Reaper 7 introduces a strong new characteristic referred to as Comping Takes Play Chosen Take. This revolutionary device lets you rapidly and simply audition and choose the very best takes from a number of recordings, saving you numerous hours of tedious enhancing. With Comping Takes Play Chosen Take, you’ll be able to effortlessly create flawless performances by combining the very best elements of every take right into a single, cohesive monitor.
Comping Takes Play Chosen Take is extremely user-friendly. Merely choose the takes you wish to audition and press the “Comp Takes” button. Reaper will routinely play every soak up sequence, permitting you to listen to how they sound collectively. You may then use the “Play Chosen Take” button to immediately hear solely the chosen take. This seamless workflow makes it simple to experiment with totally different mixtures of takes till you discover the proper association.
Along with its highly effective comping capabilities, Comping Takes Play Chosen Take gives superior choices for customizing your workflow. You may alter the playback velocity and quantity of every take, create customized fade-ins and fade-outs, and even crossfade between takes. This stage of management offers you the flexibleness to create complicated and nuanced performances that convey your music to life. Whether or not you are a seasoned producer or simply beginning out, Comping Takes Play Chosen Take is an important device that may revolutionize your recording course of. So what are you ready for? Expertise the facility of comping immediately and take your music to the following stage.
Finding the Comping Takes Panel
To entry the Comping Takes Panel in Reaper 7, observe these detailed steps:
- Find the Monitor Management Panel (TCP): Click on on the TCP button positioned on the top-right nook of the principle Reaper window.
- Allow the Comping Takes Button: Inside the TCP, search for a small button labeled “Comping Takes.” Whether it is disabled, click on on it to allow it.
- Entry the Comping Takes Panel: As soon as the button is enabled, a brand new panel will seem beneath the TCP, titled “Comping Takes.” That is the Comping Takes Panel, the place you’ll be able to handle and work along with your comped takes.
Further Suggestions:
- Keyboard Shortcut: You may also entry the Comping Takes Panel utilizing the keyboard shortcut “Ctrl/Cmd + Alt + C.”
- Customizable Workflow: The Comping Takes Panel will be custom-made to suit your workflow. Proper-click on the panel and choose “Customise Comping Takes Panel” to switch its format and performance.
Inputting A number of Takes
To enter a number of takes, observe these steps:
- Choose the takes you wish to comp collectively. You may choose a number of takes by clicking on them whereas holding down the Ctrl key.
- Proper-click on one of many chosen takes and choose “Comp Takes.” The next dialog field will seem:
- Output: Choose whether or not you wish to create a brand new monitor for the comped take or add it to an present monitor.
- Take Order: Choose the order through which the takes will probably be comped. “As recorded” will comp the takes within the order they had been recorded, whereas “As listed” will comp them within the order they’re listed within the Take Browser.
- Fade Tail: Choose whether or not or to not fade out the tail of the earlier take when the following take is performed. This will help to clean out the transitions between takes.
- Crossfade Size: Enter the size of the crossfade between takes. This will help to create a smoother transition between takes.
- Click on OK to comp the takes. The comped take will probably be positioned within the undertaking timeline.
| Output | Take Order | Fade Tail | Crossfade Size |
|---|---|---|---|
Choosing the Desired Take
Upon getting recorded a number of takes, you’ll be able to choose the specified take to make use of in your undertaking. To do that, observe these steps:
- Click on on the “Take” menu within the Reaper toolbar.
- Choose the “Comping Takes” choice.
- Within the “Comping Takes” window, you will notice a listing of all of the takes that you’ve got recorded. To pick out a take, click on on the “Choose” button subsequent to the take.
- Upon getting chosen a take, you’ll be able to click on on the “Play Chosen Take” button to listen to the take.
- To make the chosen take the default take, click on on the “Make Chosen Take Default” button.
| Take | The identify of the take. |
| Size | The size of the soak up beats. |
| Begin | The beginning time of the soak up beats. |
| Finish | The top time of the soak up beats. |
| Notes | Any notes that you’ve got made concerning the take. |
Enjoying the Chosen Take
As soon as a take has been chosen, there are a number of methods to play it.
