There are quite a few methods to finish a quilt, and understanding learn how to machine bind a quilt is a worthwhile ability for any quilter. Machine binding is an environment friendly technique to safe the layers of your quilt collectively whereas including an ornamental contact. Better of all, it’s a easy method that may be simply mastered with somewhat observe. On this complete information, we are going to offer you step-by-step directions, useful ideas, and insightful methods to make sure a profitable machine binding expertise.
The great thing about machine binding lies in its versatility. Whether or not you like a standard straight sew, a blanket sew, or an ornamental sew, you’ll be able to simply customise the binding to match your quilt’s fashion. It is usually a time-saving method in comparison with hand binding, permitting you to finish your quilt extra rapidly and effectively. Furthermore, machine binding gives a sturdy and safe end that can stand the take a look at of time, making certain that your quilt stays a cherished heirloom for generations to come back.
Earlier than embarking on the machine binding course of, nonetheless, it’s essential to make sure that the quilt is correctly ready. The sides needs to be trimmed evenly, and the quilt high, batting, and backing needs to be securely layered and basted collectively. This can create a steady basis for the binding and stop puckering or distortion. As soon as the quilt is correctly ready, you’ll be able to proceed with the machine binding course of, following the detailed directions within the subsequent sections of this information. By adhering to the strategies and ideas outlined on this article, you’ll uncover that machine binding is a rewarding and pleasing option to full your quilt, including knowledgeable contact and defending your handiwork for years to come back.
Deciding on the Proper Material
When selecting the proper material on your quilt binding, hold the next concerns in thoughts:
**Weight and Sturdiness:** The material needs to be light-weight and straightforward to deal with, but sturdy sufficient to resist the damage and tear of use. Think about materials like cotton, cotton blends, or light- to medium-weight canvas.
**Shade and Sample:** The binding ought to complement the quilt’s total design. Select a material that coordinates with the quilt’s colours and patterns, or go for a contrasting coloration to create a extra hanging impact.
**Drape and End:** The material ought to drape properly across the quilt’s edges with out showing cumbersome or stiff. Smooth, drapey materials like silk, voile, or light-weight linen can create a fragile, elegant end.
**Matching and Grading:** Guarantee the material has sufficient width to chop the binding strips with out piecing. Think about the quilt’s measurement and the specified binding width to find out the required material yardage.
**This is a desk summarizing the important thing material concerns:**
| Material Attribute | Concerns |
|---|---|
| Weight and Sturdiness | Light-weight, sturdy (e.g., cotton, cotton blends, canvas) |
| Shade and Sample | Enhances or contrasts the quilt’s design |
| Drape and End | Smooth, drapey (e.g., silk, voile, linen) |
| Matching and Grading | Sufficient width to chop binding strips with out piecing |
Making ready the Batting
The selection of batting can have a major influence on the general really feel, heat, and drape of your quilt. When deciding on batting, think about elements similar to fiber content material, thickness, and loft. Experiment with differing kinds to search out the one which most closely fits your required consequence.
To make sure the batting is even, easy, and freed from wrinkles, comply with these steps:
1. Lay Out the Batting
Unfold the batting flat on a big floor. Make sure the selvage edges of the batting align with the sides of the backing material.
2. Press the Batting
Use a heat iron and a urgent material to softly press the batting. This can take away any wrinkles and assist it lie flat. Take care to not over-press, as it will probably flatten the loft of the batting.
| Batting Fiber Content material | Traits |
|---|---|
| Cotton | Pure, breathable, sturdy; gives good insulation |
| Polyester | Artificial, hypoallergenic, machine-washable; retains loft nicely |
| Wool | Pure, heat, moisture-wicking; could be costly |
| Bamboo | Sustainable, breathable, anti-bacterial; just like cotton in really feel |
| Tencel | Pure, mushy, absorbent; good different to silk or cotton |
Layering and Pinning the Quilt
As soon as the quilt high and backing are full, it is time to layer and pin them collectively. This step ensures that the layers are aligned and keep in place throughout quilting.
Layering the Quilt
Place the quilt high on a flat floor, proper facet up. Middle the quilt backing on high of the quilt high, proper facet down.
Pinning the Quilt
Utilizing sharp pins, pin the layers collectively across the edges, ranging from the middle and dealing your manner outward. Insert the pins perpendicular to the quilt, making certain they undergo all three layers.
