How To Change Trans Fluid On 2016 Honda Crv
Altering the transmission fluid in your 2016 Honda CR-V is a crucial a part of sustaining your car. The transmission fluid helps to lubricate and funky the transmission, and it additionally helps to forestall put on and tear. Over time, the transmission fluid can change into soiled and contaminated, which might result in issues with the transmission. You will need to change the transmission fluid repeatedly to maintain your transmission working easily.
Supplies You Will Want
- New transmission fluid
- Drain pan
- Funnel
- Wrench
- Rags
Step 1: Security First
Earlier than you begin working in your automobile, it is necessary to take some security precautions. Park your automobile on a degree floor and have interaction the parking brake. Enable the engine to chill down fully. Find the transmission fluid drain plug and place the drain pan beneath it.
Step 2: Drain the Outdated Fluid
Use a wrench to loosen the drain plug and permit the previous fluid to empty into the pan. As soon as the fluid has stopped draining, exchange the drain plug and tighten it securely.
Step 3: Add New Fluid
Use a funnel so as to add new transmission fluid to the transmission. Add fluid till the extent reaches the "Full" mark on the dipstick. Change the dipstick and tighten the cap.
Step 4: Verify the Fluid Degree
Begin the engine and let it run for a couple of minutes. Shift by way of all the gears after which verify the transmission fluid degree once more. Add extra fluid if essential to carry the extent as much as the "Full" mark.
Gathering Supplies and Instruments
Important Supplies and Instruments
Earlier than embarking on the duty of fixing the transmission fluid in your 2016 Honda CR-V, it’s crucial to assemble all the required supplies and instruments. Guarantee you’ve gotten the next objects available:
Supplies:
- Honda Real CVT Transmission Fluid (roughly 6 liters)
- New transmission filter
- Transmission fluid pan gasket
Instruments:
| Instrument | Description |
|---|---|
| 10mm socket wrench | For eradicating transmission pan bolts |
| 17mm socket wrench | For loosening fill plug and drain plug |
| Fluid drain pan | To catch the previous transmission fluid |
| Funnel | For pouring within the new transmission fluid |
| Clear rags | For cleansing up any spills or particles |
| Torque wrench | For tightening bolts to specified torque values |
Finding the Transmission
1. Security First
Earlier than you begin, make sure the car is parked on a flat and secure floor. Interact the parking brake to forestall any motion. Enable the engine to chill fully to keep away from burns or accidents.
2. Figuring out the Transmission
Find the transmission pan beneath the car. It’s normally a rectangular-shaped steel pan positioned on the backside of the transmission housing. To determine it precisely, seek the advice of your car proprietor’s guide or discuss with a web-based diagram particularly to your 2016 Honda CR-V mannequin.
As soon as the transmission pan is recognized, it is important to scrub the encircling space with a degreaser to take away any oil or particles that will intervene with the following steps. This may assist stop contamination through the fluid change.
Draining the Outdated Fluid
1. Be sure your Honda CR-V is parked on a degree floor and the engine is cool.
2. Find the drain plug on the transmission pan. It’s normally a 17mm bolt positioned on the backside of the pan.
3. Use a clear oil drain pan to catch the previous fluid. Place the drain pan underneath the drain plug.
4. Use an applicable software (corresponding to a socket wrench or field wrench) to loosen the drain plug. Watch out to not overtighten the plug, as this could harm the transmission pan.
5. Enable the previous fluid to empty fully into the drain pan. This will take a number of minutes.
6. As soon as the previous fluid has drained, clear the drain plug and reinstall it. Tighten the drain plug to the desired torque utilizing a torque wrench.