Keyboard Shortcuts
You should use the next keyboard shortcuts to play the chosen take:
| Shortcut | Motion |
|---|---|
| Enter | Play the chosen take from the cursor place |
| Shift+Enter | Play the chosen take from the start |
| Alt+Enter | Play the chosen soak up loop mode |
Transport Controls
You may also play the chosen take utilizing the transport controls within the toolbar.
To play the chosen take from the cursor place, click on the Play button.
To play the chosen take from the start, click on the Rewind button after which click on the Play button.
To play the chosen soak up loop mode, click on the Loop button after which click on the Play button.
Increasing the Take Lanes
Reaper 7 gives the power to broaden the take lanes, offering you with extra flexibility when working with a number of takes. To broaden the take lanes:
- Proper-click on the take lane you wish to broaden.
- Choose “Increase Take Lanes”.
- The take lanes will probably be expanded to the left and proper.
You may also use the next keyboard shortcuts to broaden the take lanes:
| Shortcut | Motion |
|---|---|
| Ctrl+Alt+Up Arrow | Increase the take lanes above the chosen take |
| Ctrl+Alt+Down Arrow | Increase the take lanes beneath the chosen take |
| Ctrl+Alt+Left Arrow | Increase the take lanes to the left of the chosen monitor |
| Ctrl+Alt+Proper Arrow | Increase the take lanes to the proper of the chosen monitor |
Increasing the take lanes will be helpful for a wide range of causes, equivalent to:
- Viewing extra takes without delay
- Making it simpler to pick and examine takes
- Creating house for extra takes
- Organizing your takes in a extra logical manner
- Bettering the general workflow when working with a number of takes
Adjusting the Take Size
As soon as you have chosen the takes you wish to comp, you’ll be able to alter their size to fine-tune the ultimate outcome.
To regulate the size of a take, choose it within the Take Browser or the Monitor. Then, seize the sting of the take and drag it to the specified size. You may also use the “Trim” device within the Monitor menu.
When adjusting the take size, there are some things to bear in mind:
- The size of the take have to be inside the vary of the unique recording. You may’t prolong a take past its authentic finish level, however you’ll be able to trim it to any level inside its length.
- The size of the take will have an effect on its pitch and velocity. In the event you trim a take, its pitch will improve, and its velocity will lower. Conversely, if you happen to prolong a take, its pitch will lower, and its velocity will improve.
- The size of the take will be adjusted to match the size of one other take. That is helpful for creating seamless transitions between takes.
| Take Size | Pitch | Pace |
|---|---|---|
| Longer | Decrease | Slower |
| Shorter | Increased | Sooner |
Trimming Takes
To trim the chosen take, go to the Take menu and choose “Trim Take”. Alternatively, you should utilize the keyboard shortcut “Alt + T” (Home windows) or “Choice + T” (Mac).
Within the “Trim Take” dialog, you’ll be able to specify the brand new begin and finish factors for the take. You may also use the mouse to tug the perimeters of the take to trim it.
Superior Trimming
| Motion | Keyboard Shortcut |
|---|---|
| Trim to the left of the cursor | Ctrl + Shift + [ (Windows) / Cmd + Shift + [ (Mac) |
| Trim to the right of the cursor | Ctrl + Shift + ] (Home windows) / Cmd + Shift + ] (Mac) |
| Trim to the beginning of the choice | Ctrl + Shift + Residence (Home windows) / Cmd + Shift + Residence (Mac) |
| Trim to the tip of the choice | Ctrl + Shift + Finish (Home windows) / Cmd + Shift + Finish (Mac) |
These shortcuts let you rapidly trim takes with out having to open the “Trim Take” dialog.
Deleting Takes
To delete takes, right-click on the take and choose “Delete”. You may also choose a number of takes and delete them suddenly. To do that, maintain down the Shift key and click on on the takes you wish to delete. Then, right-click and choose “Delete”.
If you wish to delete the entire takes in a monitor, you are able to do this by choosing the monitor and urgent the “Delete” key. This can delete the entire takes within the monitor, together with the chosen take.
You may also delete takes through the use of the “Delete Take” command within the “Edit” menu. To do that, choose the take you wish to delete and go to the “Edit” menu. Then, choose “Delete Take”.
Once you delete a take, it’s moved to the Recycle Bin. You may get well deleted takes from the Recycle Bin by going to the “File” menu and choosing “Get better Deleted Takes”.
