Are you going through difficulties in dismounting your DSLR C/Fd teleconverter? It is a frequent situation that many photographers encounter when working with teleconverter lenses. Whether or not you are knowledgeable photographer or an enthusiastic hobbyist, understanding the right strategies for eradicating a teleconverter is essential to keep away from damaging your invaluable gear. On this complete information, we’ll present step-by-step directions on find out how to safely dismount a C/Fd teleconverter out of your DSLR digicam.
Earlier than we dive into the dismounting course of, it is vital to grasp why teleconverters are utilized in pictures. A teleconverter is an optical system that matches between a digicam physique and a lens, successfully rising the focal size of the lens. This enables photographers to realize higher magnification with out the necessity for a bigger or costlier lens. Nonetheless, when it comes time to take away the teleconverter, it is important to method the duty with warning and observe the right procedures.
Step one in dismounting a C/Fd teleconverter is to make sure that the digicam is powered off and the lens is indifferent from the physique. Find the locking ring on the teleconverter, which is usually positioned close to the mount. Rigorously flip the locking ring counterclockwise to loosen it, however don’t take away it fully. Firmly grip the teleconverter and gently pull it straight backward, away from the digicam physique. Keep away from twisting or making use of extreme pressure, as this might harm both the teleconverter or the digicam mount. As soon as the teleconverter is indifferent, you may take away the locking ring and retailer the teleconverter and lens individually till you want them once more.
Preparation
Earlier than you start the dismounting course of, you will need to guarantee that you’ve all the required instruments and supplies. Here’s a detailed checklist of what you have to:
- Digicam physique
- C/Fd teleconverter
- Lens cleansing material
- Small screwdriver (non-compulsory)
After you have gathered all the required instruments and supplies, you may start the dismounting course of. Make sure you take your time and observe the steps rigorously to keep away from damaging your gear.
Security Precautions
Earlier than you start, you will need to take some security precautions to keep away from damaging your gear or injuring your self. Right here are some things to remember:
- All the time make it possible for your digicam is turned off earlier than you start dismounting the teleconverter.
- Watch out to not drop the teleconverter or your digicam, as this might harm the gear.
- Don’t use extreme pressure when dismounting the teleconverter, as this might harm the gear.
Security First
Earlier than dealing with any digicam gear, make it possible for it’s turned off and the lenses are eliminated.
Dismounting the C/Fd Teleconverter
To dismount the C/Fd teleconverter, observe these steps:
- Unfold the rear lens cap.
- Grip the teleconverter firmly with one hand and the digicam physique with the opposite hand.
- Whereas holding the digicam and teleconverter regular, press the lens launch button on the digicam physique and concurrently rotate the teleconverter counterclockwise till it stops.
- Carry the teleconverter straight up and away from the digicam physique.
Here’s a desk summarizing the steps:
| Step | Motion |
|---|---|
| 1 | Unfold the rear lens cap. |
| 2 | Grip the teleconverter and digicam physique firmly. |
| 3 | Press the lens launch button and rotate the teleconverter counterclockwise. |
| 4 | Carry the teleconverter straight up and away from the digicam physique. |
Lens Removing
1. **Take away the lens cap.** Maintain the lens cap in a single hand and the lens within the different hand. Gently pull the lens cap straight off the lens.
-
Maintain the lens firmly. Place one hand across the base of the lens, close to the digicam physique. Use your different hand to help the entrance of the lens.
-
Flip the lens counterclockwise. Whereas holding the lens firmly, flip the lens counterclockwise to detach it from the digicam physique. Make sure you use even strain and keep away from twisting the lens.
Listed below are some extra suggestions for eradicating a lens:
- If the lens is caught, don’t pressure it. Gently wiggle the lens backwards and forwards whereas turning it counterclockwise.
- Watch out to not drop the lens. If the lens falls, it may very well be broken.
- As soon as the lens is eliminated, retailer it in a protected place to stop harm.
Mount Rotation
The mount rotation function lets you rotate the teleconverter across the lens axis, which will be helpful for aligning the teleconverter’s optical axis with the lens’ optical axis. To rotate the mount, loosen the mount rotation screw utilizing the included Allen key. As soon as the screw is free, you may rotate the teleconverter by hand. Tighten the screw as soon as the teleconverter is within the desired place.
Listed below are some suggestions for utilizing the mount rotation function:
- Use a tripod to stabilize the digicam and lens.
- Concentrate on a distant object.
- Rotate the teleconverter till the picture is sharp.
- Tighten the mount rotation screw to safe the teleconverter in place.
