2. How To Remove Prius Antenna Base 2013

2. How To Remove Prius Antenna Base 2013

In right this moment’s technologically superior world, eradicating an antenna base from a automobile might not look like a frightening process. Nonetheless, if you end up needing to take away the Prius Antenna Base out of your 2013 mannequin, it is important to method the method with care and precision. This information will give you a step-by-step method to make sure a clean and profitable antenna base elimination with out inflicting any harm to your automobile. Observe these directions rigorously, and you will be again on the street with a smooth, antenna-free Prius very quickly.

Earlier than embarking on the antenna base elimination course of, it is essential to collect the required instruments. These embrace a Phillips head screwdriver, a flathead screwdriver, a plastic pry instrument, and a clear rag. It is also a good suggestion to park your Prius on a stage floor and interact the parking brake for added stability. With the instruments in hand and the automobile ready, you possibly can proceed with the antenna base elimination.

To start the elimination course of, find the antenna base on the roof of your Prius. It will likely be located close to the middle of the roof, and you may discover a small, spherical plastic cap overlaying the bottom. Gently use the flathead screwdriver to pry off the cap, revealing the antenna base and its mounting bolts. Utilizing the Phillips head screwdriver, rigorously unscrew the mounting bolts and take away the antenna base from the roof. Be sure you maintain the bottom securely as you take away it to forestall it from falling and inflicting harm. As soon as the antenna base is eliminated, you possibly can clear the mounting floor with the clear rag to take away any dust or particles earlier than reinstalling the cap.

Understanding the Prius Antenna Base

The Prius antenna base is a vital part of the automobile’s communication system, facilitating wi-fi communication with different gadgets. It’s sometimes situated on the roof of the automobile and includes a number of key parts:

Antenna Mast: The antenna mast is a metallic rod that extends vertically from the bottom and is liable for receiving and transmitting radio alerts.

Base Plate: The bottom plate is a metallic disk that attaches the antenna mast to the automobile’s roof. It ensures a safe and steady connection between the antenna and the automobile.

Floor Aircraft: The bottom aircraft is a metallic sheet situated beneath the bottom plate. It acts as a reflective floor for radio alerts, enhancing the effectivity of the antenna.

Wiring Harness: The wiring harness connects the antenna base to the automobile’s electrical system. It permits the switch {of electrical} alerts between the antenna and different elements, such because the radio or navigation system.

Gathering the Obligatory Instruments

To efficiently take away the Prius antenna base from the 2013 mannequin, having the suitable instruments is essential. The next gadgets are important for this process:

Important Instruments

Software Objective
Torx T20 Bit Take away the antenna base from the roof
Flathead Screwdriver Gently pry open the antenna cowl
Adjustable Wrench Tighten or loosen the antenna wire
Electrical Tape Insulate and defend the uncovered wire

Optionally available Instruments

Along with the important instruments, the next gadgets might improve the method:

Work gloves: Shield your fingers whereas working with sharp objects

Stepladder: If mandatory, to entry the antenna base on the roof

Antenna base alternative: If the outdated base wants changing

Getting ready the Automobile for Elimination

A number of measures should be taken to make sure a clean antenna base elimination course of on a 2013 Prius:

1. Security Precautions

Earlier than commencing any work, it’s essential to make sure the automobile is parked on a stage and steady floor. Interact the parking brake to forestall any sudden motion.

2. Clear and Safe the Work Space

Totally clear the realm across the antenna base to take away any dust or particles that might intrude with the elimination course of. Shield the automobile’s exterior by spreading a clear fabric or towel over the roof.

3. Disconnecting the Battery (for Automated Automobiles)

For autos geared up with an automatic security system, it’s essential to disconnect the battery earlier than trying antenna base elimination. This significant step ensures that no electrical faults or malfunctions happen in the course of the course of. Seek the advice of the automobile’s proprietor’s handbook for particular battery disconnection directions.

Step Motion
1. Find and disconnect the detrimental battery terminal (normally marked with a black or blue cowl).
2. Securely fasten the disconnected terminal away from the battery to forestall any unintentional reconnection.
3. Wait for about 10 minutes to permit {the electrical} system to totally discharge.

Eradicating the Plastic Cowl

Find the plastic cowl that surrounds the antenna base. It is normally a black or grey piece that snaps into place. Utilizing a trim elimination instrument or a flathead screwdriver, gently pry the quilt free. Watch out to not harm the plastic clips that maintain it in place.

