away from damaging the system or inflicting any accidents.
First, you’ll need to find the transmitter to your underground fence system. The transmitter is usually situated in a central location, equivalent to within the basement or storage. After getting situated the transmitter, you’ll need to disconnect it from the facility supply. Subsequent, you’ll need to find the wire that you simply need to disable. The wire is usually buried underground, however it might be uncovered in some areas. After getting situated the wire, you’ll need to chop it. You’ll want to minimize the wire in a location that isn’t close to every other wires or underground utilities.
Figuring out the Transmit Wire
Step one in disabling one size of underground fence is to determine the transmit wire. That is the wire that carries the sign from the transmitter to the receiver. The transmit wire is usually buried underground, however it may be discovered by following these steps:
- Find the transmitter. The transmitter is normally situated within the basement or storage.
- Discover the wire that’s related to the transmitter’s “transmit” terminal. That is the transmit wire.
- Observe the transmit wire underground. The wire shall be buried about 6 inches deep. It might be crucial to make use of a metallic detector to find the wire.
Further Info
The transmit wire is usually a strong copper wire. It might be insulated with a black or purple jacket. The wire could also be bundled with different wires, such because the receiver wire or the facility wire.
The next desk gives some further details about the transmit wire:
| Attribute | Description |
|---|---|
| Shade | Black or purple |
| Insulation | Could also be insulated with a black or purple jacket |
| Measurement | Usually a strong copper wire |
| Location | Buried underground about 6 inches deep |
Testing the Fence Line
To disable a portion of your underground fence, you will must determine the situation the place the break within the wire happens. To do that, you should use a wire locator or observe these steps:
1. Energy off the System
Disconnect the transmitter from the facility supply and switch off the fence receiver in your pet’s collar.
2. Outline a Starting and Finish Level
Select two factors alongside the fence line that are functioning accurately as the start and finish factors of the disabled part.
3. Mark the Sign Width
Use a flag or stakes to mark the outer fringe of the energetic sign width at each the start and finish factors.
4. Take a look at the Fence Line
Ranging from the start level, stroll alongside the fence line whereas holding a compass or digital wire locator. As you strategy the break within the wire, the compass or locator will point out a weakening or lack of sign.
5. Pinpoint the Break
Proceed strolling alongside the fence line, fastidiously monitoring the compass or locator readings. The precise location of the break shall be indicated by a sudden drop in sign energy. You might must dig a shallow trench alongside the fence line to show the wire and visually examine it for breaks or injury.
Reburying the Wire Ends
After getting disconnected the wire, it is time to rebury the ends. It will forestall the wire from being uncovered to the weather and inflicting issues sooner or later.
To rebury the wire ends, observe these steps:
1. Dig a gap about 6 inches deep and 6 inches extensive.
2. Place the wire ends within the gap.
3. Cowl the wire ends with filth.
4. Tamp down the filth to safe the wire ends.
Ideas for Reburying the Wire Ends
* Use a shovel to dig the opening. Don’t use a pointy object, as this might injury the wire.
* Make certain the opening is deep sufficient to cowl the wire ends fully.
* Tamp down the filth firmly to safe the wire ends.
* In case you are burying the wire ends in an space the place there may be a number of site visitors, it’s possible you’ll need to place a marker over the opening to forestall individuals from stepping on it.
Making use of Waterproof Sealant
To make sure the longevity and effectiveness of your underground fence, it’s essential to use a water-proof sealant to the ends of the wire and any connections. It will defend the wire from corrosion and moisture injury, guaranteeing a dependable and long-lasting system.
For optimum outcomes, observe these detailed steps:
- Select the Proper Sealant: Choose a water-proof sealant particularly designed for electrical purposes, equivalent to silicone-based or polyurethane-based sealants.
- Put together the Wire: Clear the ends of the wire completely utilizing a wire brush or sandpaper to take away any filth or particles.
- Apply the Sealant: Apply a beneficiant layer of sealant to the uncovered ends of the wire, guaranteeing it covers your entire floor. Use a sealant gun or a brush to use the sealant evenly.
- Unfold the Sealant: Use a clear brush or your finger to unfold the sealant over the wire, guaranteeing it penetrates any gaps or crevices.
- Create a Clean End: Clean out the sealant utilizing a moist finger or a small brush. It will create a water-proof barrier that protects the wire.
- Lengthen the Sealant: For added safety, prolong the sealant alongside the wire by a number of inches, creating a water-proof sleeve.
- Permit it to Remedy: Permit the sealant to treatment fully in response to the producer’s directions. It will guarantee a powerful and sturdy bond.
By following these steps, you possibly can successfully apply a water-proof sealant to your underground fence wire, prolonging its lifespan and guaranteeing its reliability for years to come back.
Further Security Measures
1. Visible Indicators: Mark or Flag Disabled Areas
Clearly mark the perimeter of the disabled space with stakes, flags, or short-term boundaries. This visually alerts individuals and pets to the secure zone.
2. Indicators: Put up Warnings Close by
Place distinguished indicators close to the disabled space stating it’s “Fence Off” or “Perimeter Not Lively.” These warnings assist forestall unintentional entry.
3. Wi-fi Collars: Match on Pets
For pets with implanted receivers, use a wi-fi collar that overrides the digital sign. This permits them to soundly strategy the disabled space.
4. Supervision: Monitor Pets
When pets are within the neighborhood of the disabled space, hold them leashed or underneath shut supervision. This ensures they do not stray into the energetic zone.
5. Noise Limitations: Scale back Sound Transmission
Set up noise boundaries, equivalent to thick bushes or a low fence, across the disabled space to muffle the digital sign from the buried wire.
6. Managed Entry: Use Gates for Entry and Exit
Contemplate putting in gates at designated entry and exit factors to bodily forestall entry to the disabled space when not in use.
7. Communication: Inform Neighbors and Guests
Talk the situation and standing of the disabled space to neighbors, guests, and supply personnel to make sure their security.
8. Upkeep: Repeatedly Verify Disabled Space
Periodically test the disabled space for any indicators of sign bleed or injury to the wire. This ensures the perimeter stays inactive.
9. Further Concerns for Bigger Disabled Areas
For bigger disabled areas (over 200 ft in diameter):
- Use a better gauge wire (e.g., 18-gauge) to hold the digital sign.
- Double-check the sign distance utilizing a sign tester or receiver collar.
- Think about using a “zigzag” or “coil” sample when burying the wire within the disabled space to attenuate sign leakage.
- Create a “digital fence” utilizing a pet containment system that doesn’t require buried wire.
Easy methods to Disable One Size of Underground Fence
To disable one size of underground fence, observe these steps:
- Find the transmitter and disconnect it from the facility supply.
- Find the wire that runs from the transmitter to the disabled size of fence.
- Reduce the wire at some extent about 1 foot from the transmitter.
- Cap the minimize finish of the wire with a wire nut.
- Reconnect the transmitter to the facility supply.
The disabled size of fence will not be electrified.
