Reworking your kitchen is an excellent means of enhancing the aesthetic enchantment and performance of your private home. Among the many numerous upgrades that you could make, putting in crown molding on kitchen cupboards stands out as a very efficient method to elevate the general design. The delicate and chic contact of crown molding provides a contact of refinement to your kitchen house, turning it into a trendy and alluring space.
Putting in crown molding on kitchen cupboards is a comparatively easy process that requires minimal carpentry abilities and could be accomplished in a couple of easy steps. By following a step-by-step information and utilizing the best instruments and supplies, you’ll be able to obtain professional-looking outcomes with out the necessity for hiring an expert. The transformation that crown molding brings to your kitchen is really exceptional, and the sense of accomplishment you will really feel after finishing the mission your self is an added bonus.
Earlier than embarking on this mission, it is important to collect all the mandatory instruments and supplies. You may want a miter noticed, a nail gun, a degree, wooden filler, a caulk gun, and a wide range of nails and caulk. After getting all the things you want, you’ll be able to start by measuring and chopping the crown molding to the suitable lengths. At all times be sure that your cuts are exact and correct to make sure a seamless match.
Gathering Needed Supplies and Instruments
Supplies:
- Crown molding
- Adhesive or brad nails
- Filler (non-obligatory)
- Paint or stain (non-obligatory)
Instruments:
| Instrument | Objective |
|---|---|
| Miter noticed | Chopping the molding to the right angles |
| Brad nailer | Securing the molding to the cupboards |
| Measuring tape | Measuring and marking the molding |
| Caulk gun | Filling any gaps between the molding and the cupboards (non-obligatory) |
| Sandpaper | Smoothing any tough edges or transitions (non-obligatory) |
| Paintbrush or curler | Making use of paint or stain to the molding (non-obligatory) |
Measuring and Marking the Crown Molding
1. Decide the General Size
Measure the overall size of the cupboard run the place you propose to put in the crown molding. Add 12 inches to account for miter cuts on every finish. For instance, if the cupboard run is 10 ft (120 inches), you would wish 132 inches (120 + 12) of molding.
2. Measure and Minimize the Crown Molding
a. Miter Cuts for Outdoors Corners
* Mark the molding on the desired size minus 1 inch.
* Maintain a miter noticed at a 45-degree angle and reduce the molding on the marked line.
* The reduce ought to produce a 45-degree angle to facilitate a clean miter joint on the outdoors nook.
b. Miter Cuts for Inside Corners
* Mark the molding on the desired size minus 1 inch.
* Maintain a miter noticed at a 45-degree angle and reduce the molding backward from the marked line.
* The reduce ought to produce a 45-degree mirrored angle to create a cosy match within the inside nook.
c. Dry Becoming and Changes
* Dry match the crown molding segments collectively to make sure correct alignment.
* Use a pencil to mark any areas that have to be trimmed or adjusted for a good match.
* Repeat the chopping and dry becoming course of till the crown molding items match collectively seamlessly.
| Outdoors Nook | Inside Nook |
|---|---|
| Minimize at 45 levels | Minimize backward at 45 levels |
Putting in the Crown Molding on the Wall Cupboards
As soon as the crown molding is reduce and fitted to the wall, it is time to set up it on the cupboards. Begin by making use of a bead of building adhesive to the again of the molding, then press it into place on the cupboard. Use a nail gun to safe the molding with 1 1/4-inch brad nails, spacing them about 6 inches aside. You’ll want to countersink the nails barely so they do not protrude from the floor of the molding.
Coping Crown Molding
When putting in crown molding on the within corners of your cupboards, you will have to cope the molding in order that the 2 items match collectively seamlessly. To do that, you will want a coping noticed or a miter noticed with a coping sled attachment.
To manage crown molding utilizing a coping noticed, you will have to:
- Measure and mark the size of the molding you want.
- Minimize the molding to size utilizing a miter noticed.
- Lay the molding in your workbench with the highest edge going through up.
- Use a coping noticed to chop a sequence of small notches alongside the underside fringe of the molding, beginning about 1/4 inch from the tip and dealing your means in the direction of the middle. The notches must be about 1/8 inch deep and spaced about 1/4 inch aside.
- As soon as you’ve got reduce all the notches, use a chisel to take away the surplus wooden from between them.
- Take a look at the match of the molding by holding it as much as the cupboard nook. The molding ought to match snugly with none gaps.
- If the match just isn’t excellent, you can also make changes by rigorously chopping away extra wooden with the coping noticed or chisel.
To manage crown molding utilizing a miter noticed with a coping sled attachment, you will have to:
- Measure and mark the size of the molding you want.