The mount rotation function may also be used to create particular results, resembling swirling or panning.
| Teleconverter | Mount Rotation |
|---|---|
| Canon EF 1.4x III | Sure |
| Canon EF 2x III | Sure |
| Nikon AF-S TC-14E III | Sure |
| Nikon AF-S TC-17E II | Sure |
| Nikon AF-S TC-20E III | Sure |
Launch Button Location
The discharge button for a C/Fd teleconverter is usually situated on the aspect of the teleconverter, close to the lens mount. It’s often a small, recessed button that you just press to launch the teleconverter from the lens.
To launch the teleconverter, observe these steps:
1. Maintain the lens with one hand and the teleconverter with the opposite hand.
2. Press the discharge button on the aspect of the teleconverter.
3. Pull the teleconverter straight out from the lens.
The teleconverter will now be launched from the lens and you’ll take away it. In case you are having bother releasing the teleconverter, it’s possible you’ll want to use somewhat pressure. Nonetheless, watch out to not harm the lens or the teleconverter.
| Location | Description |
|---|---|
| Aspect of the teleconverter | Close to the lens mount |
| Small, recessed button | Press to launch the teleconverter |
Listed below are some extra suggestions for releasing a C/Fd teleconverter:
- Be sure that the lens and the teleconverter are correctly aligned earlier than making an attempt to launch the teleconverter.
- If the discharge button is caught, you may attempt utilizing a small screwdriver to softly pry it open.
- Watch out to not harm the lens or the teleconverter when releasing it.
Detaching the Teleconverter
To detach the teleconverter out of your digicam, observe these steps:
- Find the Launch Button: On the aspect of the teleconverter, there’s a small button labeled "Launch."
- Press the Launch Button: Press the discharge button gently to unlock the teleconverter from the digicam.
- Rotate the Teleconverter Counterclockwise: Whereas holding the discharge button pressed, rotate the teleconverter counterclockwise.
- Pull the Teleconverter Away: Proceed rotating the teleconverter till it’s absolutely indifferent from the digicam.
- Retailer the Teleconverter: Safely retailer the teleconverter in its protecting case or bag.
Eradicating the Teleconverter from the Lens
- Find the Mount Launch Button: On the teleconverter, there’s a smaller button labeled "Mount Launch."
- Press the Mount Launch Button: Press the Mount Launch button to unlock the teleconverter from the lens.
- Pull the Teleconverter Ahead: Gently pull the teleconverter ahead till it’s absolutely indifferent from the lens.
- Retailer the Teleconverter: Safely retailer the teleconverter in its protecting case or bag.
Word: When detaching the teleconverter, deal with it with care to keep away from any harm to the lens or digicam.
Submit-Dismount Inspection
As soon as the teleconverter has been dismounted, carry out a post-dismount inspection to make sure that each the digicam and teleconverter are in correct working order and that no harm occurred through the course of.
7. Examine the Teleconverter Mount
Completely examine the teleconverter mount, paying explicit consideration to the next:
- Any seen harm or put on, resembling scratches, dents, or chips.
- Be sure that the contacts are clear and freed from any corrosion or particles.
- Confirm that the locking mechanism is functioning appropriately and that it securely holds the teleconverter in place.
If any harm is discovered through the inspection, it is strongly recommended to seek the advice of a professional digicam technician to evaluate the severity of the harm and decide the required repairs.
| Inspection Merchandise | Verify for: |
|---|---|
| Mount floor | Scratches, dents, chips |
| Contacts | Corrosion, particles |
| Locking mechanism | Correct functioning, safe maintain |
Dismounting the Teleconverter
Observe these steps to securely take away the teleconverter out of your digicam lens:
-
Flip off the digicam. All the time energy down your digicam earlier than dealing with any lenses or equipment.
-
Take away the lens cap. Shield your lens by eradicating the cap earlier than attaching or detaching the teleconverter.
-
Maintain the digicam lens regular. Assist the lens with one hand to stop it from falling or inflicting harm.
-
depress the lens launch button. Find the button on the digicam physique or lens mount that releases the lens.
-
Rotate the teleconverter counterclockwise. Gently flip the teleconverter to the left to loosen its connection to the lens.
-
Pull the teleconverter straight off. As soon as loosened, rigorously pull the teleconverter straight in the direction of you to detach it.
-
Retailer the teleconverter safely. Shield the teleconverter by storing it in a clear, dry place.
-
Clear the lens and teleconverter mounts. Take away any mud or particles from the lens and teleconverter mounts utilizing a mushy brush or material.
Reattaching the Teleconverter (Non-compulsory)
To reattach the teleconverter, observe the identical steps in reverse order:
-
Align the crimson dots. Make sure the alignment marks (often crimson dots) on the teleconverter and lens match up.