Pinning Method:
| Pinning Fashion | Description |
|---|---|
| Vertical | Pins are inserted perpendicular to the quilt, making a straight line. |
| Diagonal | Pins are inserted at a diagonal angle, making a safe maintain. |
| Crosswise | Pins are inserted in a cross form, offering extra stability. |
Pin Placement:
- Area pins roughly 2-3 inches aside.
- Pin across the perimeter of the quilt, in addition to in any areas the place there are sharp angles or curves.
- Keep away from pinning by any elaborations or ornamental components.
Guaranteeing the layers are correctly pinned will assist stop shifting and puckering throughout quilting.
Selecting the Machine Sew
Deciding on the suitable machine sew for binding your quilt is essential. Think about the next elements:
Thread Depend and Weight
Select a thread depend that matches the material weight of your quilt. A better thread depend gives higher sturdiness for heavier materials.
Sew Size
Modify the sew size to the scale of your quilt and the specified binding width. An extended sew size creates a extra informal look, whereas a shorter sew size affords higher precision.
Sew Sample
There are numerous sew patterns appropriate for machine binding. This is a desk summarizing the commonest choices:
| Sew Sample | Description |
|---|---|
| Straight Sew | A easy and safe sew that’s simple to manage. |
| Zigzag Sew | Supplies additional energy and suppleness, stopping the binding from unraveling. |
| Blind Hem Sew | Create an invisible end by concealing the sew line on the entrance of the quilt. |
Needle Sort
Use a pointy needle designed for quilting. Think about a denim or leather-based needle for thicker materials to stop needle breakage.
Setting the Machine Rigidity
Guaranteeing correct machine rigidity is essential for optimum binding outcomes. This is a step-by-step information to setting the strain:
1. Thread the Machine
Thread your stitching machine with the thread you may use for binding. Wind a bobbin with the identical thread.
2. Set the Rigidity Dial
Find the strain dial in your stitching machine. For quilting initiatives, a rigidity setting of 4-5 is usually really useful.
3. Create Check Stitches
Sew a number of take a look at stitches on a scrap material. The stitches ought to neither be too unfastened nor too tight.
– If the stitches are too unfastened, enhance the strain by turning the dial clockwise.
– If the stitches are too tight, lower the strain by turning the dial counterclockwise.
4. Check the Binding
As soon as the take a look at stitches look good, connect the binding to a quilt sandwich. Sew a brief part and verify the strain. If the binding is puckering or pulling, modify the strain accordingly.
5. Nice-Tuning the Rigidity
To attain essentially the most exact rigidity, think about the next elements:
| Material Sort | Rigidity Setting |
|---|---|
| Quilting Cotton | 4-5 |
| Flannel or Minky | 3-4 |
| Silk or Satin | 2-3 |
| Heavyweight Canvas | 5-6 |
Keep in mind that these are pointers, and you might want to regulate the strain barely based mostly in your particular material and machine.
Binding the Quilt
Step 1: Fold the Binding in Half
Align the uncooked edges of the binding and fold it in half lengthwise, with the unsuitable sides collectively. Iron the crease to safe the fold.
Step 2: Pin the Binding to the Quilt
Beginning on the heart of 1 edge, pin the folded binding to the sting of the quilt, proper sides collectively. The uncooked fringe of the binding needs to be aligned with the uncooked fringe of the quilt.
Step 3: Sew the Binding
Utilizing a 1/4-inch seam allowance, sew alongside the folded fringe of the binding, catching each the binding and the quilt.
Step 4: Fold the Binding Over and Pin
After you have sewn across the quilt, fold the binding over the uncooked fringe of the quilt and pin it in place alongside the again.
Step 5: Sew the Binding to the Again
Utilizing a 1/8-inch seam allowance, sew across the quilt as soon as extra to safe the binding to the again. Begin and cease a number of inches from the place you started to depart a niche for turning.
Step 6: Flip and Topstitch the Binding
To attain a clear {and professional} end, flip the quilt proper facet out by the hole you left. Tuck the uncooked edges of the binding inside and pin them in place. Utilizing a straight sew, topstitch across the whole quilt, catching each the binding and the quilt. This can safe the binding and provides it a elegant look.
| Binding Width | Completed Width |
|---|---|
| 2 1/4 inches | 1/2 inch |
| 3 inches | 1 inch |
| 3 1/2 inches | 1 1/2 inches |
Ending the Binding
7. Mitering the Corners
For a professional-looking end, miter the corners of the binding earlier than stitching it down. This is a step-by-step information:
– Measure and mark 1 1/2 inches from the nook on each edges of the binding.