- Minimize the molding to size utilizing a miter noticed.
- Connect the coping sled to your miter noticed.
- Lay the molding on the coping sled with the highest edge going through up.
- Use the coping sled to information the noticed as you narrow a sequence of small notches alongside the underside fringe of the molding, beginning about 1/4 inch from the tip and dealing your means in the direction of the middle. The notches must be about 1/8 inch deep and spaced about 1/4 inch aside.
- As soon as you’ve got reduce all the notches, use a chisel to take away the surplus wooden from between them.
- Take a look at the match of the molding by holding it as much as the cupboard nook. The molding ought to match snugly with none gaps.
- If the match just isn’t excellent, you can also make changes by rigorously chopping away extra wooden with the coping noticed or chisel.
Putting in the Crown Molding on the Base Cupboards
After getting all your supplies and instruments assembled, you’ll be able to start putting in the crown molding on the bottom cupboards. Listed here are the steps:
1. Measure and Minimize the Crown Molding
Measure the size of the again of the cupboard. Minimize a chunk of crown molding to that size. If it is advisable to reduce a miter joint, use a miter noticed.
2. Apply Adhesive to the Crown Molding
Apply a bead of adhesive to the again of the crown molding. Use a caulk gun to use the adhesive evenly.
3. Place the Crown Molding
Place the crown molding on the again of the cupboard, aligning the underside fringe of the molding with the highest fringe of the cupboard. Press the molding into place, guaranteeing that the adhesive is making contact with the cupboard.
4. Safe the Crown Molding
Hammer small nails by means of the face of the crown molding into the cupboard. Area the nails about 6 inches aside. Countersink the nails with a nail set.
5. Fill Nail Holes and Paint
Fill the nail holes with wooden filler. Enable the wooden filler to dry utterly. Sand the wooden filler clean. Paint the crown molding to match the cupboards.
| Instrument | Objective |
|---|---|
| Miter noticed | To chop miter joints within the crown molding |
| Caulk gun | To use adhesive to the crown molding |
| Hammer | To safe the crown molding to the cupboard |
| Nail set | To countersink the nails |
| Wooden filler | To fill the nail holes |
| Sandpaper | To clean the wooden filler |
| Paint | To color the crown molding to match the cupboards |
Nailing and Gluing the Crown Molding in Place
Now that your crown molding is reduce and fitted, it is time to nail and glue it in place. It is a comparatively easy course of, nevertheless it’s vital to take your time and do it rigorously to make sure a professional-looking end.
To nail the crown molding, use a 1-1/2-inch brad nailer or 2-inch ending nails. Drive the nails by means of the face of the molding into the highest of the cupboard body. You’ll want to countersink the nails barely in order that they do not present by means of the paint or end.
As soon as the crown molding is nailed in place, apply a bead of wooden glue to the again of the molding and press it firmly into place. Use a humid material to wipe away any extra glue that squeezes out.
To make sure a safe maintain, it’s possible you’ll wish to clamp the crown molding in place for a number of hours whereas the glue dries. As soon as the glue is dry, you’ll be able to take away the clamps and revel in your new crown molding!
Listed here are some further suggestions for nailing and gluing crown molding:
Use a brad nailer or ending nails.
Brad nails are thinner and fewer seen than ending nails. Nevertheless, ending nails are stronger and supply a safer maintain. In the event you’re utilizing a brad nailer, make sure you use nails which might be lengthy sufficient to penetrate by means of the molding and into the cupboard body.
Countersink the nails.
Countersinking the nails will assist to cover them from view. To countersink a nail, use a nail set to drive the nail barely beneath the floor of the molding.
Apply a bead of wooden glue to the again of the molding.
Wooden glue will assist to create a powerful bond between the molding and the cupboard body. You’ll want to apply the glue evenly to your complete floor of the molding.
Clamp the molding in place.
Clamping the molding in place will assist to make sure a safe maintain whereas the glue dries. Use clamps which might be massive sufficient to span your complete width of the molding.
Here’s a desk summarizing the steps for nailing and gluing crown molding:
| Step | Directions |
|---|---|
| 1 | Minimize the crown molding to size. |
| 2 | Match the crown molding to the cupboard body. |
| 3 | Nail the crown molding in place. |
| 4 | Apply a bead of wooden glue to the again of the molding. |
| 5 | Press the molding firmly into place. |
| 6 | Wipe away any extra glue. |
| 7 | Clamp the molding in place for a number of hours whereas the glue dries. |
Filling and Sanding Nail Holes
As soon as the crown molding is secured, it is important to hide the nail holes for a seamless end.