7. Get rid of the previous fluid correctly at a neighborhood recycling heart or automotive restore store.
| Step | Motion |
|---|---|
| 1 | Park the car on a degree floor with the engine cool. |
| 2 | Find the drain plug on the transmission pan. |
| 3 | Place a clear oil drain pan underneath the drain plug. |
| 4 | Use an applicable software to loosen the drain plug. |
| 5 | Enable the previous fluid to empty fully. |
| 6 | Clear the drain plug and reinstall it. |
| 7 | Get rid of the previous fluid correctly. |
Changing the Transmission Pan Gasket
To switch the transmission pan gasket, you’ll need the next instruments and supplies:
- 10mm socket wrench
- 17mm socket wrench
- New transmission pan gasket
- Transmission fluid
- Funnel
- Rags
Steps:
1. Place the car on a degree floor and have interaction the parking brake.
2. Find the transmission pan on the backside of the transmission. There are two massive bolts holding it in place.
3. Use the 17mm socket wrench to take away the 2 bolts.
4. Fastidiously decrease the transmission pan and drain the transmission fluid right into a drain pan.
Cleansing the Transmission Pan and Magnets
As soon as the transmission pan is eliminated, you’ll need to scrub it and the magnets. Eradicating dust and particles will assist stop contamination of the brand new fluid and assist the pan seal correctly. Use a clear rag to wipe the pan clear. Use a brush and solvent to take away the dust and particles from the magnets. Examine the magnet for any steel shavings or different international materials. Should you discover any, it could point out a transmission downside. seek the advice of a professional mechanic for additional analysis.
| Elements Wanted | Amount |
|---|---|
| Transmission Pan Gasket | 1 |
| Transmission Fluid | 3-4 quarts |
5. Apply a skinny bead of RTV sealant to the lip of the brand new transmission pan gasket.
6. Fastidiously place the brand new gasket on the transmission pan.
7. Elevate the transmission pan and align it with the transmission.
8. Hand-tighten the 2 bolts.
9. Use the 17mm socket wrench to tighten the bolts to 18 ft-lbs.
10. Refill the transmission with the desired quantity of fluid.
11. Begin the engine and let it run for a couple of minutes.
12. Verify for leaks.
Putting in the New Transmission Filter
Changing the transmission filter is a vital step in making certain the graceful and environment friendly operation of your 2016 Honda CR-V. This is learn how to do it:
- Collect the required supplies: New transmission filter, transmission fluid, drain pan, funnel, and socket wrench.
- Add New Transmission Fluid: Check with your car’s service guide for the really helpful quantity of transmission fluid. Use the funnel so as to add the fluid by way of the dipstick tube.
Find the Transmission Filter
It’s sometimes positioned on the facet or backside of the transmission housing. Check with your car’s service guide for the precise location.
Take away the Transmission Pan
Loosen the bolts holding the transmission pan in place and gently pry it off. Watch out to not spill any transmission fluid.
Extract the Outdated Transmission Filter
Utilizing a pair of pliers or a screwdriver, take away the previous transmission filter from the transmission housing. Examine it for any particles or harm.
Examine the Transmission Pan
Whereas the transmission pan is off, examine it for any steel shavings or different particles that will point out inside transmission issues.
Set up the New Transmission Filter
Lubricate the gasket of the brand new transmission filter with a small quantity of fresh transmission fluid. Align it with the housing and firmly press it into place till it makes a clicking sound. Tighten any bolts that safe the filter.
Reinstall the Transmission Pan
Clear the transmission pan and gasket earlier than reinstalling it. Apply a skinny layer of gasket maker to the gasket and place the pan again on the transmission housing. Tighten the bolts securely.
Tightening the Transmission Pan Bolts
To complete the transmission fluid change, the transmission pan bolts have to be tightened. This step is essential to make sure there aren’t any leaks or free fittings. Listed below are detailed directions on learn how to tighten the transmission pan bolts in your 2016 Honda CR-V:
1. Find the transmission pan bolts
The transmission pan bolts are positioned across the perimeter of the transmission pan. They’re sometimes 10mm or 12mm bolts and will have washers beneath them.
2. Clear the bolt threads
Use a clear rag to wipe away any dust or particles from the bolt threads. This may assist stop cross-threading and guarantee a correct seal.
3. Apply thread sealant (non-obligatory)
For added safety towards leaks, you possibly can apply a small quantity of thread sealant to the bolt threads. Nevertheless, that is sometimes not vital for contemporary automobiles.
4. Tighten the bolts
Use a torque wrench to tighten the bolts to the desired torque. Check with the proprietor’s guide or restore guide for the precise torque specs. Tightening the bolts too loosely may cause leaks, whereas overtightening can harm the pan or bolts.
