When the times get longer and the nights get hotter, there’s nothing fairly like taking a dip in your pool. However what occurs when your pool mild goes out? Don’t be concerned, altering out a pool mild is a comparatively simple process that you are able to do your self. On this article, we’ll stroll you thru the steps on the way to change out a pool mild, so you will get again to having fun with your pool very quickly.
Earlier than you begin, it is essential to collect all the needed supplies. You may want a brand new pool mild, a screwdriver, a pair of pliers, and a wire stripper. After getting your whole supplies, you may start the method of fixing out the pool mild. First, you will want to show off the facility to the pool. Subsequent, you will must take away the previous pool mild. To do that, merely unscrew the screws which can be holding the sunshine in place. As soon as the screws are eliminated, you may pull the sunshine out of the pool. Now, you are prepared to put in the brand new pool mild.
To put in the brand new pool mild, merely reverse the steps that you just used to take away the previous mild. First, insert the brand new mild into the pool. Subsequent, screw within the screws which can be holding the sunshine in place. Lastly, activate the facility to the pool and check the brand new mild. If the sunshine is working correctly, then you definitely’re all set! Now you can take pleasure in your pool once more with a brand new, working pool mild.
Instruments and Supplies Required
Security Gear
Earlier than trying any pool mild alternative, guarantee your security by donning the next protecting gear:
- Non-slip sneakers or sandals for safe footing across the pool space
- Gloves to guard your arms from sharp edges or electrical parts
- Security glasses to safeguard your eyes from splashing water or particles
Instruments
Collect the required instruments for the job, together with:
- Phillips head screwdriver: Used to take away the sunshine fixture’s screws
- Flat head screwdriver: For disconnecting electrical wires
- Electrical tape: To insulate and safe electrical connections
- Wire cutters: To trim extra wire if needed
- Pool mild elimination device (non-compulsory): Specifically designed to help in eradicating the sunshine fixture from the housing
Supplies
Purchase the next supplies:
- New pool mild: Guarantee it’s suitable together with your pool’s measurement and voltage
- Gasket or O-ring: Creates a watertight seal between the sunshine fixture and the housing
- Pool mild sealant: Waterproof adhesive for securing the sunshine fixture in place
Find the Underwater Mild
Step one in altering out a pool mild is to find it underwater. To do that, merely stroll across the fringe of your pool and search for a small, spherical or sq. plate on the aspect of the pool.
After getting discovered the plate, take away it by unscrewing the screws which can be holding it in place.
Behind the plate, you will note the pool mild. It will likely be linked to the pool’s electrical system by a wire.
Figuring out the Sort of Pool Mild
There are two fundamental sorts of pool lights: incandescent and LED.
Incandescent pool lights use a conventional incandescent bulb to provide mild. They’re much less energy-efficient than LED lights, however they’re additionally cheaper.
LED pool lights use light-emitting diodes (LEDs) to provide mild. They’re extra energy-efficient than incandescent lights, however they’re additionally costlier.
To find out the kind of pool mild you’ve gotten, merely have a look at the bulb. If it’s a conventional incandescent bulb, then you’ve gotten an incandescent pool mild. Whether it is an LED bulb, then you’ve gotten an LED pool mild.
| Pool Mild Sort | Bulb Sort |
|---|---|
| Incandescent | Conventional incandescent bulb |
| LED | LED bulb |
Set up the New Bulb
1. Flip off the facility on the breaker field. This is a crucial security precaution to take earlier than starting any electrical work.
2. Take away the previous bulb. To do that, you have to to unscrew the retaining ring that holds the bulb in place.
3. Examine the socket. Make it possible for the socket is clear and freed from any corrosion. If there’s any corrosion, you may clear it with a wire brush or sandpaper.
4. Insert the brand new bulb. Watch out to not contact the glass of the bulb together with your naked arms, as this may trigger the bulb to burn out prematurely.