Eradicating the Screws

As soon as the quilt is eliminated, you will see two screws holding the antenna base to the roof of the automotive. Use a Phillips head screwdriver to take away these screws.

Unplugging the Antenna Cable

Beneath the antenna base, you will discover the antenna cable connector. It is normally a white or black plug. Press the discharge button on the connector and pull it straight as much as unplug it.

Lifting Off the Antenna Base

Now you possibly can merely raise the antenna base straight as much as take away it from the roof of the automotive. Watch out to not drop it, as it may be simply broken if it falls.

Disconnecting the Antenna’s Electrical Connector

This step includes separating {the electrical} connection between the antenna and the bottom. Proceed with warning to forestall any harm to the fragile electrical elements.

**Supplies Required:**

Software
Small flathead screwdriver

**Steps:**

  1. Find {the electrical} connector on the base of the antenna. It’s normally lined by a small rubber or plastic cap.
  2. Rigorously use the flathead screwdriver to pry open the cap and expose the connector.
  3. Maintain the connector firmly and pull it straight as much as disconnect it from the antenna base.
  4. As soon as disconnected, gently pull the antenna wire out of the best way to forestall any interference in the course of the subsequent steps.
  5. Notice the orientation of the connector and the wire as you disconnect them. This data might be essential when reconnecting the antenna in a while. Correct alignment ensures optimum electrical contact and sign reception. Take note of the situation of the locking tabs or clips that safe the connector in place, as they might range relying on the particular mannequin 12 months and trim stage. Moreover, examine the situation of the connector and the wire for any harm or corrosion. If any points are noticed, seek the advice of a certified auto electrician for additional help.

Unbolting the Antenna Base

6. Undo the Bolts Utilizing a Socket Wrench

The ultimate step is to take away the bolts holding the antenna base in place. For this, you will have a socket wrench with the suitable dimension socket (sometimes 10mm or 12mm). This is methods to proceed:

  1. Insert the socket into the bolt head and guarantee it is securely seated.
  2. Flip the socket wrench counterclockwise to loosen the bolt.
  3. Proceed turning the wrench till the bolt turns into free sufficient to take away by hand.
  4. Repeat the method for the remaining bolts.
Bolt Measurement Socket Measurement
10mm 10mm Socket
12mm 12mm Socket

As soon as all of the bolts are eliminated, it’s best to have the ability to raise the antenna base straight up and off the roof of your Prius. Deal with the bottom with care to keep away from damaging the fragile connections or wires.

Lifting the Antenna Base Off the Automobile

Listed here are the steps to raise the antenna base off the automobile.

  1. Place a skinny fabric or towel over the antenna base to guard it from scratches.
  2. Utilizing a flat-head screwdriver or a pry instrument, gently pry up the sides of the antenna base.
  3. Work across the base, prying it up slightly bit at a time till it loosens from the automotive.
  4. As soon as the bottom is free, gently raise it off the automotive.
  5. Watch out to not harm the antenna wire or the automotive’s paint when eradicating the bottom.
  6. If the bottom is caught, you possibly can strive utilizing a warmth gun or hair dryer to melt the adhesive.
  7. As soon as the bottom is eliminated, you will notice the antenna wire. Disconnect the wire from the bottom by urgent on the discharge button or tab.
Doable Issues Options
The antenna base is caught Use a warmth gun or hair dryer to melt the adhesive.
The antenna wire is broken Substitute the antenna wire.

Inspecting the Base

Earlier than you start eradicating the antenna base, it is important to examine it rigorously. Search for any indicators of injury, reminiscent of cracks or dents. If there may be any important harm, it’s possible you’ll want to switch the complete base earlier than putting in a brand new antenna. Moreover, verify the connection between the antenna base and the roof of the automobile to make sure it is safe.

Examine the antenna base for any corrosion or rust. Corrosion can weaken the bottom and make it tougher to take away. If there may be any corrosion, it could have to be cleaned or handled earlier than eradicating the antenna base.

Substitute Elements

After getting inspected the bottom and decided that it must be changed, you will have to collect the required alternative elements. This features a new antenna base and, in some instances, a brand new gasket or seal. Be sure you select alternative elements which might be appropriate along with your particular Prius mannequin and 12 months.

