Sustaining your car’s transmission fluid is essential for optimum efficiency and longevity. In the event you personal a 2008 or 2009 Ford Edge, it is advisable to periodically change the transmission fluid to maintain your automotive working easily. By following a couple of easy steps, you may accomplish this job with ease and make sure the continued well being of your car’s important elements.
Earlier than beginning the transmission fluid change course of, collect the mandatory instruments and supplies. You will want a brand new transmission filter, transmission fluid, a drain pan, a funnel, a torque wrench, and a pair of gloves. Moreover, it is advisable to put on security glasses to guard your eyes from splashes. After getting the mandatory tools, find the transmission drain plug, which is normally on the backside of the transmission pan, and the transmission dipstick, which is usually discovered close to the engine. To empty the outdated fluid, fastidiously take away the drain plug and permit it to empty fully into the drain pan.
After draining the outdated fluid, change the drain plug and tighten it to the desired torque. Subsequent, find the transmission filter and take away the bolts holding it in place. Set up the brand new transmission filter and tighten the bolts. Now, add the brand new transmission fluid by means of the dipstick tube utilizing a funnel. Examine the fluid stage on the dipstick and add extra fluid as wanted till it reaches the right mark. Lastly, begin the engine and let it idle for a couple of minutes, shifting by means of the gears to flow into the brand new fluid. Recheck the fluid stage and regulate as mandatory.
Collect Supplies and Put together Car
Supplies Required:
Earlier than initiating the transmission fluid change, it’s essential to assemble the mandatory supplies. Guarantee you’ve got the next objects:
| Merchandise | Specification |
|---|---|
| Transmission Fluid | Ford Mercon LV (approx. 5 quarts) |
| Transmission Filter | Ford OEM or equal |
| Transmission Pan Gasket | Ford OEM or equal |
| Drain Pan | Massive sufficient to carry at the very least 5 quarts of fluid |
| Funnel | For pouring new transmission fluid |
| Torque Wrench | For tightening drain plug and filter bolts |
| 10mm Socket or Wrench | For eradicating drain plug and filter bolts |
| Security Gloves | To guard fingers from scorching fluid |
| Rags or Towels | For cleansing up spills |
Car Preparation:
After getting gathered the required supplies, put together the car for the fluid change. Comply with these steps:
- Park the car on a stage floor and interact the parking brake.
- Open the hood and find the transmission fluid dipstick.
- Take away the dipstick and wipe it clear with a rag.
- Reinsert the dipstick and pull it out once more to test the fluid stage.
- If the fluid is at or under the “MIN” mark, it must be modified.
Find the Transmission Fluid Pan
As soon as you’ve got gathered the mandatory supplies, it is time to find the transmission fluid pan. It is sometimes discovered on the backside of the transmission, and it serves as a reservoir for the fluid. This is find out how to discover it:
- Park your automotive on a flat floor. If doable, elevate the entrance finish of your automotive utilizing ramps or jack stands to supply higher entry to the transmission fluid pan.
- Determine the transmission. It is normally situated on the entrance of the engine and is linked to the driveshaft. The transmission casing is usually made from steel and is bolted to the engine.
- Search for the transmission fluid pan. It is a steel pan connected to the underside of the transmission. It normally has a sq. or rectangular form and is held in place by bolts or screws.
This is a tip: The transmission fluid pan is usually stamped with the transmission mannequin or sort. This info might be helpful if you’ll want to buy a substitute pan or filter.
Find the Drain Plug
Underneath the car, find the transmission drain plug. It’s sometimes a black or silver bolt situated on the underside of the transmission pan.
Collect Instruments
|
|
|
|
Drain the Fluid
Place the drain pan below the drain plug. Utilizing a 17mm socket wrench, fastidiously loosen the drain plug and permit the outdated transmission fluid to empty into the pan. Be cautious because the fluid could also be scorching.
As soon as the fluid has stopped draining, tighten the drain plug securely.
In case you are altering the transmission filter, observe the producer’s directions to take away the outdated filter and set up the brand new one.
Examine the transmission fluid stage and add new fluid as wanted till it reaches the advisable stage on the dipstick.
Drain the Previous Fluid
1. Security First
Park your Ford Edge on a stage floor and interact the parking brake. Let the engine cool all the way down to keep away from any burns.
2. Find the Drain Plug
Crawl below the entrance of your car and find the transmission pan. It is normally a big steel pan situated on the backside of the transmission. Determine the drain plug, which is usually a 17mm or 19mm bolt.
3. Put together to Drain the Fluid
Place a big drain pan beneath the transmission pan to catch the outdated fluid. Make sure the drain pan is positioned to keep away from any spills. Loosen the drain plug barely, permitting the fluid to start out draining.
