Placing on a lens keeper is a straightforward however necessary step within the technique of carrying contact lenses. This machine helps to maintain your lenses clear and guarded when they don’t seem to be in use. By following a couple of easy steps, you possibly can be certain that your lens keepers are placed on accurately and that your contact lenses are protected and comfy to put on.
Step one is to clean your fingers totally with cleaning soap and water. This may assist to stop any micro organism or grime from getting in your lenses or lens keepers. As soon as your fingers are clear, open the lens keeper and fill it with contemporary contact lens answer. Ensure that to fill the keeper to the fill line, however don’t overfill it. Then, place your contact lens within the keeper, ensuring that it’s fully submerged within the answer. Shut the keeper tightly and shake it gently to combine the answer and to make sure that the lens is clear. Repeat this course of for the opposite contact lens.
As soon as your contact lenses are within the lens keepers, you possibly can retailer them in a cool, dry place. Don’t retailer them within the fridge, as this could injury the lenses. If you end up able to put on your contact lenses, merely take away them from the lens keepers and rinse them with contemporary contact lens answer. Then, insert the lenses into your eyes. By following these easy steps, you possibly can assist to make sure that your contact lenses are clear and protected to put on.
Gathering Important Supplies
Earlier than you start the method of placing on Lens Keeper, it’s essential to assemble all the required supplies. These supplies will guarantee that you’ve got a clean and comfy expertise. This is what you may want:
Supplies Checklist
Here’s a complete listing of important supplies:
1. Lens Keeper machine: That is the first machine that can provide help to insert and take away your contact lenses. It is a small, handheld machine with two gentle, versatile cups.
a.Be certain that the Lens Keeper is clear and freed from any particles or injury.
b.Examine the cups for any tears or irregularities.
c.If the Lens Keeper has not been used for an prolonged interval, contemplate soaking it in a contact lens cleansing answer for disinfection.
d.Rinse the Lens Keeper totally with sterile water earlier than use.
2.Contact lenses: These are the corrective lenses that you’ll be inserting into your eyes.
3.Contact lens answer: This answer is used to scrub and retailer your contact lenses. Ensure that to make use of an answer that’s advisable in your particular sort of contact lenses.
4.Mirror: A mirror will provide help to see what you are doing when inserting and eradicating your contact lenses.
5.Tissue or towel: This will probably be used to dry your fingers earlier than dealing with your contact lenses.
Aligning the Lenses
Aligning the lenses accurately is essential for optimum lens efficiency and comfy put on. Comply with these steps to make sure correct alignment:
1. Learn the Lens Orientation Directions
Seek the advice of the packaging or directions supplied along with your lens keeper to find out the right orientation of the lenses.
2. Place the Lenses in Their Designated Slots
The lens keeper usually has two slots, one for every lens. Gently place every lens within the corresponding slot, making certain they’re dealing with the proper course.
3. Verify the Alignment Markers
Most lens keepers have alignment markers or indents that point out the proper place for the lenses. Align the lenses with these markers to make sure they’re correctly seated.
4. Double-Verify the Alignment
As soon as the lenses are in place, gently faucet the lens keeper to settle them. Examine the lenses once more to make sure they’re accurately aligned. If any lens seems misaligned, fastidiously alter it whereas concurrently holding down the alternative lens.
| Troubleshooting Alignment Points | Options |
|---|---|
| Lenses should not sitting flush | Make sure the lenses are correctly aligned with the markers. Gently faucet the lens keeper to settle them additional. |
| Lenses are tilted | Reposition the lenses by fastidiously lifting one edge and adjusting it whereas holding down the alternative lens. |
| Lenses are overlapping | Take away the lenses and reinsert them separately, making certain they’re dealing with the proper course. |
Securing the Lid
Efficiently securing the lid is essential for making certain a correct seal and stopping moisture or particles from getting into the lens keeper. Comply with these detailed steps to finish this activity successfully:
1. Align the Lid Correctly
Be certain that the lid is positioned accurately over the bottom of the lens keeper. It ought to match snugly into place with no gaps or misalignments.