5. Comply with the tightening sequence
To make sure even tightening, comply with a selected tightening sequence. Begin by tightening the bolts positioned diagonally reverse one another. Then, steadily work your means across the pan, tightening the remaining bolts in a crisscross sample.
6. Double-check tightness
As soon as all of the bolts have been tightened, use the torque wrench to double-check the tightness. Guarantee all bolts are torqued to the correct specs. Moreover, you possibly can verify for any indicators of leaks by inspecting the pan and surrounding space after driving the car for a brief distance.
| Bolt Measurement | Torque Specification |
|---|---|
| 10mm | 9 ft-lb |
| 12mm | 13 ft-lb |
Filling the Transmission with New Fluid
As soon as the previous fluid has been drained, it is time to fill the transmission with new fluid. This is an in depth information on learn how to do it:
1. Find the fill plug.
The fill plug is normally positioned on the facet of the transmission case. It is sometimes a 17mm or 19mm bolt.
2. Take away the fill plug.
Use a wrench to fastidiously take away the fill plug. Watch out to not drop it into the transmission.
3. Insert the funnel into the fill gap.
Place a funnel into the fill gap to make it simpler to pour the brand new fluid.
4. Pour within the new fluid.
Begin pouring the brand new fluid into the funnel. The quantity of fluid wanted will rely upon the precise transmission. Seek the advice of your car’s proprietor’s guide for the correct quantity.
5. Verify the fluid degree.
As soon as you have poured within the new fluid, use a dipstick to verify the fluid degree. The dipstick needs to be inserted into the fill gap and pulled out to verify the fluid degree. The fluid needs to be between the “Full” and “Add” marks on the dipstick.
6. Repeat steps 4-5 till the fluid degree is right.
If the fluid degree is low, add extra fluid and verify the extent once more. Repeat this course of till the fluid degree is right.
7. Reinstall the fill plug.
As soon as the fluid degree is right, reinstall the fill plug. Tighten the plug securely, however don’t overtighten it.
| Instruments Wanted: |
|---|
| Wrench |
| Funnel |
| Dipstick |
Checking the Fluid Degree
Supplies you will want:
– Clear rag or paper towels
– Funnel
– Trans fluid
Step-by-step directions:
1. Park your CR-V on a degree floor and permit the engine to chill.
2. Find the transmission dipstick underneath the hood in the direction of the again of the engine.
3. Take away the dipstick and wipe it clear with a rag or paper towels.
4. Reinsert the dipstick totally into the transmission and pull it out once more.
5. Verify the fluid degree on the dipstick. It needs to be between the “COLD” and “HOT” marks.
6. If the fluid degree is low, add fluid by way of the dipstick tube utilizing a funnel.
7. Verify the fluid degree once more and repeat steps 6-7 till the fluid degree is right.
8. **Detailed Steps for Step 8:**
| Degree | Chilly | Sizzling |
|---|---|---|
| Overfilled | Above the HOT mark | Fluid can foam, overheat, and trigger transmission harm. |
| Appropriate | Between the COLD and HOT marks | Optimum fluid degree for correct transmission perform. |
| Underfilled | Under the COLD mark | Inadequate lubrication can result in untimely transmission put on and failure. |
- Reinsert the dipstick totally into the transmission.
- Begin the engine and let it run for a couple of minutes.
- Recheck the fluid degree to make sure it’s nonetheless right.
- When you’ve got any considerations in regards to the fluid degree or situation, seek the advice of a professional mechanic for additional help.
Flushing the Outdated Fluid
• Heat up the engine and switch it off.
• Find the transmission drain plug and place a drain pan beneath.
• Fastidiously take away the drain plug and permit the previous fluid to empty into the pan.
Changing the Filter
• As soon as the fluid has stopped draining, take away the transmission filter.
• Clear the filter housing and gasket floor.
• Lubricate the brand new filter gasket with recent transmission fluid and set up the brand new filter.
Refilling the Fluid
• Add 3.5 quarts of recent transmission fluid to the gearbox.
• Begin the engine and permit it to idle for a couple of minutes.
• Verify the transmission fluid degree utilizing the dipstick and add extra if vital.
Resetting the Transmission Adaptation Values
• Join a diagnostic scanner to the car’s OBD-II port.
• Navigate to the “Transmission” menu.