4. Full Fluid Drainage
Permit roughly 10-Quarter-hour for almost all of the outdated transmission fluid to empty out. Because the movement slows, tighten the drain plug again into place. Clear the drain plug and the encompassing space completely to stop any leaks.
Be aware: The quantity of fluid drained might range relying on the car’s mannequin and transmission sort. Confer with your proprietor’s guide for particular fluid capacities.
Clear the Drain Plug and Pan
After draining the transmission fluid, it is time to clear the drain plug and pan. Begin by wiping away any extra fluid with a clear rag. Then, examine the drain plug for any indicators of harm or put on. If the plug is broken, it should must be changed. Subsequent, use a brush to take away any particles from the pan and magnet. The magnet is designed to draw steel filings, so it is essential to wash it recurrently to stop them from circulating within the transmission fluid and inflicting harm.
As soon as the pan and drain plug are clear, it is time to reinstall them. First, apply a skinny layer of gasket maker to the drain plug and reinstall it within the pan. Tighten the plug to the producer’s specs (sometimes round 25-30 foot-pounds). Subsequent, reinstall the pan, ensuring to align it correctly and tighten the bolts to the producer’s specs (sometimes round 10-12 foot-pounds).
Examine the Transmission Filter
When you have the transmission pan off, it is a good time to examine the transmission filter. If the filter is soiled or clogged, it could possibly limit the movement of transmission fluid and trigger harm to the transmission. To take away the filter, merely unclip it from the valve physique. Examine the filter for any indicators of harm or put on. If the filter is broken, it should must be changed. To reinstall the filter, merely clip it again into place on the valve physique.
Set up the New Filter (if relevant)
In case your transmission filter is situated contained in the transmission pan, you may change it whenever you change the fluid. It is a easy course of:
- Find the filter within the transmission pan.
- Take away the outdated filter and discard it.
- Set up the brand new filter into the transmission pan.
- Bolt the transmission pan again onto the transmission.
In case your transmission filter is situated outdoors the transmission pan, you will have to observe particular directions on your car to entry and alter it. Seek the advice of your car’s guide or a web based discussion board for detailed steps.
Listed here are some further ideas for putting in a brand new transmission filter:
- Ensure that the brand new filter is the right sort and dimension on your car.
- Apply a skinny layer of transmission fluid to the gasket of the brand new filter.
- Tighten the transmission pan bolts to the desired torque.
- Begin the engine and test for leaks.
| Instruments You will Want |
|---|
| Wrench or socket set |
| New transmission fluid |
| New transmission filter (if relevant) |
| Clear rags |
Change the Drain Plug
7. Rigorously hand-tighten the drain plug again into the transmission pan till it’s cosy. Use a torque wrench to additional tighten the drain plug to the desired torque, sometimes between 25 and 30 foot-pounds (34 and 40 newton-meters). This ensures that the drain plug is securely mounted and won’t leak.
| Transmission Sort | Drain Plug Torque |
|---|---|
| 4-Velocity Computerized (4F50N) | 25 ft-lbs (34 Nm) |
| 4-Velocity Computerized (4F27E) | 30 ft-lbs (40 Nm) |
| 6-Velocity Computerized (6F50) | 30 ft-lbs (40 Nm) |
Overtightening the drain plug can harm the threads or the transmission pan. If you do not have a torque wrench, use a brand new drain plug and washer to make sure a correct seal.
Add the New Fluid
The ultimate step is so as to add the brand new fluid to the transmission. Use a funnel to pour the fluid into the dipstick tube. Add the fluid slowly, checking the dipstick recurrently to make sure you do not overfill the transmission.
As soon as you’ve got added the right amount of fluid, change the dipstick and tighten it securely. Begin the engine and let it run for a couple of minutes to flow into the brand new fluid. Then, shift by means of all of the gears to make sure the fluid is flowing correctly.
Extra Ideas for Including the New Fluid
Listed here are some further ideas for including the brand new fluid:
- Use the right sort of fluid on your transmission. Confer with your proprietor’s guide for the advisable fluid sort.
- Ensure that the funnel is clear earlier than utilizing it.
- Add the fluid slowly and test the dipstick recurrently to make sure you do not overfill the transmission.
- As soon as you’ve got added the right amount of fluid, change the dipstick and tighten it securely.
- Begin the engine and let it run for a couple of minutes to flow into the brand new fluid.
- Shift by means of all of the gears to make sure the fluid is flowing correctly.
| Instruments and Supplies | Amount |
|---|---|
| New transmission fluid | 4-6 quarts |
| Funnel | 1 |
Examine the Fluid Stage
Checking the transmission fluid stage is an important step in sustaining your 2008-2009 Ford Edge. This is an in depth information that will help you do it appropriately:
- Park the car on a stage floor. This can guarantee an correct fluid stage studying.
- Begin the engine and let it run for a couple of minutes. This can flow into the fluid and heat it to its correct working temperature.