2. Rotate the Lid Clockwise
As soon as the lid is correctly aligned, start rotating it clockwise. Apply light however agency stress to safe the lid. You could really feel a slight resistance because it tightens.
3. Proceed Rotating Till Resistance
Proceed rotating the lid till you’re feeling a noticeable resistance. This means that the lid has been totally tightened and secured.
4. Verify for Tightness
To make sure a safe match, attempt to pull the lid off the bottom. If it stays fastened, the lid is sufficiently secured.
5. Wipe Off Extra Moisture
After securing the lid, use a clear fabric or tissue to wipe away any extra moisture or residue from the lid and base. This helps stop moisture from getting into the lens keeper.
6. Optionally available: Extra Securing Strategies
For added safety, contemplate using these non-obligatory strategies:
| Technique | Steps |
|---|---|
| Tape | Wrap a small piece of tape across the lid and base to bolster the seal. |
| Elastic Band | Wrap an elastic band across the lid and base to take care of a safe match. |
| Shrink Wrap | Use shrink wrap to cowl all the lens keeper, making certain a good seal and defending the lenses from moisture. |
Troubleshooting Widespread Points
When inserting your lens into the Lens Keeper, it’s possible you’ll encounter some frequent points. Listed here are some options:
1. Lens just isn’t becoming correctly
Fastidiously alter the lens till it sits snugly within the designated spot.
2. Lens just isn’t seen
Be certain that the lens is dealing with the proper method. Flip it over if obligatory.
3. Lid just isn’t closing
Make it possible for the lid is aligned accurately and isn’t obstructed by any particles.
4. Lens is falling out
The lens might not be seated correctly. Take away and reinsert it, ensuring to use light stress.
5. Lid is just too tight
Apply slight stress on each side of the lid to launch it. Watch out to not use extreme pressure.
6. Lens is scratched
Keep away from touching the lens straight along with your fingers. Use a gentle fabric or lens cleansing equipment to scrub it gently.
7. Lens is soiled
Use a lens cleansing answer or wipes to take away any grime or particles.
8. Lens is cracked or broken
If the lens is severely broken, discontinue use and seek the advice of with a watch care skilled.
9. Lens just isn’t popping up
Guarantee that you’re urgent the discharge button firmly. If the lens nonetheless doesn’t pop up, gently faucet the Lens Keeper on a flat floor to dislodge it. Alternatively, you should utilize a small object like a toothpick to softly pry the lens out.
| Troubleshooting Steps | Attainable Options |
|---|---|
| – Press the discharge button firmly | – The lens ought to pop up |
| – Faucet the Lens Keeper on a flat floor | – This will likely dislodge the lens |
| – Use a small object to softly pry the lens out | – Watch out to not injury the lens |
How To Put On Lens Keeper
Inserting contact lenses is usually a daunting activity, nevertheless it turns into much more difficult when it’s important to use a lens keeper. A lens keeper is a small, spherical machine that helps to maintain your contact lenses in place. It may be fabricated from a wide range of supplies, together with silicone, hydrogel, and PMMA. Lens keepers can be found in numerous shapes and sizes to accommodate various kinds of contact lenses.
To placed on a lens keeper, first wash your fingers totally. Then, rinse the lens keeper with saline answer. Subsequent, place the lens keeper in your finger, after which place the contact lens on prime of the lens keeper. Lastly, gently insert the lens keeper into your eye. The lens keeper will assist to maintain the contact lens in place, and it’ll additionally defend the contact lens from injury.
Folks Additionally Ask About How To Put On Lens Keeper
How do I select the suitable lens keeper?
The most effective lens keeper for you’ll rely on the kind of contact lenses you put on. For those who put on gentle contact lenses, you will want a lens keeper that’s fabricated from a gentle materials, reminiscent of silicone or hydrogel. For those who put on onerous contact lenses, you will want a lens keeper that’s fabricated from a extra sturdy materials, reminiscent of PMMA.
How typically ought to I clear my lens keeper?
You must clear your lens keeper day by day. This may assist to stop the build-up of micro organism and different contaminants.
Can I sleep with my lens keeper in?
No, you shouldn’t sleep along with your lens keeper in. This could enhance your threat of growing a watch an infection.
