Within the realm of vaping, the NOVVO 2X Pod system stands as a testomony to innovation and comfort. Its revolutionary design and user-friendly interface have made it a favourite amongst vapers of all expertise ranges. Nonetheless, one key side of utilizing the NOVVO 2X Pod is mastering the artwork of filling it accurately. Whether or not you are a seasoned vaper or simply beginning your vaping journey, this complete information will give you the important steps and ideas to make sure a seamless and pleasurable vaping expertise along with your NOVVO 2X Pod.
Earlier than embarking on the filling course of, it’s essential to assemble the required supplies. You have to a NOVVO 2X Pod, your most well-liked e-liquid, and a clear material or paper towel. With this stuff at your disposal, you’ll be able to proceed with filling your NOVVO 2X Pod. To start, gently take away the mouthpiece from the pod by pulling it upwards. As soon as the mouthpiece is indifferent, you will note a small gap on the backside of the pod. That is the place you’ll insert the e-liquid. Utilizing the dropper supplied along with your e-liquid bottle, fastidiously fill the pod till it reaches the indicated fill line. Keep away from overfilling the pod, as this could result in leaking and different points.
After filling the pod, fastidiously reattach the mouthpiece by urgent it firmly into place. Be certain that it’s securely linked to forestall any e-liquid leakage. As soon as the mouthpiece is hooked up, wipe away any extra e-liquid which will have spilled onto the pod or your palms. Lastly, insert the stuffed pod into your NOVVO 2X system and revel in your vaping expertise. Bear in mind to prime the coil by taking a number of quick puffs with out inhaling earlier than vaping often. This step helps to saturate the coil adequately and prevents dry hits.
Inserting the Pod into the Gadget
Putting in the pod into your Novvo 2x system is a fast and simple course of. Observe these detailed steps to make sure a correct match:
-
Find the Pod Bay: Flip your Novvo 2x the other way up and open the magnetically secured pod bay located on the underside of the system.
-
Orient the Pod Accurately: Take a recent pod and guarantee its notch is aligned with the corresponding notch contained in the pod bay. The pod ought to match snugly into place.
- Desk of Pod Orientations:
Pod Sort Notch Alignment Single-use Pod Notch dealing with the entrance of the system Refillable Pod Notch dealing with the again of the system -
Safe the Pod Bay: As soon as the pod is inserted, shut the pod bay magnetically. Confirm that the pod is firmly secured by gently urgent on it. A delicate "click on" ought to point out a correct match.
-
Prime the Gadget: Take a number of light puffs on the mouthpiece to activate the pod. This may permit the e-liquid to saturate the coil, guaranteeing optimum vapor manufacturing and taste supply.
Filling the Chamber
The Novvo 2x Pod is a revolutionary new pod system that makes filling your favourite e-liquid a breeze. With its modern design, the Novvo 2x Pod contains a top-fill system that eliminates the necessity for messy and time-consuming bottom-filling.
To fill the Novvo 2x Pod, merely comply with these straightforward steps:
1. Take away the Pod
To take away the pod, gently pull it straight up from the system.
2. Find the Fill Port
The fill port is positioned on the highest of the pod. It’s coated by a small rubber stopper.
3. Fill the Chamber
Use the included e-liquid bottle to fill the chamber. The chamber holds as much as 2ml of e-liquid.
**Ideas for Filling the Chamber:**
- Use a needle-tip bottle or syringe to fill the chamber. This may assist to forestall spilling.
- Fill the chamber slowly to keep away from overflowing.
- Go away a small air bubble on the prime of the chamber.
| Step No. | Description |
|---|---|
| 1 | Find the Fill Port |
| 2 | Take away the rubber stopper |
| 3 | Fill the chamber to the highest |
| 4 | Exchange the rubber stopper |
Measuring the Right Dosage
To fill your Novvo 2x pod with the right dosage of remedy, comply with these steps:
1. Collect Your Supplies:
You have to your Novvo 2x pod, remedy vial, and diluent (if required).
2. Put together the Remedy:
In case your remedy requires dilution, combine it in line with the producer’s directions. Draw the diluted remedy right into a 1mL syringe.
3. Take away the Pod Cap:
Take away the cap from the Novvo 2x pod by gently pulling it straight up.