- Shift by means of all of the gears. This can assist the fluid movement by means of all of the elements of the transmission.
- Find the transmission dipstick. It’s sometimes situated close to the highest of the transmission, both on the passenger or driver’s facet of the engine.
- Pull out the dipstick and wipe off any fluid utilizing a clear fabric.
- Reinsert the dipstick all the way in which into the transmission.
- Pull out the dipstick once more and test the fluid stage.
- The fluid stage ought to be between the "min" and "max" marks on the dipstick. If the fluid is under the "min" mark, it must be added.
- If the fluid is under the "min" mark, add fluid utilizing a funnel and a clear container. Use solely the kind of fluid advisable by the producer. Confer with the proprietor’s guide for the precise sort and quantity of fluid required.
**Extra Notes:**
| Fluid Stage Indicator | Motion |
|---|---|
| Fluid is under the “min” mark | Add fluid |
| Fluid is between the “min” and “max” marks | No motion wanted |
| Fluid is above the “max” mark | Drain extra fluid |
Keep away from overfilling the transmission, as this could trigger points with the shifting and lubrication of the transmission elements.
Finalize the Upkeep
10. **Double-Examine Fluid Stage and Reinstall Drain Plug**
With the engine nonetheless working, test the transmission fluid stage utilizing the dipstick. The fluid stage ought to be between the “HOT” and “COLD” marks on the dipstick. If the fluid stage is low, add extra fluid by means of the dipstick tube till it reaches the right stage.
As soon as the fluid stage is right, reinstall the drain plug and tighten it to the desired torque.
Reconnect the destructive battery terminal.
Begin the engine and let it run for a couple of minutes to flow into the brand new fluid.
Examine for leaks across the drain plug and filter. If there aren’t any leaks, your transmission fluid change is full.
Reset the transmission adaptive studying system by disconnecting the battery for at the very least half-hour. This can enable the transmission to relearn the shift patterns and optimize its efficiency.
| Step | Description |
|---|---|
| 1 | Double-check the transmission fluid stage utilizing the dipstick |
| 2 | Add extra fluid if mandatory |
| 3 | Reinstall the drain plug and tighten it to the desired torque |
| 4 | Reconnect the destructive battery terminal |
| 5 | Begin the engine and let it run for a couple of minutes |
| 6 | Examine for leaks across the drain plug and filter |
| 7 | Reset the transmission adaptive studying system by disconnecting the battery for at the very least half-hour |
Find out how to Change Transmission Fluid in a 2009-2008 Ford Edge
Common transmission fluid adjustments are essential for sustaining the well being and longevity of your Ford Edge’s transmission. This information will offer you step-by-step directions on find out how to carry out a transmission fluid change in your 2009-2008 Ford Edge.
Supplies and Instruments Required:
- New Transmission Fluid (Mercon LV or equal)
- Drain Pan
- Funnel
- 3/8-inch Socket Wrench
- 1/2-inch Socket Wrench
- Torque Wrench
- Rags
Step-by-Step Directions:
- Security First: Park your Ford Edge on a stage floor and interact the parking brake. Permit the engine to chill fully.
- Find the Drain Plug: Crawl below the car and find the transmission oil pan. The drain plug is usually situated on the backside of the pan.
- Drain the Previous Fluid: Place the drain pan below the drain plug and loosen it utilizing the three/8-inch socket wrench. Permit the outdated fluid to empty fully into the pan.
- Change the Drain Plug: As soon as the outdated fluid is drained, clear the drain plug and apply a brand new washer. Tighten the drain plug utilizing the torque wrench to the producer’s specs.
- Find the Fill Plug: The fill plug is usually situated on the facet of the transmission housing.
- Fill the Transmission: Utilizing the funnel, pour the brand new transmission fluid into the fill plug till it begins to overflow.
- Examine the Stage: Begin the engine and run it in park. Use the dipstick to test the fluid stage. Add extra fluid as wanted till the extent is between the "chilly" and "scorching" marks on the dipstick.
- Tighten the Fill Plug: As soon as the fluid stage is right, tighten the fill plug utilizing the torque wrench to the producer’s specs.
Folks Additionally Ask About Find out how to Change Transmission Fluid in 2009-2008 Ford Edge
How usually ought to I alter the transmission fluid in my 2009-2008 Ford Edge?
Ford recommends altering the transmission fluid each 30,000 to 60,000 miles, relying on driving circumstances.
What’s the greatest sort of transmission fluid for my 2009-2008 Ford Edge?
The advisable transmission fluid for a 2009-2008 Ford Edge is Mercon LV.
Can I alter the transmission fluid myself?
Sure, it’s doable to vary the transmission fluid your self with primary instruments and data. Nevertheless, if you’re not snug with this job, it’s endorsed to hunt skilled help.