• Choose the “Reset Transmission Adaptation Values” choice.
• Comply with the on-screen prompts to finish the reset.
• This step can assist guarantee optimum transmission efficiency after the fluid change.
• Some fashions might not require this step, so it is really helpful to seek the advice of your car’s service guide for particular directions.
Finishing the Fluid Change
1. Reinstall the drain bolt. Be sure to tighten it securely, however keep away from overtightening.
2. Take away the fill bolt positioned close to the highest of the transmission case. Insert the funnel into the fill gap.
3. Pour the brand new fluid into the transmission, including it slowly to keep away from spills. Proceed pouring till the fluid degree reaches the underside of the fill gap.
4. Reinstall the fill bolt and tighten it securely.
5. Clear up any spilled fluid and get rid of the previous fluid and filter correctly.
6. Reset the transmission management unit (TCU) diversifications. This may be executed utilizing a scan software or by disconnecting the adverse terminal of the battery for half-hour.
7. Begin the engine and let it run for a couple of minutes, shifting by way of all of the gears.
8. Verify the transmission fluid degree once more and alter as vital.
9. Check drive the car to make sure that the transmission is shifting easily and there aren’t any leaks.
10. Extra Detailed Directions for Step 10:
a. Drive the car for about 10-15 miles, permitting the transmission to succeed in its working temperature.
b. Park the car on a degree floor and have interaction the parking brake.
c. Take away the transmission fluid dipstick and wipe it clear with a rag.
d. Reinsert the dipstick all the way in which after which pull it out once more. Verify the fluid degree on the dipstick. It needs to be inside the “scorching” vary indicated on the dipstick.
e. If the fluid degree is low, add extra fluid by way of the fill gap utilizing a funnel. If the fluid degree is overfilled, take away some fluid utilizing a turkey baster or syringe.
f. Reinsert the dipstick and recheck the fluid degree to make sure it’s right.
Easy methods to Change Trans Fluid on a 2016 Honda CR-V
Altering the transmission fluid in your 2016 Honda CR-V is a comparatively easy course of that may be accomplished in about an hour. This is a step-by-step information that can assist you get the job executed:
Supplies you will want:
- New transmission fluid (Honda recommends utilizing Honda Real ATF DW-1)
- New transmission filter (Honda half quantity 25430-PLR-003)
- New drain plug washer (Honda half quantity 94109-20000)
- 10mm socket wrench
- 17mm socket wrench
- Funnel
Directions:
- Park the CR-V on a degree floor and have interaction the parking brake.
- Find the transmission drain plug positioned on the underside of the transmission pan. Place a drain pan underneath the drain plug.
- Use a 17mm socket wrench to loosen the drain plug and permit the fluid to empty fully.
- As soon as the fluid has drained, exchange the drain plug and tighten it to 29 ft-lbs.
- Find the transmission filter positioned on the facet of the transmission pan. Use a 10mm socket wrench to take away the bolts holding the filter in place.
- Take away the previous filter and exchange it with the brand new one. Torque the bolts to eight ft-lbs.
- Clear the transmission pan and magnet of any steel shavings or particles.
- Reinstall the transmission pan and torque the bolts to eight ft-lbs.
- Use a funnel so as to add new transmission fluid by way of the dipstick tube. Add 3.1 quarts of fluid.
- Begin the engine and permit it to idle for a couple of minutes.
- Verify the transmission fluid degree utilizing the dipstick. The fluid degree needs to be between the “COLD” and “HOT” marks on the dipstick.
- Add extra fluid if vital and recheck the extent till it’s right.
Individuals Additionally Ask
How typically ought to I modify the transmission fluid on my 2016 Honda CR-V?
Honda recommends altering the transmission fluid each 30,000 miles or 2 years, whichever comes first.
What kind of transmission fluid ought to I exploit?
Honda recommends utilizing Honda Real ATF DW-1 transmission fluid.
Is it tough to vary the transmission fluid on a 2016 Honda CR-V?
No, it’s a comparatively easy course of that may be accomplished in about an hour with primary instruments.
Can I exploit a unique kind of transmission fluid?
No, Honda recommends utilizing solely Honda Real ATF DW-1 transmission fluid to make sure optimum efficiency and longevity of the transmission.
