Fuel dryer valves are a important a part of the equipment’s operation. They open and shut to permit gasoline to movement to the burner, which heats the air that dries your garments. If the valve fails, the dryer won’t be able to warmth correctly. On this article, we are going to present you the way to check a gasoline valve coil on a dryer. This can be a easy course of that may be accomplished in a couple of minutes.
**Earlier than you start,** be sure that the dryer is disconnected from the facility provide. Additionally, you will want a multimeter, which is a tool used to measure electrical present. After getting gathered your supplies, comply with these steps:
1. **Find the gasoline valve.** It’s normally positioned on the again of the dryer, close to the burner.
2. **Disconnect the wires from the gasoline valve coil.** There are normally two wires, one black and one white.
3. **Set your multimeter to the ohms setting.**
4. **Contact the probes of the multimeter to the terminals of the gasoline valve coil.** The studying must be between 200 and 1000 ohms.
5. **If the studying shouldn’t be inside this vary,** the gasoline valve coil is flawed and must be changed.
Find out how to Check Fuel Valve Coils on a Dryer
In case your dryer shouldn’t be heating, one of many potential causes may very well be a defective gasoline valve coil. Testing the gasoline valve coils is a comparatively easy activity that may be carried out with a multimeter. Comply with these steps to check the gasoline valve coils in your dryer:
- Unplug the dryer from the facility outlet.
- Take away the entry panel to the dryer’s gasoline valve.
- Find the gasoline valve coils. There must be two coils, one for the principle burner and one for the pilot gentle.
- Disconnect the wires from the gasoline valve coils.
- Set your multimeter to the ohms setting.
- Contact one probe of the multimeter to every terminal on the gasoline valve coil. The multimeter ought to learn between 100 and 200 ohms.
- If the multimeter reads 0 ohms, the gasoline valve coil is shorted and must be changed.
- If the multimeter reads infinity, the gasoline valve coil is open and must be changed.
Folks Additionally Ask
What are the signs of a defective gasoline valve coil?
The signs of a defective gasoline valve coil can embody:
- The dryer not heating
- The pilot gentle not staying lit
- The dryer making a clicking noise
- The dryer overheating
How do I substitute a gasoline valve coil?
To exchange a gasoline valve coil, comply with these steps:
- Shut off the gasoline provide to the dryer.
- Unplug the dryer from the facility outlet.
- Take away the entry panel to the dryer’s gasoline valve.
- Find the gasoline valve coils. There must be two coils, one for the principle burner and one for the pilot gentle.
- Disconnect the wires from the gasoline valve coils.
- Take away the mounting screws that maintain the gasoline valve coils in place.
- Set up the brand new gasoline valve coils.
- Reconnect the wires to the gasoline valve coils.
- Reinstall the entry panel to the dryer’s gasoline valve.
- Activate the gasoline provide to the dryer.
- Plug the dryer again into the facility outlet.
How a lot does it value to interchange a gasoline valve coil?
The fee to interchange a gasoline valve coil will range relying on the make and mannequin of your dryer. Nonetheless, you’ll be able to anticipate to pay between $50 and $150 for the half and labor.