Normalizing Takes
In Reaper, normalizing takes entails adjusting them to a constant quantity stage to make comparability and enhancing simpler. Comply with these steps:
- Choose the takes you wish to normalize.
- Proper-click and choose “Take Actions” > “Normalize Takes.”
- Within the “Normalize Takes” window, specify the goal normalization stage (in dB) or choose “Set to Max Quantity.”
- Select an interpolation mode to clean out any abrupt quantity adjustments.
- Allow “Clip Shield” to forestall the normalized takes from clipping.
- Click on “OK” to use the normalization.
Desk of Normalization Choices
| Choice | Description |
|---|---|
| Normalize to Peak | Adjusts the takes so their loudest level is on the specified goal stage. |
| Normalize to RMS | Adjusts the takes to have the identical common loudness. |
| Set to Max Quantity | Boosts the takes to the utmost potential stage with out clipping. |
Saving and Renaming the Comp
Now that you’ve got created a comp, it can save you it for later use. To do that, right-click the comp within the Take Lanes panel and choose “Save Comp”. You can be prompted to enter a reputation for the comp. Upon getting entered a reputation, click on “Save”.
You may rename a comp at any time by right-clicking the comp within the Take Lanes panel and choosing “Rename Comp”. Enter the brand new identify for the comp and click on “OK”.
You may also create a brand new comp from a choice of takes. To do that, choose the takes you wish to embody within the comp and right-click. Choose “Create Comp from Choice”.
Upon getting created a comp, you’ll be able to preview it by clicking the “Preview” button within the Take Lanes panel. The chosen take will probably be performed again.
To pick out a take from the comp, click on on the take within the Take Lanes panel. The chosen take will probably be highlighted in blue.
You may play the chosen take by clicking the “Play” button within the Take Lanes panel.
You may also delete a comp by right-clicking the comp within the Take Lanes panel and choosing “Delete Comp”.
Here’s a desk summarizing the steps for saving and renaming a comp:
| Step | Motion |
|---|---|
| 1 | Proper-click the comp within the Take Lanes panel. |
| 2 | Click on “Save Comp”. |
| 3 | Enter a reputation for the comp. |
| 4 | Click on “Save”. |
| 5 | Proper-click the comp within the Take Lanes panel. |
| 6 | Click on “Rename Comp”. |
| 7 | Enter the brand new identify for the comp. |
| 8 | Click on “OK”. |
| 9 | Choose the takes you wish to embody within the comp. |
| 10 | Proper-click. |
| 11 | Click on “Create Comp from Choice”. |
| 12 | Click on the “Preview” button within the Take Lanes panel. |
| 13 | Click on on the take within the Take Lanes panel. |
| 14 | Click on the “Play” button within the Take Lanes panel. |
| 15 | Proper-click the comp within the Take Lanes panel. |
| 16 | Click on “Delete Comp”. |
Reaper 7 Comping Takes Play Chosen Take How To
Reaper 7 offers an intuitive and environment friendly strategy to comp takes, permitting you to rapidly and simply create the proper efficiency from a number of recorded takes.
To play the chosen soak up Reaper 7, observe these steps:
- File a number of takes of the identical monitor.
- Open the Take Browser by clicking the “Takes” button within the monitor header.
- Choose the take you wish to play from the Take Browser.
- Click on the “Play Chosen Take” button within the Take Browser.
The chosen take will now be performed again. You may press the spacebar or click on the “Cease” button to cease playback.
Individuals Additionally Ask About Reaper 7 Comping Takes Play Chosen Take How To
How do I create a comp in Reaper 7?
To create a comp in Reaper 7, observe these steps:
- Choose the takes you wish to embody within the comp.
- Proper-click and choose “Comp Chosen Takes” from the menu.
- The brand new comp will probably be created and added to the monitor.
How do I edit a comp in Reaper 7?
To edit a comp in Reaper 7, open the Take Browser and choose the comp you wish to edit. You may then use the Take Editor to regulate the timing and quantity of the person takes within the comp.
How do I delete a comp in Reaper 7?
To delete a comp in Reaper 7, choose the comp within the Take Browser and press the “Delete” key. The comp will probably be faraway from the monitor.
