Disassembling a specialised carbon highway bike can look like an intimidating job, but it surely’s not as troublesome as you may suppose. By following these step-by-step directions, you possibly can take away your bike’s wheels, drivetrain, and different parts rapidly and safely. Earlier than you start, ensure you have the suitable instruments for the job. You may want a set of Allen wrenches, a torque wrench, and a sequence whip. Upon getting your instruments, discover a clear, well-lit workspace.
Step one is to take away the wheels. To do that, merely flip the bike the wrong way up and loosen the quick-release skewers on each wheels. As soon as the skewers are free, you possibly can pull the wheels straight out of the body. Subsequent, you may have to take away the cassette. To do that, use a sequence whip to carry the cassette in place when you loosen the lockring with a cassette device. As soon as the lockring is free, you possibly can take away the cassette by hand. Lastly, you may have to take away the crankset. To do that, loosen the bolts on each crank arms utilizing an Allen wrench. As soon as the bolts are free, you possibly can pull the crank arms straight off the underside bracket.
Now that you’ve got eliminated the wheels, cassette, and crankset, you possibly can start to disassemble the remainder of the bike. Take away the pedals, saddle, and handlebars. Lastly, loosen the bolts on the stem and take away the fork from the body. As soon as the fork is eliminated, you possibly can disassemble the remainder of the bike as wanted. By following these step-by-step directions, you possibly can disassemble your specialised carbon highway bike rapidly and safely. With a bit of follow, you can do it like a professional!
Eradicating the Wheels
Eradicating the wheels out of your Specialised carbon highway bike is a comparatively easy course of that may be accomplished in just a few steps. Earlier than you start, ensure you have the next instruments:
– 5mm Allen key
– Chain whip
– Cassette lockring device
– Tire levers
– Rags or towels
Step-by-step directions:
1. Shift into the smallest cassette cog
It will make it simpler to take away the chain from the cassette.
2. Take away the rear wheel
- Loosen the rear brake caliper: Use a 5mm Allen key to loosen the bolts that maintain the brake caliper in place. As soon as the bolts are free, you possibly can swing the caliper out of the best way.
- Shift into the smallest chainring: It will assist preserve the chain from falling off the entrance of the bike while you take away the rear wheel.
- Take away the chain from the rear cassette: Use the chain whip to carry the cassette in place when you use your different hand to take away the chain from the cassette. As soon as the chain is off, you possibly can pull the wheel straight again to take away it from the bike.
3. Take away the entrance wheel
- Loosen the entrance brake caliper: Use a 5mm Allen key to loosen the bolts that maintain the brake caliper in place. As soon as the bolts are free, you possibly can swing the caliper out of the best way.
- Take away the entrance wheel skewer: Find the entrance wheel skewer and pull it out of the wheel. As soon as the skewer is eliminated, you possibly can elevate the entrance wheel off the bike.
Eradicating the Backside Bracket and Chainrings
The underside bracket and chainrings join the pedals to the drivetrain. To exchange or service them, you may have to take away them. This is how:
Eradicating the Chainrings
1. Use a chainring bolt wrench to loosen the bolts securing the chainrings to the crank arms.
2. As soon as the bolts are free, elevate off the outer chainring.
3. For double and triple chainring setups, repeat steps 1-2 to take away the internal chainring.
Eradicating the Backside Bracket
1. Take away the crank arms from the underside bracket utilizing a crank arm puller.
2. Establish the kind of backside bracket you have got (e.g., press-fit, threaded). The removing course of will range relying on the sort.
Press-Match Backside Bracket Elimination:
| Device | Utilization |
|---|---|
| Backside Bracket Press | Presses the underside bracket out of the body |
| Backside Bracket Elimination Package | Hooks onto the underside bracket and makes use of a slide hammer to loosen it |
Threaded Backside Bracket Elimination:
1. Use a backside bracket wrench to loosen the threaded backside bracket cups from the body.
2. As soon as the cups are free, take away them by hand or with a backside bracket removing device.
Disconnecting the Brake Calipers
Brake calipers are the parts accountable for making use of strain to the brake pads, permitting you to decelerate or cease the bike. Disconnecting them is critical when eradicating the wheels or performing sure upkeep duties. Listed below are the steps to soundly disconnect brake calipers on a Specialised carbon highway bike:
Step 1: Collect instruments and supplies: You will want a 5mm Allen key and a set of latex gloves.
Step 2: Put on gloves: Latex gloves defend your palms from brake fluid and grease contamination.
Step 3: Find the caliper bolts: There are two caliper bolts on both sides of the bike. They’re sometimes situated on the again of the caliper.
Step 4: Loosen the caliper bolts: Utilizing a 5mm Allen key, rigorously loosen the caliper bolts, however don’t take away them utterly.
Step 5: Help the caliper: As soon as the bolts are free, use your palms to help the caliper to forestall it from dropping down.
Step 6: Take away the wheel: As soon as the caliper is supported, you possibly can take away the wheel. Confer with the “Eradicating the Wheels” part for detailed directions.
Step 7: Fastidiously tilt the caliper: With the wheel eliminated, rigorously tilt the caliper to the aspect. Keep away from pulling it ahead or backward excessively, as this could injury the hose connecting the caliper to the brake lever.
| Step | Motion |
|---|---|
| 1 | Collect instruments and supplies |
| 2 | Put on gloves |
| 3 | Find the caliper bolts |
| 4 | Loosen the caliper bolts |
| 5 | Help the caliper |
| 6 | Take away the wheel |
| 7 | Fastidiously tilt the caliper |
Packing and Storage
As soon as your bike is disassembled, it is time to pack it away securely. Listed below are some ideas:
9. Shield the fork and body
The fork and body are probably the most delicate elements of your bike, so it is vital to take additional care when packing them. Wrap them in bubble wrap or foam padding, after which place them in a motorbike bag or field. If you do not have a motorbike bag or field, you should use a cardboard field that is massive sufficient to suit the fork and body. Simply make sure to pad the field effectively with bubble wrap or foam padding.