5. Screw on the retaining ring. Tighten the ring till it’s comfortable, however don’t overtighten it.
6. Activate the facility on the breaker field. Make it possible for the sunshine is working correctly earlier than you get again within the pool.
7. Troubleshooting ideas.
| Drawback | Answer |
|---|---|
| The sunshine doesn’t activate. | – Make it possible for the facility is turned on on the breaker field. – Test the bulb to guarantee that it isn’t burned out. – Examine the socket to guarantee that it’s clear and freed from any corrosion. |
| The sunshine sparkles. | – Tighten the retaining ring. – Test the bulb to guarantee that it isn’t unfastened. – Examine the socket to guarantee that it’s clear and freed from any corrosion. |
| The sunshine is dim. | – Clear the bulb and the socket. – Test the voltage on the breaker field to guarantee that it’s throughout the beneficial vary. – Change the bulb with a brighter one. |
Check the Mild
Earlier than eradicating your pool mild, unplug the sunshine from the facility supply. If the previous mild continues to be linked to {the electrical} system, it ought to now be utterly darkish and now not illuminating the pool. If the sunshine nonetheless comes on, contact knowledgeable electrician earlier than continuing.
Flip off all energy to the pool at your private home’s electrical panel by shutting off the circuit breaker that powers the pool gear. The precise circuit breaker for the pool could also be labeled “pool pump” or “pool gear.” In case you are not sure which circuit breaker to show off, seek the advice of with an electrician.
Take away the sunshine lens from the housing. Some lights have a quarter-turn lock, whereas others could have a screw that must be eliminated to take the housing off.
After eradicating the lens, you will note the sunshine bulb. Examine the bulb for any indicators of harm, equivalent to cracks or unfastened filaments. If the bulb is broken, it should be changed earlier than reassembling the sunshine.
If the bulb seems to be in good situation, it’s nonetheless a good suggestion to test it with a multimeter to make sure it’s working correctly. To do that, set the multimeter to the ohms setting and contact the probes to the 2 terminals on the bulb. If the multimeter reads “0” or “OL,” the bulb is blown and needs to be replaced. If the multimeter reads a resistance value, the bulb is working properly.
Once you have confirmed that the bulb is working properly, reassemble the light in the reverse order of disassembly.
How to Change Out a Pool Light
Your pool light is an important part of your pool, providing both safety and illumination. If your pool light is not working, it is important to change it out as soon as possible. Here are the steps on how to change out a pool light:
- Turn off the power to the pool light at the circuit breaker.
- Remove the screws that hold the light fixture in place.
- Carefully pull the light fixture out of the pool.
- Disconnect the wires from the light fixture.
- Connect the wires to the new light fixture.
- Slide the new light fixture into the pool.
- Secure the light fixture in place with the screws.
- Turn on the power to the pool light at the circuit breaker.
Once you have changed out the pool light, test it to make sure it is working properly. If the light is not working, there may be a problem with the wiring. In this case, you should call an electrician.
People Also Ask About How to Change Out a Pool Light
Why is my pool light not working?
There are a few reasons why your pool light may not be working. The most common reason is that the bulb has burned out. Other possible reasons include a problem with the wiring, the switch, or the timer. If you are not sure why your pool light is not working, it is best to call an electrician.
How do I remove the screws that hold the light fixture in place?
The screws that hold the light fixture in place are usually located on the back of the light fixture. You will need to use a screwdriver to remove the screws. If the screws are rusted or corroded, you may need to use a penetrating oil to loosen them.
How do I connect the wires to the new light fixture?
The wires to the new light fixture are usually color-coded. The black wire is the hot wire, the white wire is the neutral wire, and the green or bare wire is the ground wire. Connect the black wire to the black wire on the light fixture, the white wire to the white wire on the light fixture, and the green or bare wire to the green or bare wire on the light fixture.
How do I test the new pool light?
Once you have installed the new pool light, turn on the power to the light at the circuit breaker. If the light is working properly, it will turn on. If the light is not working, there may be a problem with the wiring. In this case, you should call an electrician.
