Foam cannons are an important instrument for any automotive fanatic, and the Selkie Foam Cannon is likely one of the hottest available on the market. It is easy to make use of and produces a thick, wealthy foam that may enable you to clear your automotive shortly and successfully. Nonetheless, in case you’re not aware of foam cannons, you might not know how one can take it aside to scrub it or substitute components. This information will present you how one can do it in a number of easy steps.
Earlier than you start, collect your instruments. You have to a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. After getting your instruments, observe these steps to disassemble your Selkie Foam Cannon:
1. Take away the nozzle from the cannon. To do that, merely unscrew the nozzle by turning it counterclockwise.
2. Take away the filter from the cannon. To do that, use the flat head screwdriver to pry the filter out of the cannon.
3. Take away the mesh display from the cannon. To do that, use the pliers to drag the mesh display out of the cannon.
Gathering Needed Instruments
Earlier than you start disassembling your Selkie Foam Cannon, it is essential to assemble the mandatory instruments to make sure a clean and environment friendly course of. Here is a complete checklist of the advisable instruments:
Security Gear:
| Merchandise | Objective |
|---|---|
| Gloves | Shield arms from chemical substances |
| Security Glasses | Forestall eye accidents from flying particles |
Disassembly Instruments:
| Merchandise | Objective |
|---|---|
| Phillips Screwdriver | Unscrew Phillips head screws |
| Flathead Screwdriver | Pry aside elements, equivalent to o-rings |
| Allen Key | Take away screws that require an Allen key |
| Needle Nostril Pliers | Grip and take away small components, equivalent to O-rings |
Cleansing and Upkeep Instruments:
| Merchandise | Objective |
|---|---|
| Comfortable Material | Wipe away filth and particles |
| Lubricant | Apply to O-rings and transferring components for clean operation |
| Water Container | For rinsing and cleansing elements |
Security Precautions to Take into account
Previous to dismantling your Selkie Foam Cannon, it is important to look at sure security measures to forestall any potential hazards or accidents.
1. Disconnect from Water Supply
Earlier than trying to disassemble the froth cannon, be sure that it’s disconnected from the water supply. It will forestall any unintended water discharge or spraying in the course of the disassembly course of.
2. Put on Protecting Gear
When dealing with the froth cannon elements, it is advisable to put on applicable protecting gear, equivalent to gloves, security glasses, and a masks. That is particularly vital if the froth cannon has been used with harsh chemical substances or cleaners, as these could emit dangerous fumes or residue. The next desk offers a extra detailed breakdown of the advisable protecting gear:
| Protecting Gear | Objective |
|---|---|
| Gloves | Shield arms from chemical substances, abrasions, and sharp edges |
| Security Glasses | Defend eyes from flying particles, chemical substances, and splashes |
| Masks | Forestall inhalation of dangerous fumes or particles |
3. Guarantee Secure Setting
Choose a secure and well-lit surroundings for disassembling the froth cannon. Keep away from working in areas with extreme wind or moisture, as these situations could make the method tougher and probably hazardous.
Disconnecting the Cannon from Water Provide
To soundly detach the Selkie Foam Cannon out of your stress washer, observe these steps:
- Shut off the water provide: Flip off the tap or valve supplying water to the stress washer.
- Launch the stress: Squeeze the set off on the stress washer wand to launch any remaining water stress.
-
Disconnect the Cannon:
Technique Description Fast-connect becoming: Find the quick-connect becoming on the cannon’s finish and pull it straight again to disconnect. Guarantee to use agency stress to launch the coupling. Threaded connection: Unscrew the threaded collar connecting the cannon to the stress washer’s wand by turning it counterclockwise. Use a wrench or pliers for a safe grip. - Examine the connections: Examine the becoming or threads for indicators of harm or put on earlier than reattaching the cannon.
Eradicating the Exterior Shell
1. Take away the Nozzle
Find the nozzle connected to the tip of the froth cannon. Twist the nozzle counterclockwise to take away it.
2. Unscrew the Base
Establish the bottom of the froth cannon, which connects it to the stress washer hose. Utilizing an adjustable wrench, loosen and take away the bottom by turning it counterclockwise.
3. Pull Aside the Physique
Gently pull the physique of the froth cannon aside from the bottom. The physique ought to slide off simply, revealing the inner elements.
4. Disassemble the Mixing Chamber
Find the blending chamber, which is the cylindrical element contained in the physique of the froth cannon. It consists of:
| Part | Description |
|---|---|
| Mixing Ball | A small, spherical machine that creates turbulence and helps combine the cleaning soap and water. |
| Mixing Tube | A hole cylinder that homes the blending ball and directs the answer to the nozzle. |
| O-Ring | A rubber ring that creates a seal between the blending chamber elements. |
To disassemble the blending chamber:
- Take away the blending ball by gently pulling it out of the blending tube.