– Fold the binding in half on the mark and crease.
– Deliver the 2 uncooked edges of the binding collectively to kind a 45-degree angle.
– Fold the opposite finish of the binding over the mitered nook and match the uncooked edges.
– Press the nook flat and safe it with Marvel Clips or pins to maintain it in place.
Tip: For simpler mitering, use a miter ruler or a mitering device particularly designed to information you in slicing and folding the binding.
– Repeat this course of for the remaining three corners.
| Nook | Steps |
|---|---|
| 1 | Measure and mark 1 1/2 inches from the nook on each edges of the binding. |
| 2 | Fold the binding in half on the mark and crease. |
| 3 | Deliver the 2 uncooked edges of the binding collectively to kind a 45-degree angle. |
| 4 | Fold the opposite finish of the binding over the mitered nook and match the uncooked edges. |
| 5 | Press the nook flat and safe it with Marvel Clips or pins. |
Machine Binding Suggestions
Utilizing a Binding Foot
A binding foot makes it simple to stitch binding in your quilt. It has a small information that helps you retain the binding straight and even.
Selecting the Proper Needle
Use a pointy needle that’s the proper measurement on your material. A too-small needle will trigger the material to pucker, whereas a too-large needle will create holes.
Stitching Size
Use a sew size of two.5 to three.0 mm. This can create a powerful, safe sew that won’t come undone.
Urgent
Press the binding as you sew it to assist it lay flat. Urgent will even assist to stop the binding from puckering.
Mitering Corners
Once you come to a nook, you’ll need to miter the binding. This implies folding the binding at a 45-degree angle and stitching it down. Listed below are step-by-step directions on learn how to miter a nook:
- Fold the binding in half at a 45-degree angle, with the folded edge going through the quilt.
- Sew the binding down, beginning on the nook and stitching to the sting of the quilt.
- Fold the binding over the sting of the quilt and stitch it down, beginning on the nook and stitching to the sting of the quilt.
- Trim the surplus binding on the nook.
Including a Hanging Sleeve
If you wish to add a dangling sleeve to your quilt, you are able to do so earlier than you bind it. Listed below are step-by-step directions on learn how to add a dangling sleeve:
- Lower two items of material which are 4 inches large and the size of your quilt.
- Fold every bit of material in half lengthwise and press.
- Open up one piece of material and lay it on high of the quilt, with the uncooked edges aligned with the highest fringe of the quilt.
- Fold the opposite piece of material over the primary piece and press.
- Sew across the edges of the hanging sleeve, leaving a small opening for turning.
- Flip the hanging sleeve proper facet out and press.
- Topstitch across the edges of the hanging sleeve.
Ending the Binding
After you have sewn the binding across the whole quilt, you’ll need to complete it. Listed below are step-by-step directions on learn how to end the binding:
| Step | Directions |
|---|---|
| 1 | Fold the binding over the sting of the quilt and stitch it down, beginning on the nook and stitching to the sting of the quilt. |
| 2 | Trim the surplus binding on the nook. |
| 3 | Repeat steps 1 and a couple of for the remaining three corners. |
| 4 | Press the binding. |
| 5 | Topstitch across the edges of the binding. |
Troubleshooting Widespread Issues
Needle Breaking
Use a pointy needle particularly designed for quilting. Make sure the needle is inserted accurately and is the suitable measurement for the material and thread. Think about using a bigger needle measurement or a heavier thread weight.
puckering
Guarantee the material is taught as you sew. Modify the strain settings in your machine, growing the highest thread rigidity or reducing the bobbin rigidity. Use a strolling foot or a sew with a better sew density, similar to a straight sew or a zigzag sew.
Rigidity Issues
Modify the highest thread rigidity or bobbin rigidity to create even stitches. If the highest thread is simply too unfastened, tighten the highest rigidity; if the bobbin thread is simply too unfastened, tighten the bobbin rigidity.
Binding Not Flat
Make sure the binding is evenly distributed across the quilt edge. Modify the strain or sew size to stop the binding from puckering or gathering. Think about using a double-fold binding method for a safer and even end.
Uneven Stitching
Test the needle and rigidity settings. Ensure the needle is sharp and the strain is appropriate. Use a strolling foot or a sew with a better sew density to stop skipping stitches.