4. Fill the Pod:
Maintain the pod upright and insert the syringe needle into the fill port on prime. Slowly depress the syringe plunger to fill the pod. Be certain that there are not any air bubbles current inside the pod. If an air bubble seems, gently faucet the pod to dislodge the bubble and proceed filling. As soon as the specified dosage is reached, slowly withdraw the syringe needle.
5. Exchange the Pod Cap:
Place the cap securely again on prime of the pod by urgent it down till it clicks into place.
Avoiding Overfilling
Overfilling your NOVVO 2X pod can result in leaking and different points. To keep away from overfilling, comply with the following tips:
1. Fill the Pod Slowly
Take your time when filling the pod. This may enable you to keep away from spilling e-liquid over the perimeters.
2. Use the Fill Line
The NOVVO 2X pod has a fill line marked on the facet. Use this line to information you when filling the pod. Cease filling as soon as the e-liquid reaches the fill line.
3. Examine for Air Bubbles
As soon as you’ve got stuffed the pod, faucet it gently to launch any air bubbles. Air bubbles may cause the pod to leak.
4. Wipe Away Extra E-Liquid
When you spill any e-liquid on the pod or system, wipe it away with a clear material. This may assist forestall leaking.
5. Filling Chart
Beneath is a chart that gives further particulars on the filling course of for the NOVVO 2X pod:
Closing the Lid
As soon as the pod is stuffed, shut the lid by lining up the arrows on the pod and the system and urgent the lid down till it clicks into place. Be sure the lid is securely mounted to forestall any leaking or injury to the system.
Listed here are some further ideas for closing the lid:
1. Examine the alignment: Earlier than closing the lid, be sure that the fill port is dealing with the right means. If it is not aligned correctly, it could actually trigger leaks or injury to the system.
2. Press firmly: When closing the lid, apply agency and even stress to make sure a safe match. A free lid may cause the pod to leak or malfunction.
3. Keep away from overtightening: Whereas it is necessary to shut the lid securely, keep away from overtightening. Doing so can injury the pod or the system.
4. Examine for leaks: After closing the lid, test the pod and system for any indicators of leaking. If there are any leaks, clear the realm totally and check out closing the lid once more.
5. Seal the pod correctly: If the lid is just not closed correctly, it could actually permit air to enter the pod and oxidize the e-liquid. This may have an effect on the flavour and high quality of the vape.
6. Clear the lid: If the lid turns into soiled or sticky, clear it with a cotton swab dipped in rubbing alcohol. This may assist forestall any contamination.
7. Troubleshooting: When you’re having hassle closing the lid, test the next:
| Problem | Resolution |
|---|---|
| Lid not aligning | Examine the alignment of the pod and system. |
| Lid not closing securely | Press the lid extra firmly. |
| Lid overtightened | Loosen the lid and check out closing it once more. |
| Pod leaking | Examine for alignment, clear the realm, and check out closing the lid once more. |
| Pod not vaping correctly | Make sure the lid is closed correctly and test for leaks. |
The way to Fill Novvo 2x Pod
Filling the Novvo 2x pod is an easy course of that may be accomplished in a number of straightforward steps:
- Take away the pod from the system.
- Find the fill port on the facet of the pod.
- Insert the tip of your e-liquid bottle into the fill port.
- Squeeze a small quantity of e-liquid into the pod.
- Repeat steps 3 and 4 till the pod is full.
- Reinsert the pod into the system.
Ideas:
- Don’t overfill the pod, as this could trigger e-liquid to leak.
- Watch out to not get any e-liquid within the air gap.
- In case you are new to vaping, it’s endorsed to start out with a low nicotine energy e-liquid.
Individuals Additionally Ask
How typically ought to I refill my Novvo 2x pod?
The frequency with which it’s essential refill your Novvo 2x pod will depend upon how typically you vape. Nonetheless, as a normal rule of thumb, it is best to refill your pod when the e-liquid degree is low.
What kind of e-liquid can I take advantage of with my Novvo 2x pod?
You need to use any kind of e-liquid along with your Novvo 2x pod. Nonetheless, it is very important notice that some e-liquids could also be too thick for the pod to vaporize correctly. In case you are not sure whether or not or not an e-liquid is suitable along with your Novvo 2x pod, it’s at all times greatest to seek the advice of with the producer.
How do I clear my Novvo 2x pod?
To scrub your Novvo 2x pod, merely take away it from the system and wipe it down with a clear, dry material. You too can use a cotton swab to scrub the within of the pod.
