Embark on a exceptional journey to boost the visible prowess of your Atomos Shinobi. By integrating customized Look Up Tables (LUTs), you may unlock a world of transformative colour grading prospects, turning your footage right into a cinematic masterpiece. On this complete information, we’ll meticulously information you thru the method of putting in LUTs in your Shinobi, empowering you to raise your visible storytelling to new heights.
To start the set up, set up a connection between your Shinobi and a pc. Make the most of the offered USB cable to bridge the hole between these two gadgets. As soon as a seamless connection is established, navigate to the inner storage drive of your Shinobi. Inside the drive, find and open the “LUTS” folder, which serves because the designated repository for customized LUTs.
The method of including LUTs is remarkably easy. Merely switch the specified LUT recordsdata, sometimes bearing the “.dice” extension, into the “LUTS” folder. Upon profitable switch, the Shinobi will routinely detect and index the brand new LUTs, making them available to your artistic endeavors. With the LUTs at your disposal, now you can effortlessly apply them to your footage, unleashing a spectrum of vibrant colours, enhanced distinction, and tailor-made aesthetics. Embrace the transformative energy of LUTs and elevate your cinematic creations to unprecedented heights.
Importing LUTs by way of USB Drive
Enhancing your Atomos Shinobi with customized LUTs by way of a USB drive is a breeze. To embark on this course of, comply with these meticulously detailed steps:
1. Collect Your Supplies:
Earlier than delving into the set up course of, guarantee you will have the next objects at your disposal:
– Atomos Shinobi
– USB drive formatted in FAT32 or exFAT
– LUT recordsdata in .dice format
2. Put together the USB Drive:
Start by creating a brand new folder in your USB drive and naming it “LUTs.” Switch your required LUT recordsdata into this devoted folder. Be sure that the LUT recordsdata are within the .dice format for compatibility with the Atomos Shinobi.
3. Join and Import LUTs:
Join the USB drive to your Shinobi utilizing the offered USB-C cable. Navigate to the Enter/Output menu on the Shinobi’s show and choose the USB drive because the enter supply. Inside the USB drive menu, find and open the “LUTs” folder containing your LUT recordsdata. Choose the specified LUT file and press the “Import” button. The Shinobi will import the LUT and retailer it in its inside reminiscence for future use.
Putting in LUTs from an SD Card
To put in LUTs from an SD card, comply with these steps:
1. Put together your SD card
Format an SD card as FAT32. Create a folder on the SD card named “LUTS”.
2. Copy the LUT recordsdata to the SD card
Copy the LUT recordsdata (.dice or .3dl recordsdata) to the “LUTS” folder on the SD card.
3. Insert the SD card into the Shinobi
Insert the SD card into the Shinobi’s SD card slot. The Shinobi will routinely detect the LUT recordsdata on the SD card.
3.1. Importing LUTs from the SD card
To import LUTs from the SD card:
- Navigate to the “Settings” menu on the Shinobi.
- Choose the “LUT” tab.
- Choose the “Import LUTs” choice.
- Choose the “SD Card” choice.
- Choose the LUTs you need to import.
- Click on the “Import” button.
3.2. Making use of LUTs to footage
To use LUTs to footage:
- Within the “Settings” menu, choose the “LUT” tab.
- Choose the LUT you need to apply.
- Click on the “Apply” button.
Copying LUTs by way of File Switch Protocol (FTP)
Transferring LUTs to your Atomos Shinobi by FTP means that you can use quite a lot of customized colour profiles. Here is a step-by-step information:
- Allow FTP in your Atomos Shinobi by going to the “Community” menu and deciding on “Allow FTP Server”.
- Join your Shinobi to a Wi-Fi community or use an Ethernet cable.
- Get hold of the Shinobi’s IP tackle from the show.
- Utilizing an FTP consumer comparable to FileZilla, enter the Shinobi’s IP tackle into the “Host” subject and connect with the system:
FTP Settings Shinobi Host [Shinobi’s IP Address] Username admin Password atomos123 Port 21 - Within the FTP consumer, navigate to the “LUTs” folder in your Shinobi (normally positioned at /mnt/information/LUTs).
- Drag and drop the specified LUT recordsdata out of your laptop to the “LUTs” folder on the Shinobi.
- The Shinobi will routinely import the LUT recordsdata and make them obtainable to be used in your initiatives.
Loading LUTs by way of the Atomos Cloud
The Atomos Cloud gives a handy option to load LUTs onto your Shinobi monitor. Comply with these steps to get began:
- Create an Atomos Cloud account and log in.
- Choose “LUTs” from the menu.
- Click on “Add LUT” and choose the LUT file you need to add.
- As soon as the LUT is uploaded, will probably be obtainable within the “My LUTs” part.
- In your Shinobi monitor, go to the “Setup” menu and choose “LUTs.”
- Beneath “Cloud LUTs,” choose the LUT you need to load.
Importing Customized LUTs
Along with the LUTs offered by Atomos, you can too add your individual customized LUTs to the Atomos Cloud. Here is how:
- Create a brand new LUT file in a appropriate format (e.g., .dice, .3dl).
- Log into your Atomos Cloud account and choose “LUTs” from the menu.
- Click on “Add LUT” and choose the choice to add a customized LUT.
- Navigate to the situation of your LUT file and choose it.
- As soon as the LUT is uploaded, will probably be obtainable within the “My LUTs” part.