Material Fraying
Use a pointy needle and high-quality thread designed for quilting. Modify the sew size or rigidity to stop the material from fraying. Think about using a backing material or interfacing to strengthen the quilt edge.
Binding Not Stays Safe
Make sure the binding is folded over the uncooked fringe of the quilt by at the least 1/4 inch and stitched securely. Think about using machine quilting strategies, similar to mitered corners or machine binding, for a sturdy {and professional} end.
Quilt Not Sq.
Measure the quilt fastidiously earlier than binding and trim any uneven edges. Use a quilting sq. or ruler to make sure the binding is evenly distributed across the quilt.
Binding Tucks In
Enhance the sew size or modify the strain to stop the binding from tucking in. Think about using a strolling foot or a sew with a better sew density to make sure safe stitching.
Machine Quilting: A Information to Binding Your Masterpiece
As soon as you have accomplished the quilting course of, the ultimate step is to bind the quilt, giving it knowledgeable end and a contact of non-public fashion.
Supplies You may Want:
- Binding material
- Backing material
- Thread
- Measuring tape
- Rotary cutter or scissors
- Stitching machine
- Iron and ironing board
Step-by-Step Directions:
1.
Put together the Binding Strips
Lower strips of binding material which are 2.5 inches large. The size of the strips will rely on the scale of your quilt.
2.
Sew the Binding Strips Collectively
Sew the binding strips collectively end-to-end, utilizing a diagonal seam allowance for a seamless look.
3.
Connect the Binding to the Quilt
Fold the binding strip in half and pin it to the sting of the quilt, aligning the uncooked edges. Sew alongside the folded fringe of the binding.
4.
Trim the Extra Binding
Trim any extra binding from the corners of the quilt.
5.
Fold the Binding to the Again
Fold the binding over to the again of the quilt and pin it in place.
6.
Sew the Binding to the Again
Sew alongside the folded fringe of the binding, securing it to the again of the quilt.
7.
Miter the Corners
To create a neat and tidy end on the corners, miter the binding by folding it diagonally and stitching it in place.
8.
Safe the Binding
Hand-stitch or machine-stitch the ends of the binding collectively to safe it.
9.
Press the Quilt
Press the quilt to flatten the binding and provides it knowledgeable look.
Get pleasure from Your Masterpiece
Congratulations! You have efficiently sure your quilt utilizing a machine. Now you’ll be able to benefit from the magnificence and luxury of your handmade masterpiece for years to come back.
The best way to Bind a Quilt by Machine
Binding a quilt by machine is an important ending step that secures the sides and provides a elegant contact to your undertaking. This is a step-by-step information that will help you obtain a professional-looking bind:
- Put together the Quilt: Trim any extra batting or material across the edges of the quilt to make sure a clear and even end.
- Create the Binding Strips: Lower bias strips of material measuring 2 1/2 inches large. The size of every strip will differ relying on the scale of your quilt. Be part of the strips collectively utilizing a diagonal seam to make a steady binding.
- Connect the Binding: Pin the binding across the edges of the quilt, aligning the uncooked fringe of the binding with the uncooked fringe of the quilt high. Machine sew across the quilt, near the fold of the binding, utilizing a slim zigzag sew or a straight sew with a small sew size.
- Miter the Corners: To create a neat end on the corners, fold the binding diagonally at a 45-degree angle and trim the surplus. Align the folded fringe of the binding with the adjoining edge and sew it down.
- Machine Fold the Binding: As soon as the binding is connected, fold it over to the again of the quilt and machine sew alongside the sting of the quilt, near the earlier stitching. This can safe the binding and provides it knowledgeable look.
Folks Additionally Ask
How do you bind a quilt and not using a binding device?
You’ll be able to bind a quilt and not using a binding device by utilizing a easy fold-over method. Pin the binding across the edges of the quilt and fold it over to the again. Machine sew alongside the sting of the quilt, near the fold of the binding.
What’s the easiest way to hitch quilt binding strips?
Bias Becoming a member of:
Lower bias strips of material and be part of them collectively utilizing a diagonal seam. This technique prevents fraying and creates a extra skilled end.
Straight Becoming a member of:
Lower straight strips of material and be part of them along with a straight seam. Align the sides fastidiously to make sure a easy joint.
How do you hand bind a quilt?
Hand binding a quilt entails stitching the binding across the edges of the quilt by hand. This technique provides a extra conventional and complicated look. Use a small needle and powerful thread to safe the binding.