- Pull aside the blending tube from the physique of the froth cannon.
- Examine and take away any O-rings or seals from the blending chamber elements.
Detaching the Nozzle
The nozzle is the a part of the froth cannon that dispenses the froth. To detach the nozzle, first unscrew the locking ring that’s situated on the base of the nozzle. As soon as the locking ring is free, you possibly can pull the nozzle straight out of the froth cannon.
Step-by-Step Directions for Detaching the Nozzle
| Step | Description |
|---|---|
| 1 | Unscrew the locking ring on the base of the nozzle. |
| 2 | Pull the nozzle straight out of the froth cannon. |
Disassembling the Fast Join Becoming
The short join becoming on a Selkie foam cannon is a small, plastic piece that connects the froth cannon to the stress washer. It’s designed to be fast and straightforward to take away, so to simply clear the froth cannon or change it out for a special one. To disassemble the fast join becoming, observe these steps:
1. Find the fast join becoming on the froth cannon. It’s normally situated on the base of the froth cannon, the place it connects to the stress washer hose.
2. Grip the fast join becoming with one hand and the froth cannon with the opposite hand.
3. Pull the fast join becoming immediately from the froth cannon. It ought to come off simply.
4. If the fast join becoming is caught, you possibly can attempt utilizing a pair of pliers to softly pry it off. Watch out to not harm the becoming.
5. As soon as the fast join becoming is eliminated, you possibly can clear it with cleaning soap and water. You may as well lubricate the becoming with a silicone-based lubricant to assist it transfer extra simply.
6. Insert New Gasket And Grease:
– Inside the fast join becoming, you will discover a small, rubber gasket.
– This gasket helps to create a seal between the becoming and the stress washer hose.
– If the gasket is broken or worn, it could actually trigger the becoming to leak.
– Whenever you reassemble the becoming, you’ll want to examine the gasket and substitute it if needed.
– As soon as you have changed the gasket, apply a small quantity of grease to the within of the becoming.
– It will assist to lubricate the becoming and make it simpler to make use of.
7. To reassemble the fast join becoming, merely insert the becoming into the froth cannon and push it on till it clicks into place.
Taking Aside the Cleaning soap Regulator
1. Unscrew the Cleaning soap Regulator Knob
Find the cleaning soap regulator knob on the facet of the froth cannon. It’s normally a small, spherical knob with a deal with.
2. Take away the O-Ring
As soon as the knob is eliminated, you will note a small O-ring contained in the cleaning soap regulator housing. Rigorously take away the O-ring by hand.
3. Take away the Regulator Spring
Beneath the O-ring, you will discover a small spring. Use a pair of needle-nose pliers to softly take away the spring.
4. Take away the Regulator Valve
As soon as the spring is eliminated, the regulator valve could be pulled out of the housing. It’s a small, cylindrical piece with a gap within the middle.
5. Rinse and Dry the Valve and Housing
Rinse the regulator valve and the housing with clear water to take away any cleaning soap residue. Permit them to dry fully earlier than reassembling.
6. Lubricate the O-Ring and Spring
Apply a small quantity of lubrication to the O-ring and spring. It will assist to forestall put on and tear and guarantee clean operation.
7. Reassemble the Regulator
Place the spring again into the housing, then slide the regulator valve over the spring. Insert the O-ring into the groove on the regulator valve. Lastly, screw the cleaning soap regulator knob again into place.
Extra Suggestions for Taking Aside a Selkie Foam Cannon
- Take photos of every step throughout disassembly to facilitate reassembly.
- Use the offered torque wrench to correctly tighten the cleaning soap regulator knob.
- For those who encounter any problem, don’t hesitate to contact Selkie buyer assist for help.
Separating the Lance and Housing
As soon as you have disassembled the quick-connect becoming, it is time to separate the lance from the housing. This course of requires a bit extra drive than the earlier step.
Step 8: Twist and Pull
Grasp the lance firmly with one hand and the housing with the opposite. Twist the lance counterclockwise whereas pulling it away from the housing. The joint ought to break aside with a little bit effort. If needed, use a pair of pliers to softly pry the lance free.
| Step 8: Twist and Pull |
|---|
| Grasp the lance and housing firmly. |
| Twist the lance counterclockwise whereas pulling it away from the housing. |
| If needed, use pliers to pry the lance free. |
Cleansing and Inspecting Parts
As soon as the cannon is disassembled, it is vital to completely clear all of the elements to take away any filth, particles, or residue. It will assist to make sure that the cannon capabilities correctly when reassembled. Use a gentle detergent and heat water to scrub the elements, and you’ll want to rinse them completely earlier than drying them.