Customized LUTs (.dice & .3dl codecs)
The Atomos Shinobi helps customized LUTs within the .dice and .3dl codecs. These LUTs will be created utilizing third-party software program or downloaded from on-line assets. To load a customized LUT, comply with these steps:
- Create a LUT file in both the .dice or .3dl format.
- Copy the LUT file to the “LUTs” folder in your Shinobi’s microSD card.
- In your Shinobi monitor, go to the “Setup” menu and choose “LUTs.”
- Beneath “Customized LUTs,” choose the LUT you need to load.
LUTs Desk
| LUT Format | Bit Depth | Colour Area |
|---|---|---|
| .dice | 10-bit or 12-bit | Log or linear |
| .3dl | 10-bit or 12-bit | Log or linear |
Word: The Shinobi helps 3D LUTs with a measurement of 17x17x17 or 33x33x33.
Utilizing the LUT Picker Menu
To entry the LUT Picker menu, press the ‘MENU’ button on the Shinobi. Then, navigate to the ‘Instruments’ tab and choose ‘LUT Picker’.
The LUT Picker menu will show a listing of obtainable LUTs. To load a LUT, merely spotlight it and press the ‘ENTER’ button.
As soon as a LUT has been loaded, will probably be utilized to all incoming footage. You may preview the consequences of the LUT by urgent the ‘PLAY’ button.
Loading Customized LUTs
You can too load customized LUTs onto the Shinobi. To do that, you will want to create a LUT file in a appropriate format, comparable to .dice or .3dl.
After getting created a LUT file, you may switch it to the Shinobi utilizing a USB drive. To do that, join the USB drive to the Shinobi and navigate to the ‘IMPORT’ folder. Then, copy the LUT file to the ‘LUTS’ folder.
As soon as the LUT file has been copied, you may entry it from the LUT Picker menu. Merely navigate to the ‘Customized’ tab and choose the LUT file.
LUT Picker Menu Settings
The LUT Picker menu provides quite a lot of settings that assist you to customise the way in which LUTs are utilized. These settings embody:
| Setting | Description |
|---|---|
| LUT Mode | Determines how the LUT is utilized to the footage. Choices embody ‘Full’, ‘Half’, and ‘Off’. |
| LUT Energy | Adjusts the depth of the LUT. |
| LUT Preview | Permits or disables the LUT preview. |
Customizing LUT Collections
The Atomos Shinobi means that you can customise your LUT collections to fit your preferences and workflow. Comply with these steps to import customized LUTs and create your individual collections:
1. Obtain LUT Information
Purchase LUT recordsdata from trusted sources or create your individual utilizing colour grading software program.
2. Copy LUT Information
Copy the LUT recordsdata to a USB drive.
3. Format USB Drive
Format the USB drive as FAT32 to make sure compatibility with the Shinobi.
4. Insert USB Drive
Insert the USB drive into the Shinobi’s USB port.
5. Entry LUT Menu
On the Shinobi’s foremost menu, navigate to “Settings” > “LUTs” > “Import LUTs.”
6. Choose LUT Information
Choose the LUT recordsdata you need to import by checking the containers subsequent to them.
7. Import LUTs
Click on the “Import” button to repeat the LUTs to the Shinobi.
8. Create Customized Collections
To create a customized LUT assortment, navigate to the “Settings” > “LUTs” menu and choose “Handle Collections.”
| Choice | Description |
|---|---|
| Create Assortment | Identify and create a brand new LUT assortment. |
| Add LUT to Assortment | Choose an present LUT and add it to the present assortment. |
| Rename Assortment | Change the title of the present assortment. |
| Delete Assortment | Take away the present assortment and all its related LUTs. |
After getting created a customized assortment, you may choose it from the “LUTs” menu to use its LUTs to your footage.
Easy methods to Set up LUTs on Atomos Shinobi
LUTs (Look Up Tables) are a strong device for colour grading footage. They can be utilized to create quite a lot of appears, from refined changes to dramatic colour modifications. For those who’re utilizing an Atomos Shinobi monitor, you may set up LUTs to preview your footage with totally different colour grades.
To put in LUTs in your Atomos Shinobi, you will want:
- A USB flash drive formatted to FAT32
- LUT recordsdata in .dice format
After getting your LUT recordsdata, comply with these steps:
- Copy your LUT recordsdata to the foundation listing of your USB flash drive.
- Insert the USB flash drive into the USB port in your Atomos Shinobi.
- Go to the "Settings" menu in your Atomos Shinobi.
- Choose "LUTs".
- Choose "Load LUT".
- Navigate to the USB flash drive and choose the LUT file you need to set up.
- Choose "Load".
The LUT will now be put in in your Atomos Shinobi. You may preview your footage with the LUT utilized by deciding on the LUT within the “LUTs” menu.
Folks Additionally Ask
How do I create my very own LUTs?
There are a number of software program applications that you need to use to create your individual LUTs. Some standard choices embody DaVinci Resolve, LUTCalc, and Colour Finale. After getting created your LUTs, you may export them in .dice format and set up them in your Atomos Shinobi.
Can I exploit LUTs from different sources?
Sure, you need to use LUTs from different sources, comparable to web sites or boards. Nonetheless, you will need to guarantee that the LUTs are appropriate along with your Atomos Shinobi. The LUTs have to be in .dice format and so they have to be designed to be used with Log footage.
How do I delete LUTs from my Atomos Shinobi?
To delete LUTs out of your Atomos Shinobi, go to the “Settings” menu and choose “LUTs”. Then, choose the LUT you need to delete and press the “Delete” button.