Here’s a checklist of the alternative elements it’s possible you’ll want:

Half Description
Antenna base The primary element that holds the antenna in place
Gasket or seal A rubber or plastic element that helps stop water from leaking into the automobile

Eradicating the Previous Antenna Base

1. Find the antenna base on the roof of your Toyota Prius. It’s normally positioned close to the middle of the roof.
2. Use a Phillips head screwdriver to take away the 2 screws which might be holding the antenna base in place.
3. Rigorously raise the antenna base off the roof. Don’t pull on the antenna wire.
4. Disconnect the antenna wire from the antenna base.
5. Take away the outdated antenna base from the roof.

Putting in the New or Refurbished Antenna Base

1. Join the antenna wire to the brand new or refurbished antenna base.
2. Place the brand new or refurbished antenna base on the roof.
3. Safe the antenna base in place utilizing the 2 screws that you simply eliminated in Step 2.
4. Tighten the screws till they’re cosy.
5. Test to be sure that the antenna wire is securely linked to the antenna base.
6. Check the antenna to be sure that it’s working correctly.

Further Ideas

7. In case you are having hassle eradicating the outdated antenna base, you need to use a pair of pliers to softly pry it off the roof.
8. In case you are changing the antenna base with a brand new one, it’s possible you’ll must buy an adapter to attach the brand new antenna base to the antenna wire.
9. When putting in the brand new or refurbished antenna base, be sure that the bottom is stage and that the antenna wire is just not kinked or broken. Correct set up will assist make sure the optimum efficiency of your Prius’s antenna, permitting for clear and dependable radio reception. Common upkeep and inspections of the antenna base, together with any mandatory cleansing or changes, can additional contribute to its longevity and effectiveness.

Reassembling the Antenna System

As soon as the antenna base has been eliminated, it is time to reassemble the antenna system. Observe these steps to make sure a safe and correct set up:

  1. Place the gasket over the antenna base: Align the gasket with the notch on the bottom and gently press it into place.
  2. Insert the antenna into the bottom: Rigorously insert the antenna into the bottom till it clicks into place.
  3. Tighten the retaining nut: Utilizing a wrench, tighten the retaining nut on the bottom to safe the antenna.
  4. Reattach the quilt: Align the quilt with the bottom and snap it again into place.
  5. Substitute the bolt: Insert the bolt into the opening within the base and tighten it with a wrench.
  6. Reinstall the nut: Screw the nut onto the bolt and tighten it with a wrench.
  7. Join the antenna wire: Plug the antenna wire into the connector on the antenna base.
  8. Wrap the wire: Wrap the antenna wire across the base to guard it and supply pressure aid.
  9. Safe the wire: Use cable ties or electrical tape to safe the wire alongside the antenna.
  10. Check the antenna: Begin the automobile and verify if the radio is receiving alerts correctly.

Further Data:

Element Description
Gasket A rubber seal that stops water and particles from getting into the antenna base.
Retaining Nut A metallic nut that secures the antenna to the bottom.
Cowl A plastic cowl that protects the antenna and electrical connections.
Bolt A metallic bolt that holds the antenna base to the automobile.
Nut A metallic nut that secures the bolt in place.

How To Take away Prius Antenna Base 2013

The antenna base on a 2013 Prius is situated on the roof of the automobile, close to the middle. It’s a black, plastic base that the antenna screws into. To take away the antenna base, you will have a Phillips head screwdriver.

  1. Park the Prius in a secure location.
  2. Flip off the engine and open the hood.
  3. Find the antenna base on the roof of the automobile.
  4. Use the screwdriver to take away the 2 screws that maintain the antenna base in place.
  5. As soon as the screws are eliminated, you possibly can pull the antenna base straight as much as take away it.

Folks Additionally Ask

How do I take away the antenna base on a 2013 Prius?

To take away the antenna base on a 2013 Prius, you will have a Phillips head screwdriver. After getting the screwdriver, comply with these steps:

  1. Park the Prius in a secure location.
  2. Flip off the engine and open the hood.
  3. Find the antenna base on the roof of the automobile.
  4. Use the screwdriver to take away the 2 screws that maintain the antenna base in place.
  5. As soon as the screws are eliminated, you possibly can pull the antenna base straight as much as take away it.

The place is the antenna base situated on a 2013 Prius?

The antenna base on a 2013 Prius is situated on the roof of the automobile, close to the middle. It’s a black, plastic base that the antenna screws into.

What instruments do I must take away the antenna base on a 2013 Prius?

To take away the antenna base on a 2013 Prius, you will have a Phillips head screwdriver.