-
Insert the teleconverter. Gently slide the teleconverter onto the lens mount and align the crimson dots.
-
Rotate the teleconverter clockwise. Flip the teleconverter clockwise till it locks securely into place.
-
Safe the lens. Reattach the lens to the digicam physique by aligning the crimson dots and urgent down till it clicks.
-
Change the lens cap. Shield your lens by changing the cap after reattaching the teleconverter.
Necessary Reminder:
-
Solely use suitable teleconverters designed in your particular digicam and lens.
-
Keep away from touching the glass surfaces of the teleconverter or lens.
-
Retailer your teleconverter in a dry, dust-free atmosphere when not in use.
Storage and Upkeep
To make sure the longevity and optimum efficiency of your C/Fd teleconverter, correct storage and upkeep are essential. Listed below are some tips to observe:
Dealing with
Deal with the teleconverter with care, avoiding any sudden jolts or impacts. Use each arms to help the digicam and lens when attaching or detaching the teleconverter.
Cleansing
Maintain the teleconverter clear through the use of a mushy brush or material to softly take away any mud or particles. Keep away from utilizing harsh cleansing brokers or abrasive supplies that would harm the fragile optical surfaces.
Storage
Retailer the teleconverter in a dry and dust-free atmosphere. Use a protecting case or bag to stop any scratches or harm throughout transportation. Keep away from exposing the teleconverter to excessive temperatures or humidity.
Upkeep
Periodically examine the teleconverter for any indicators of wear and tear or harm. For those who discover any points, seek the advice of a professional digicam technician for restore or upkeep.
Desk: Storage and Upkeep Guidelines
| Activity | Frequency |
|---|---|
| Clear the teleconverter | As wanted |
| Examine the teleconverter for harm | Periodically |
| Retailer the teleconverter correctly | Indefinitely |
By adhering to those tips, you may be sure that your C/Fd teleconverter stays in optimum situation and gives years of dependable service.
Troubleshooting Ideas
1. Guarantee Lens Compatibility
Verify that the teleconverter is designed to be used along with your particular lens mannequin. Compatibility points may cause difficulties in dismounting.
2. Verify Alignment
Align the white index dots on the lens and teleconverter appropriately earlier than making an attempt to mount or dismount.
3. Apply Agency Stress
Press down firmly and evenly on the discharge button whereas rotating the teleconverter counterclockwise to disengage it.
4. Disengage the Lock
In case your lens has a lock mechanism, guarantee it’s disengaged earlier than making an attempt to take away the teleconverter.
5. Clear Contacts
Soiled or obstructed electrical contacts can forestall correct disengagement. Clear them gently with a mushy brush or material.
6. Rotate Gently
Keep away from making use of extreme pressure whereas rotating the teleconverter. Rotate it easily and steadily till it comes free.
7. Keep away from Twisting
Don’t twist or torque the teleconverter as you dismount it. This will harm the mounting mechanism.
8. Use a Delicate Material
Shield the lens and teleconverter from scratches through the use of a mushy material or lens paper to deal with them.
9. Verify for Obstructions
Study the lens and teleconverter for any overseas objects or particles that will hinder dismounting.
10. Desk of Widespread Errors and Options
| Error | Answer |
|---|---|
| Teleconverter will not budge | Guarantee correct alignment, apply agency strain, and clear contacts. |
| Teleconverter rotates however does not disengage | Verify for obstructions, disengage the lock, and rotate extra firmly. |
| Teleconverter comes free unintentionally | Tighten the discharge button extra securely and examine the locking mechanism. |
How To Dismount C/Fd Teleconverter
To dismount a C/FD teleconverter, observe these steps:
- Maintain the teleconverter firmly in a single hand and the lens within the different hand.
- Align the index marks on the teleconverter and the lens.
- Rotate the teleconverter counterclockwise till it stops.
- Pull the teleconverter straight off the lens.
If the teleconverter is caught, you may attempt utilizing a rubber band or a bit of fabric to get a greater grip. You can even attempt gently tapping the teleconverter with a hammer or different object to loosen it.
Folks Additionally Ask
How do I take away a teleconverter from a Nikon lens?
To take away a teleconverter from a Nikon lens, observe these steps:
- Maintain the teleconverter firmly in a single hand and the lens within the different hand.
- Align the index marks on the teleconverter and the lens.
- Rotate the teleconverter counterclockwise till it stops.
- Pull the teleconverter straight off the lens.
What’s a C/FD teleconverter?
A C/FD teleconverter is a sort of lens adapter that’s used to extend the focal size of a lens. It’s sometimes used with SLR cameras.