As soon as the elements are clear, it is a good suggestion to examine them for any harm or put on and tear. Pay explicit consideration to the o-rings, as these can simply turn out to be broken and trigger leaks. For those who discover any broken elements, it is vital to switch them earlier than reassembling the cannon.
O-Rings
The O-rings are chargeable for making a seal between the totally different elements of the cannon. They will turn out to be broken over time, so it is vital to examine them recurrently and substitute them if needed. When changing the O-rings, you’ll want to use the right dimension and sort of O-ring for the particular element.
Seals
The seals are additionally chargeable for making a seal between the totally different elements of the cannon. They will additionally turn out to be broken over time, so it is vital to examine them recurrently and substitute them if needed. When changing the seals, you’ll want to use the right dimension and sort of seal for the particular element.
Nozzles and Suggestions
The nozzles and ideas are chargeable for creating the stream of froth that the cannon produces. They will turn out to be clogged over time, so it is vital to scrub them recurrently. To wash the nozzles and ideas, use a gentle brush and heat water. You should definitely rinse them completely earlier than drying them.
Reassembling the Cannon
After getting cleaned and inspected the person elements of your Selkie foam cannon, it is time to reassemble it.
1. Insert the Ball Bearing into the Nozzle Physique
Find the small ball bearing and insert it into the nozzle physique, guaranteeing it sits securely in place.
2. Insert the Nozzle Physique into the Venturi
Align the nozzle physique with the venturi and gently slide it in till it sits flush towards the internal floor.
3. Screw on the Adjustable Nozzle
Thread the adjustable nozzle onto the nozzle physique and hand-tighten it. Use a wrench if essential to additional tighten it.
4. Insert the O-Ring into the Nozzle Physique
Take the O-ring and place it across the base of the nozzle physique.
5. Screw on the Brass Nozzle
Thread the brass nozzle onto the nozzle physique, guaranteeing that the O-ring is compressed between the 2 elements.
6. Insert the Chemical Tube into the Cleaning soap Reservoir
Push the chemical tube into the cleaning soap reservoir till it reaches the underside, guaranteeing a comfortable match.
7. Insert the Cleaning soap Reservoir into the Venturi
Align the cleaning soap reservoir with the venturi and slide it in till it clicks into place.
8. Screw on the Stress Washer Connection
Thread the stress washer connection onto the physique of the froth cannon and hand-tighten it. Use a wrench if essential to additional tighten it.
9. Insert the Spray Tip
Insert the spray tip into the highest of the adjustable nozzle, ensuring it sits securely.
10. Check the Foam Cannon
Connect the froth cannon to your stress washer, join it to a water supply, and switch it on. Regulate the nozzle as needed to realize the specified foam consistency. Examine for any leaks and make sure the foam cannon is working appropriately earlier than utilizing it together with your cleansing resolution.
How you can Take Aside a Selkie Foam Cannon
Taking aside a Selkie foam cannon is a straightforward course of that may be accomplished in only a few minutes. By following these steps, you possibly can be sure that your foam cannon is correctly cleaned and maintained, which is able to assist it to carry out at its greatest. You have to the next instruments to disassemble the cannon: a Phillips head screwdriver and a pair of pliers.
- Unscrew the highest cap of the froth cannon utilizing the Phillips head screwdriver.
- Take away the internal physique of the froth cannon from the outer physique.
- Use the pliers to take away the nozzle from the internal physique.
- Unscrew the filter display from the underside of the internal physique.
- Rinse all the components completely with water.
- Reassemble the froth cannon within the reverse order of disassembly.
Folks Additionally Ask About How you can Take Aside a Selkie Foam Cannon
How typically ought to I take aside my Selkie foam cannon?
It’s endorsed to take aside your Selkie foam cannon each 2-3 months for cleansing and upkeep. It will assist to forestall the build-up of cleaning soap scum and different particles, which may clog the nozzle and trigger the froth cannon to malfunction.
What’s the easiest way to scrub a Selkie foam cannon?
The easiest way to scrub a Selkie foam cannon is to make use of a gentle cleaning soap resolution and a gentle fabric. Keep away from utilizing harsh chemical substances or abrasive cleaners, as these can harm the froth cannon.
Can I exploit my Selkie foam cannon with different forms of cleaning soap?
Sure, you should use your Selkie foam cannon with different forms of cleaning soap. Nonetheless, you will need to word that some soaps could produce extra foam than others. If you’re utilizing a brand new kind of cleaning soap, it’s best to start out with a low focus and steadily enhance the quantity till you obtain the specified stage of froth.
