Endeavor the duty of dismantling an Xbox One console could be a daunting prospect, particularly for these unfamiliar with the intricate inside workings of digital gadgets. Nevertheless, with the precise instruments, a gentle hand, and a cautious strategy, it’s durchaus doable to disassemble the console efficiently. This complete information will give you step-by-step directions, accompanied by detailed photos, that will help you navigate the method with confidence. Whether or not you’re aiming to exchange defective parts, carry out upkeep, or just fulfill your curiosity, this information will empower you with the information and strategies essential to take aside your Xbox One console.
Earlier than embarking on this disassembly course of, it’s crucial to emphasise the significance of security precautions. Make sure that the console is totally powered down and disconnected from any energy sources. Furthermore, it’s advisable to work in a well-lit and clear workspace to attenuate the chance of shedding small parts or encountering any surprising hazards. Moreover, we strongly suggest that you simply seek the advice of the official Xbox One service handbook for additional steering and security info particular to your specific console mannequin.
To provoke the disassembly course of, we are going to start by eradicating the outside panels of the console. This includes fastidiously prying open the plastic clips that safe the panels in place. As soon as the panels are indifferent, you’ll have entry to the interior parts of the Xbox One. The following step is to disconnect numerous cables and connectors which are hooked up to the motherboard. This consists of the ability provide cable, the laborious drive cable, and the optical drive cable. Proceed with warning and use applicable instruments to keep away from damaging these delicate parts.
Dismantling the Outer Shell
Approaching the Xbox One with warning, you will discover the smooth facade that conceals its inside workings. Start your disassembly by flipping the console the wrong way up and finding the rubber ft. These unintimidating protectors will be simply eliminated by gently prying them free with a spudger or plastic opening instrument. Beneath them, you will uncover a sequence of T9 Torx safety screws – the gatekeepers to the console’s secrets and techniques.
Utilizing an applicable T9 Torx driver, fastidiously unscrew every screw, amassing them in a safe location to forestall any mishaps. As soon as all screws are eliminated, it is time to gently raise the outer shell away from the primary physique of the console. Watch out for any hidden clips or tabs that will maintain the shell in place; use a plastic opening instrument to navigate these obstacles with finesse.
As you separate the outer shell, be aware of the varied cables and connectors that bridge the hole between it and the console’s inside. These delicate connections require cautious dealing with, so proceed with utmost warning to keep away from any injury that would hinder your progress.
Eradicating the Optical Drive
With the outer shell efficiently eliminated, you will achieve entry to the Xbox One’s optical drive. To detach it, find the 2 screws securing it to the chassis and take away them with a T10 Torx driver. Gently raise the drive straight up, being conscious of the cables hooked up to it. Disconnect these cables by squeezing their retaining clips and pulling them free.
Disconnecting the Energy Provide
Subsequent, flip your consideration to the ability provide, the guts that fuels the Xbox One’s electrical wants. It is secured by 4 screws – two on the high and two on the backside – which will be eliminated with a T10 Torx driver. Rigorously raise the ability provide out of the chassis, being cautious of the cables that join it to the motherboard and different parts.
Eradicating Inner Elements
As soon as the Xbox One’s casing has been eliminated, it is time to begin eradicating the interior parts. To do that, you will want just a few instruments, together with a screwdriver, a pair of tweezers, and a plastic spudger.
Disconnecting the Energy Provide
With the casing eliminated, you will see the Xbox One’s energy provide on the right-hand facet of the console. To disconnect the ability provide, merely unplug the 2 cables which are linked to it. The primary cable is the primary energy cable, which is linked to the again of the ability provide. The second cable is a smaller cable that’s linked to the entrance of the ability provide.
Eradicating the Fan
As soon as the ability provide has been disconnected, you possibly can take away the fan. To do that, merely unscrew the 4 screws which are holding the fan in place after which raise the fan out of the console.
Eradicating the Optical Drive
The optical drive is positioned on the left-hand facet of the Xbox One console. To take away the optical drive, you will want a plastic spudger. First, insert the spudger into the small gap on the entrance of the optical drive after which pry the optical drive out of the console.
Eradicating the Motherboard
The motherboard is positioned in the course of the Xbox One console. To take away the motherboard, you will want a screwdriver. First, take away the 4 screws which are holding the motherboard in place after which raise the motherboard out of the console.
Disconnecting Energy Provide
1. Energy Down and Unplug the Console
Start by turning off the Xbox One console and unplugging the ability twine from the again of the system. Permit a couple of minutes for the console to totally energy down and discharge any residual electrical energy.
2. Take away the Exterior Energy Provide
Find the exterior energy provide brick, which is linked to the console through a spherical energy cable. Gently pull on the ability cable to disconnect the ability provide from the console.
3. Separating the Energy Provide from the Cable
Maintain the ability provide unit in a single hand and the ability cable within the different. Align the discharge button on the ability provide unit with the corresponding notch on the ability cable. Grasp the perimeters of the ability cable close to the discharge button and pull firmly downwards, whereas concurrently urgent on the discharge button. This may disengage the ability cable from the ability provide unit.
| Step | Motion |
|---|---|
| 1 | Maintain the ability provide and energy cable. |
| 2 | Align the discharge button and notch on the ability provide and cable. |
| 3 | Pull down on the cable whereas urgent the discharge button. |
Isolating the Motherboard
To entry the motherboard, you could take away the next parts:
- Energy provide
- Blu-ray drive
- Laborious drive
- Wi-fi adapter
As soon as these parts are eliminated, you will want to disconnect the next cables:
| Cable | Disconnect from |
|---|---|
| Energy cable | Energy provide |
| SATA knowledge cable | Laborious drive |
| Wi-Fi antenna cable | Wi-fi adapter |
After the cables are disconnected, you possibly can raise the motherboard out of the Xbox One case. Watch out to not injury the motherboard or any of its parts.