Supplies:
- Wooden filler
- Putty knife
- Sandpaper (150-grit and 220-grit)
- Tack material
Steps:
1.
Apply a skinny layer of wooden filler to every nail gap utilizing the putty knife. Clean over the holes guaranteeing they’re utterly stuffed.
2.
Enable the wooden filler to dry in response to the producer’s directions. Drying instances might differ.
3.
As soon as dry, sand the stuffed areas utilizing 150-grit sandpaper to take away extra filler and clean the floor.
4.
Swap to positive 220-grit sandpaper for additional smoothing and mixing the stuffed areas with the encompassing wooden.
5.
Wipe away any sanding mud utilizing a tack material earlier than portray or staining.
Further Suggestions:
For an ideal match, use wooden filler particularly designed for the kind of wooden your cupboards are made from.
For bigger nail holes, apply a number of skinny layers of wooden filler, permitting every layer to dry earlier than sanding. This prevents shrinkage and cracking.
If the wooden filler begins to sag earlier than drying, gently press it again into the outlet utilizing a toothpick or the sting of the putty knife.
After sanding, examine the stuffed areas below totally different lighting situations to make sure they’re utterly blended and invisible.
Priming and Portray the Crown Molding
As soon as the crown molding is fitted and secured, it is time to prime and paint it. Listed here are the steps to make sure a professional-looking end:
Priming the Molding
Use a high-quality wooden primer that’s appropriate along with your paint. Apply a skinny, even coat to your complete molding utilizing a brush or curler. Enable the primer to dry utterly earlier than shifting on to the subsequent step.
Making use of the Paint
Select a paint that enhances your kitchen cupboards and different cabinetry. Apply two skinny, even coats of paint to the molding, permitting every coat to dry completely earlier than making use of the subsequent. Use a fine-bristle brush for detailed areas and a curler for bigger surfaces.
Ending Touches
As soon as the paint is totally dry, you’ll be able to add the ending touches to your crown molding:
- Caulk the Joints: Apply a skinny bead of caulk to the seams between the molding and the cupboards. Use a caulk gun and a clean instrument to use the caulk evenly.
- Contact Up: Examine the molding for any imperfections or areas that want touching up. Use a small brush and contact up these areas with the matching paint colour.
- Seal the Molding: Apply a transparent polyurethane end to guard the molding and improve its shine. Use a delicate brush or material to use the polyurethane evenly.
Portray Strategies for Intricate Crown Molding
For crown molding with intricate particulars, use the next strategies for a flawless end:
| Approach | Description |
|---|---|
| Dry Brush Approach: | Load a dry brush with a small quantity of paint and gently brush over the raised areas of the molding to spotlight the main points. |
| Glazing: | Apply a skinny glaze over the paint so as to add depth and dimension to the main points. |
| Highlighting: | Use a light-colored paint to spotlight the raised areas of the molding, making a extra ornate look. |
How To Set up Crown Molding On Kitchen Cupboards
Listed here are the steps on easy methods to set up crown molding on kitchen cupboards:
- Measure and reduce the crown molding. Measure the size of the cupboard and reduce the crown molding to dimension. Use a miter noticed to chop the molding at a 45-degree angle.
- Connect the crown molding to the cupboard. Apply a bead of building adhesive to the again of the crown molding and press it into place on the cupboard. Use a brad nailer to safe the molding to the cupboard.
- Fill the nail holes. Fill the nail holes with wooden filler and permit it to dry. Sand the wooden filler clean as soon as it’s dry.
- Paint or stain the crown molding. Paint or stain the crown molding to match the cupboards or the remainder of the kitchen décor.
Individuals Additionally Ask About How To Set up Crown Molding On Kitchen Cupboards
What’s crown molding?
Crown molding is an ornamental molding that’s put in on the prime of a wall or cupboard. It’s used so as to add a of entirety to a room and to create a extra elegant look.
How do I select the best crown molding for my kitchen cupboards?
When selecting crown molding to your kitchen cupboards, contemplate the type of your cupboards and the general décor of your kitchen. You’ll be able to select from a wide range of profiles and sizes of crown molding to seek out the right match to your kitchen.
How do I reduce crown molding at a 45-degree angle?
To chop crown molding at a 45-degree angle, use a miter noticed. Set the noticed to a 45-degree angle and thoroughly reduce the molding. You’ll want to put on security glasses when utilizing an influence noticed.
How do I connect crown molding to cupboards?
To connect crown molding to cupboards, apply a bead of building adhesive to the again of the molding and press it into place on the cupboard. Use a brad nailer to safe the molding to the cupboard.