To guard the fork, take away the entrance wheel and wrap the fork blades in bubble wrap or foam padding. Then, place the fork in a motorbike bag or field. If you do not have a motorbike bag or field, you should use a cardboard field that is massive sufficient to suit the fork. Simply make sure to pad the field effectively with bubble wrap or foam padding.
To guard the body, take away the rear wheel, seatpost, and handlebars. Then, wrap the body in bubble wrap or foam padding. You may as well place the body in a motorbike bag or field. If you do not have a motorbike bag or field, you should use a cardboard field that is massive sufficient to suit the body. Simply make sure to pad the field effectively with bubble wrap or foam padding.
As soon as the fork and body are wrapped and guarded, you possibly can retailer them in a cool, dry place. In the event you’re storing the bike for an extended time period, it’s possible you’ll need to put it in a motorbike storage bag.
**This is a desk summarizing the steps for packing and storing your bike:**
| Step | Directions |
|---|---|
| 1 | Take away the entrance wheel and wrap the fork blades in bubble wrap or foam padding. |
| 2 | Place the fork in a motorbike bag or field. |
| 3 | Take away the rear wheel, seatpost, and handlebars. |
| 4 | Wrap the body in bubble wrap or foam padding. |
| 5 | Place the body in a motorbike bag or field. |
| 6 | Retailer the fork and body in a cool, dry place. |
Reassembly Suggestions
1. Earlier than reassembling your bike, take a couple of minutes to wash all the parts, together with the body, wheels, and drivetrain.
2. Begin by attaching the wheels to the body. Be sure you accurately align the wheels and tighten the axle nuts securely.
3. Subsequent, set up the cassette and rear derailleur. Fastidiously align the cassette with the freehub physique and tighten the lockring securely.
4. Set up the chain. Begin by threading the chain via the rear derailleur after which over the entrance chainring.
5. Set up the entrance derailleur. Be sure you align the derailleur correctly and tighten the mounting bolts securely.
6. Set up the handlebars. Be sure you align the handlebars accurately and tighten the stem bolts securely.
7. Set up the brake levers. Be sure you accurately align the brake levers and tighten the mounting bolts securely.
8. Set up the saddle. Be sure you modify the saddle peak and angle to your liking.
9. Set up the pedals. Be sure you tighten the pedals securely.
10. Lastly, verify all the bolts and nuts to make sure that they’re correctly tightened. Additionally, make sure to lubricate all the shifting elements.
| Bolt or Nut | Torque (Nm) |
|---|---|
| Stem bolts | 5-7 |
| Handlebar clamps | 4-5 |
| Brake lever bolts | 3-4 |
| Saddle bolt | 5-6 |
| Pedals | 35-40 |
How To Disassemble A Specialised Carbon Roadbike
Disassembling a Specialised carbon highway bike generally is a daunting job, but it surely’s truly fairly easy when you comply with these steps:
- Take away the wheels. To do that, merely loosen the quick-release skewers or bolts on the axles and pull the wheels off.
- Take away the pedals. To do that, use a 15mm wrench to loosen the pedals after which pull them off.
- Take away the saddle. To do that, loosen the bolt that holds the saddle in place after which pull the saddle off.
- Take away the handlebars. To do that, loosen the bolts that maintain the handlebars in place after which pull the handlebars off.
- Take away the stem. To do that, loosen the bolts that maintain the stem in place after which pull the stem off.
- Take away the fork. To do that, loosen the bolts that maintain the fork in place after which pull the fork off.
- Take away the rear derailleur. To do that, loosen the bolts that maintain the rear derailleur in place after which pull the rear derailleur off.
- Take away the entrance derailleur. To do that, loosen the bolts that maintain the entrance derailleur in place after which pull the entrance derailleur off.
- Take away the underside bracket. To do that, use a backside bracket device to loosen the underside bracket after which pull the underside bracket out.
- Take away the body. To do that, merely elevate the body off of the bottom.
Upon getting disassembled your bike, you possibly can clear and examine the elements. Be sure you verify for any injury, akin to cracks or dents. In the event you discover any injury, you need to have it repaired by a professional bike mechanic.
Folks Additionally Ask
How do I do know if my Specialised carbon highway bike is broken?
There are just a few indicators that will point out that your Specialised carbon highway bike is broken:
- Cracks or dents within the body
- Bulges or mushy spots within the body
- Delamination of the carbon fiber layers
- Lack of stiffness or responsiveness
In the event you discover any of those indicators, you need to have your bike inspected by a professional bike mechanic.
How typically ought to I disassemble my Specialised carbon highway bike?
It’s best to disassemble your Specialised carbon highway bike at the least annually for an intensive cleansing and inspection. Nonetheless, when you trip your bike steadily, it’s possible you’ll have to disassemble it extra typically.
Can I disassemble my Specialised carbon highway bike myself?
Sure, you possibly can disassemble your Specialised carbon highway bike your self. Nonetheless, it is very important comply with the steps rigorously to keep away from damaging the bike. If you’re not comfy disassembling your bike your self, you need to have it disassembled by a professional bike mechanic.