Eradicating the Energy Provide
The facility provide is positioned behind the Xbox One case. It’s held in place by 4 screws. To take away the ability provide, observe these steps:
1.
Take away the 4 screws that safe the ability provide to the case.
2.
Grip the ability provide and pull it straight out of the case.
Eradicating the Blu-ray Drive
The Blu-ray drive is positioned within the entrance of the Xbox One case. It’s held in place by 4 screws. To take away the Blu-ray drive, observe these steps:
1.
Take away the 4 screws that safe the Blu-ray drive to the case.
2.
Pull the Blu-ray drive straight out of the case.
Eradicating the Laborious Drive
The laborious drive is positioned on the facet of the Xbox One case. It’s held in place by two screws. To take away the laborious drive, observe these steps:
1.
Take away the 2 screws that safe the laborious drive to the case.
2.
Grip the laborious drive and pull it straight out of the case.
Eradicating the Wi-fi Adapter
The wi-fi adapter is positioned on the again of the Xbox One case. It’s held in place by one screw. To take away the wi-fi adapter, observe these steps:
1.
Take away the screw that secures the wi-fi adapter to the case.
2.
Grip the wi-fi adapter and pull it straight out of the case.
Dismantling the Laborious Drive
Step 1: Take away the Energy Cable and HDMI Cable
Earlier than you start, disconnect the Xbox One from any energy sources and take away all exterior cables, together with the HDMI cable.
Step 2: Flip the Xbox One and Take away the Backside Screws
Flip the Xbox One the wrong way up and find the seven screws on the underside. Use a Torx T10 screwdriver to take away these screws, taking care to not strip the heads.
Step 3: Elevate the Backside Panel
As soon as all seven screws are eliminated, fastidiously raise the underside panel away from the remainder of the console. Don’t drive it, as there could also be wires hooked up.
Step 4: Find the Laborious Drive
The laborious drive is an oblong steel field positioned within the heart of the console. It is going to have a black SATA cable hooked up to it.
Step 5: Disconnect the SATA Cable
Pull the SATA cable connector straight out from the laborious drive. Don’t twist or bend the cable.
Step 6: Take away the Laborious Drive Screws
Use a Torx T6 screwdriver to take away the 4 screws that safe the laborious drive to the console body. These screws are positioned on the perimeters of the laborious drive.
Step 7: Gently Pull the Laborious Drive
As soon as the screws are eliminated, fastidiously pull the laborious drive straight up out of the console. Watch out to not injury the laborious drive or the console body.
| Step | Description |
|---|---|
| 1 | Disconnect energy and HDMI cables |
| 2 | Flip Xbox One and take away backside screws |
| 3 | Elevate the underside panel |
| 4 | Find the laborious drive |
| 5 | Disconnect the SATA cable |
| 6 | Take away the laborious drive screws |
| 7 | Gently pull the laborious drive |
How To Take Aside Xbox One
If you happen to’re experiencing issues along with your Xbox One, one of many first steps you possibly can take is to disassemble it and examine it for any bodily injury. Whereas this isn’t a troublesome course of, you will need to observe the directions fastidiously to keep away from damaging your console.
To get began, you will want a Phillips #1 screwdriver and a Torx T10 screwdriver. Additionally, you will want a plastic spudger or a skinny, flat object that will help you pry open the console.
Upon getting gathered your instruments, observe these steps to disassemble your Xbox One:
1. Energy down the console and unplug it from the ability outlet.
2. Take away the 2 Phillips #1 screws on the again of the console, close to the ability port.
3. Use a plastic spudger to pry open the underside of the console. Watch out to not injury the plastic tabs that maintain the console collectively.
4. As soon as the underside of the console is open, use a Torx T10 screwdriver to take away the six screws that maintain the highest of the console in place.
5. Rigorously raise the highest of the console off of the underside. Watch out to not injury the ribbon cables that join the 2 halves of the console.
6. As soon as the highest of the console is off, you possibly can examine the within for any bodily injury. Search for free wires, damaged parts, or the rest that appears misplaced.
7. If you happen to discover any injury, you possibly can attempt to restore it your self or take the console to a professional restore technician.
Folks Additionally Ask About How To Take Aside Xbox One
How do I open the Xbox One S?
To open the Xbox One S, observe the steps outlined above. The one distinction is that you will want to make use of a Torx T9 screwdriver as an alternative of a Torx T10 screwdriver.
How do I disassemble the Xbox One X?
To disassemble the Xbox One X, observe the steps outlined above. The one distinction is that you will want to make use of a Torx T15 screwdriver as an alternative of a Torx T10 screwdriver.
How do I take away the laborious drive from the Xbox One?
To take away the laborious drive from the Xbox One, observe these steps:
1. Energy down the console and unplug it from the ability outlet.
2. Take away the 2 Phillips #1 screws on the again of the console, close to the ability port.
3. Use a plastic spudger to pry open the underside of the console. Watch out to not injury the plastic tabs that maintain the console collectively.
4. As soon as the underside of the console is open, find the laborious drive bay. It’s positioned on the left facet of the console, close to the entrance.
5. Use a Phillips #1 screwdriver to take away the 2 screws that maintain the laborious drive in place.
6. Gently pull the laborious drive out of the bay. Watch out to not injury the ribbon cable that connects the laborious drive to the console.
